Skip site navigation (1)Skip section navigation (2) 
Date:      Thu, 23 Feb 2012 05:13:46 +0000 (UTC)
From:      "Jayachandran C." <jchandra@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-user@freebsd.org
Subject:   svn commit: r232020 - user/jchandra/xlp-merge/sys/mips/nlm
Message-ID:  <201202230513.q1N5DkKL084973@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help 
Author: jchandra
Date: Thu Feb 23 05:13:46 2012
New Revision: 232020
URL: http://svn.freebsd.org/changeset/base/232020

Log:
  Fixes to the XLP startup code.
  
  Changes are:
  - Correct the order of calling init functions.
  - Fix up checking excluding reset area.
  - use correct mask for chip workaround

Modified:
  user/jchandra/xlp-merge/sys/mips/nlm/xlp_machdep.c

Modified: user/jchandra/xlp-merge/sys/mips/nlm/xlp_machdep.c
==============================================================================
--- user/jchandra/xlp-merge/sys/mips/nlm/xlp_machdep.c	Thu Feb 23 05:10:00 2012	(r232019)
+++ user/jchandra/xlp-merge/sys/mips/nlm/xlp_machdep.c	Thu Feb 23 05:13:46 2012	(r232020)
@@ -127,7 +127,7 @@ xlp_setup_core(void)
 	 */
 	reg |= (1ull << 31);
 	/* Clear S1RCM  - A0 errata */
-	reg &= ~0xeull;
+	reg &= ~0x1eull;
 	nlm_mtcr(LSU_DEFEATURE, reg);
 
 	reg = nlm_mfcr(SCHED_DEFEATURE);
@@ -358,14 +358,14 @@ mips_init(void)
 	mips_cpu_init();
 	cpuinfo.cache_coherent_dma = TRUE;
 	pmap_bootstrap();
+	mips_proc0_init();
+	mutex_init();
 #ifdef DDB
 	kdb_init();
 	if (boothowto & RB_KDB) {
 		kdb_enter("Boot flags requested debugger", NULL);
 	}
 #endif
-	mips_proc0_init();
-	mutex_init();
 }
 
 unsigned int
@@ -433,8 +433,12 @@ xlp_mem_init(void)
 
 		/* first bar, start a bit after end */
 		if (base == 0) {
-			base = (vm_paddr_t)MIPS_KSEG0_TO_PHYS(&_end) + 0x20000;
-			lim  = 0x0c000000;  /* TODO : hack to avoid uboot packet mem */
+			base = (vm_paddr_t)MIPS_KSEG0_TO_PHYS(&_end);
+			base = round_page(base) + 0x20000; /* round up */
+			/* TODO : hack to avoid uboot packet mem, network
+			 * interface will write here if not reset correctly
+			 * by u-boot */
+			lim  = 0x0c000000;
 		}
 		if (base >= XLP_MEM_LIM) {
 			printf("Mem [%d]: Ignore %#jx - %#jx\n", i,
@@ -456,7 +460,7 @@ xlp_mem_init(void)
 		 * Exclude reset entry memory range 0x1fc00000 - 0x20000000
 		 * from free memory
 		 */
-		if (base <= 0x1fc00000 && (base + lim) > 0x1fc00000) {
+		if (base < 0x20000000 && lim > 0x1fc00000) {
 			uint64_t base0, lim0, base1, lim1;
 
 			base0 = base;
@@ -542,6 +546,9 @@ platform_start(__register_t a0 __unused,
 	/* setup for the startup core */
 	xlp_setup_mmu();
 
+	/* Read/Guess/setup board information */
+	nlm_board_info_setup();
+
 	/* MIPS generic init */
 	mips_init();
 
@@ -549,7 +556,6 @@ platform_start(__register_t a0 __unused,
 	 * XLP specific post initialization
  	 * initialize other on chip stuff
 	 */
-	nlm_board_info_setup();
 	xlp_pic_init();
 
 	mips_timer_init_params(xlp_cpu_frequency, 0);

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202230513.q1N5DkKL084973>