Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 15 Oct 1995 09:47:30 +1100 (DST)
From:      Carey Nairn <>
To:        FreeBSD Questions <>
Subject:   SB16 and 2.0.5-RELEASE
Message-ID:  <>

Next in thread | Raw E-Mail | Index | Archive | Help

ever since I changed to 2.0.5 I haven't been able to use my SB16 for 
playing .au files etc.  It worked under 2.0 OK but the sb drivers changed 
with 2.0.5 (as far as I can tell since the devices in the kernel config 
changed).  I have configured my kernel as specified in the LINT file but 
sound doesn't work.  The sound card seems to be probed OK at bootup so I 
don't know where to go from here.  I haven't needed sound to work until 
now so it has had a low priority... 

Output from dmesg and my kernel config file follow:

FreeBSD 2.0.5-RELEASE #0: Sat Sep 30 15:30:38  1995
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping=5
real memory  = 16384000 (4000 pages)
avail memory = 14921728 (3643 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 10 on isa
ed0: address 00:c0:58:20:b0:45, type NE2000 (16 bit) 
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x278-0x27f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC2540H>
wd0: 515MB (1056384 sectors), 1048 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC2420H>
wd2: 405MB (830760 sectors), 989 cyls, 15 heads, 56 S/T, 512 B/S
wt0: disabled, not probed.
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster Pro 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvi0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
sbmidi: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
bpf: sl0 attached
bpf: sl1 attached
bpf: tun0 attached


# BHELLIOM -- Generic machine with WD/AHx/NCR/BTx family disks
#       $Id: BHELLIOM,v 1.36 1995/03/26 12:15:00 cpn Exp $

machine         "i386"
#cpu            "I386_CPU"
cpu             "I486_CPU"
cpu             "I586_CPU"
ident           GENERIC
maxusers        10

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         NFS                     #Network Filesystem
options         MSDOSFS                 #MSDOS Filesystem
options         "CD9660"                #ISO 9660 Filesystem
options         PROCFS                  #Process filesystem
options         "COMPAT_43"             #Compatible with BSD 4.3
options         GATEWAY                 #internetwork gateway
options         "SCSI_DELAY=15"         #Be pessimistic about Joe SCSI device
options         BOUNCE_BUFFERS          #include support for DMA bounce 
options         UCONSOLE                #Allow users to grab the console

config          kernel  root on wd0 swap on wd0 and wd1 and vn0 dumps on wd0

controller      isa0
#controller     pci0

controller      fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk            fd0     at fdc0 drive 0
disk            fd1     at fdc0 drive 1
tape            ft0     at fdc0 drive 2

controller      wdc0    at isa? port "IO_WD1" bio irq 14 vector wdintr
disk            wd0     at wdc0 drive 0
disk            wd1     at wdc0 drive 1

controller      wdc1    at isa? port "IO_WD2" bio irq 15 vector wdintr
disk            wd2     at wdc1 drive 0
disk            wd3     at wdc1 drive 1

controller      scbus0

#device         sd0

#device         st0

device          cd0     #Only need one of these, the code dynamically grows

device          wt0     at isa? port 0x300 bio irq 5 drq 1 vector wtintr

options         XSERVER                 # include code for XFree86

device          npx0    at isa? port "IO_NPX" irq 13 vector npxintr

device          sio0    at isa? port "IO_COM1" tty irq 4 vector siointr
device          sio1    at isa? port "IO_COM2" tty irq 3 vector siointr
device          sio2    at isa? port "IO_COM3" tty irq 5 vector siointr
device          sio3    at isa? port "IO_COM4" tty irq 9 vector siointr

device          lpt0    at isa? port? tty irq 7 vector lptintr
device          lpt1    at isa? port? tty
device          lpt2    at isa? port? tty

#device de0
device ed0 at isa? port 0x280 net irq  10 iomem 0xd8000 vector edintr

# Sound Card Configuration
controller      snd0
device sb0      at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbxvi0   at isa? drq 5
device sbmidi0  at isa? port 0x330
device opl0     at isa? port 0x388

pseudo-device   loop
pseudo-device   ether
pseudo-device   log
pseudo-device   sl      2
pseudo-device   ppp     2
pseudo-device   pty     16
pseudo-device   speaker
pseudo-device   gzip            # Exec gzipped a.out's
pseudo-device   vn
pseudo-device   snp     3
pseudo-device   tun     1
pseudo-device   bpfilter 4

Carey Nairn                     ! email :
Networks and Communications     ! phone : (002) 20 7419
Information Technology Services ! fax   : (002) 20 7898
University of Tasmania.         !

Want to link to this message? Use this URL: <>