Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 May 2005 08:28:50 -0500 (CDT)
From:      Lars Eighner <eighner@io.com>
To:        questions@FreeBSD.ORG
Subject:   HP PSC 1350 and hpoj and usb
Message-ID:  <20050503082805.V20517@goodwill.io.com>

next in thread | raw e-mail | index | archive | help

I am trying to enable the scanning functions on an HP PSC 1350
all-in-one printer.

The print functions work with hpijs/cups/foomatic-filters.

I have installed hpoj, but ptal-init cannot find the scanner.

The problem seems to be that the scan functions get improperly
attached at boot time.

This is my system (uname -a output)

FreeBSD goodwill.io.com 5.4-STABLE FreeBSD 5.4-STABLE #5:\
  Mon Apr 25 09:39:03 CDT 2005\
      toor@goodwill.io.com:/usr/obj/usr/src/sys/GENERIC  i386

The kernel is generic with USB 2.0 enabled


These appear to be the relevant parts of dmesg

usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered


ulpt0: hp psc 1300 series, rev 2.00/1.00, addr 2, iclass 255/204
ulpt0: using bi-directional mode

### printer function found

umass0: hp psc 1300 series, rev 2.00/1.00, addr 2

### evidently umass identifies the scanner functions as a mass storage
### device  (which is the right answer for the photo card when in the
### camera, but evidently is not correct for the psc.

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <HP  1.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6

### attached as a mass storage device at da0, umass continues to
### get wrong answers for the psc 1350

Any help would be appreciated.


-- 
Lars Eighner
eighner@io.com
http://www.larseighner.com/index.html
8800 N IH35 APT 1191 AUSTIN TX 78753-5266



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050503082805.V20517>