Date: Thu, 27 Sep 2001 08:30:46 +0300 From: Stoian Mishinev <mishinev@digsys.bg> To: ian j hart <ianjhart@ntlworld.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: UDMA ICRC READ ERROR Message-ID: <3BB2B986.4961512E@digsys.bg> References: <3BB102B3.5965C0B4@digsys.bg> <3BB218E2.27E6B2C5@ntlworld.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
About history: This is second hand PC previously worked with windows,
but the hard disk is new according to seller :-).
about dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.2-RELEASE #0: Thu Jun 7 19:49:54 EEST 2001
root@gate.bularmex-ik.bg:/usr/src/sys/compile/BularmexIPX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 136818836 Hz
CPU: Pentium/P54C (136.82-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 28545024 (27876K bytes)
Preloaded elf kernel "kernel" at 0xc0439000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq
11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <ATI model 4c47 graphics accelerator> at 17.0 irq 10
rl0: <RealTek 8139 10/100BaseTX> port 0x6c00-0x6cff mem
0xe1001000-0xe10010ff irq 12 at device 18.0 on pci0
rl0: Ethernet address: 00:c0:26:10:4e:9a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
an0: <Aironet PCI4800> port 0x7400-0x743f,0x7000-0x707f mem
0xe1002000-0xe100207f irq 5 at device 19.0 on pci0
an0: Ethernet address: 00:40:96:34:c9:40
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (000608)
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
ad0: 4112MB <ST34313A> [8912/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
ad0: UDMA ICRC READ ERROR blk# 139295 retrying
ad0: UDMA ICRC READ ERROR blk# 519775 retrying
ad0: UDMA ICRC READ ERROR blk# 519775 retrying
rl0: promiscuous mode enabled
rl0: promiscuous mode disabled
ad0: UDMA ICRC READ ERROR blk# 3473959 retrying
ad0: UDMA ICRC READ ERROR blk# 8321559 retrying
ad0: UDMA ICRC READ ERROR blk# 8321559 retrying
And this is a part of /var/log/messages:
Sep 27 02:03:51 gate /kernel: ad0: 4112MB <ST34313A> [8912/15/63] at
ata0-master UDMA33
Sep 27 02:03:51 gate /kernel: Mounting root from ufs:/dev/ad0s1a
Sep 27 02:03:51 gate /kernel: WARNING: / was not properly dismounted
Sep 27 02:03:51 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 139295
retrying
Sep 27 02:03:51 gate named[125]: starting. named 8.2.3-T6B Mon Nov 20
11:27:49 GMT 2000
Sep 27 02:03:51 gate named[125]: limit files set to fdlimit (1024)
Sep 27 02:03:51 gate named[126]: Ready to answer queries.
Sep 27 02:03:55 gate ntpd[129]: ntpd 4.0.99b Mon Nov 20 11:27:20 GMT
2000 (1)
Sep 27 02:03:55 gate ntpd[129]: using kernel phase-lock loop 2040
Sep 27 02:04:02 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 519775
retrying
Sep 27 02:04:02 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 519775
retrying
Sep 27 02:04:04 gate /kernel: rl0: promiscuous mode enabled
Sep 27 02:04:04 gate arpwatch: fopen(arp.dat): No such file or directory
Sep 27 02:04:04 gate /kernel: rl0: promiscuous mode disabled
Sep 27 02:04:05 gate squid[232]: Starting Squid Cache version
2.3.STABLE4 for i386--freebsd4.2...
Sep 27 02:04:05 gate squid[232]: Process ID 232
Sep 27 02:04:05 gate squid[232]: With 1064 file descriptors available
...............
...............
Sep 27 02:11:47 gate ntpd[129]: kernel pll status change 2041
Sep 27 02:58:54 gate ntpd[129]: time reset -0.244426 s
Sep 27 07:58:59 gate ntpd[129]: time reset -0.149632 s
Sep 27 08:11:54 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 8321559
retrying
Sep 27 08:11:55 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 8321559
retrying
Sep 27 08:25:37 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 3470055
retrying
Sep 27 08:25:38 gate last message repeated 2 times
Sep 27 08:25:38 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 3470055
falling back to PIO mode
ian j hart wrote:
>
> Stoian Mishinev wrote:
> >
> > Hi,
> >
> > Can someone tell me wat this mean:
> >
> > Sep 26 01:11:51 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 135751
> > retrying
> > Sep 26 01:11:52 gate last message repeated 2 times
> > Sep 26 01:11:52 gate /kernel: ad0: UDMA ICRC READ ERROR blk# 135751
> > falling back to PIO mode
> >
> > Thanks!
> >
> > Stoain Mishinev
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-stable" in the body of the message
>
> Post the output from dmesg.
>
> Some history might also be useful. eg recent O/S or hardware
> upgrade.
>
> Did you read any of the threads on this subject? (stable and hardware)
>
> --
> ian j hart
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BB2B986.4961512E>