From owner-freebsd-questions Tue Aug 1 5:12: 9 2000 Delivered-To: freebsd-questions@freebsd.org Received: from mail13.bigmailbox.com (mail13.bigmailbox.com [209.132.220.44]) by hub.freebsd.org (Postfix) with ESMTP id 7F4E637B5AF for ; Tue, 1 Aug 2000 05:11:55 -0700 (PDT) (envelope-from feve@kent.nu) Received: œby mail13.bigmailbox.com (8.8.7/8.8.7) id FAA05811; Tue, 1 Aug 2000 05:14:43 -0700 Date: Tue, 1 Aug 2000 05:14:43 -0700 Message-Id: <200008011214.FAA05811@mail13.bigmailbox.com> Content-Type: text/plain Content-Disposition: inline Content-Transfer-Encoding: binary X-Mailer: MIME-tools 4.104 (Entity 4.116) Mime-Version: 1.0 X-Originating-Ip: [164.10.32.33] From: "Fredrik Petterson" To: freebsd-questions@freebsd.org Subject: Xircom CE3B-100 problem Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm using a Compaq Armada E500 with a Xircom Creditcard Ethernet 10/100 card and i get the following when i boot my computer: pccard: card inserted, slot 1 xe1: xe: Probing xe1: Can't map in cis and then pccard says: pccardd[52]: driver allocation failed for Xircom(CreditCard 10/100): Device not configured pccardd[52]: pccardd started Anyone knows what's wrong? Thanx! /Feve/ Here are my config's uname: FreeBSD chakotay 4.0-RELEASE FreeBSD 4.0-RELEASE #0: Tue Aug 1 13:59:58 CEST 2000 root@chakotay:/usr/src/sys/compile/TREK-II i386 dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #0: Tue Aug 1 13:59:58 CEST 2000 root@chakotay:/usr/src/sys/compile/TREK-II Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66d Stepping = 13 Features=0x183f9ff real memory = 201261056 (196544K bytes) avail memory = 192053248 (187552K bytes) Preloaded elf kernel "kernel" at 0xc02f0000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 pcic-pci0: mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0 pcic-pci1: mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x2420-0x242f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 pci0: at 7.2 irq 11 chip1: port 0x4000-0x400f at device 7.3 on pci0 chip2: port 0x2000-0x20ff irq 11 at device 8.0 on pci0 pci0: (vendor=0x11c1, dev=0x0449) at 9.0 irq 11 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ad0: 5729MB [12416/15/63] at ata0-master using UDMA33 acd0: CDROM at ata0-slave using PIO4 Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 1 xe1: xe: Probing xe1: Can't map in cis dumpcis: Code 136 not found Code 136 not found code Unknown ignored code Manufacturer ID ignored Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 44 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31 020: 30 2f 31 30 30 00 31 2e 30 30 00 ff Version = 5.0, Manuf = [Xircom],card vers = [CreditCard 10/100] Addit. info = [CE3-10/100],[1.00] Tuple #4, code = 0x0 (Null tuple), length = 8 000: 8e 63 27 00 00 00 00 00 Tuple #5, code = 0x0 (Null tuple), length = 5 000: 05 01 0a 01 43 Tuple #6, code = 0x44 (Card init date), length = 4 000: b8 73 94 27 Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 01 00 08 03 Reg len = 2, config register addr = 0x800, last config = 0x1 Registers: XX------ Tuple #8, code = 0x1b (Configuration entry), length = 25 000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60 010: 00 00 0f 70 bc 8e 10 00 20 Config index = 0x1(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 3.5 x 100mA Max current average over 1 second: 4 x 100mA Max current average over 10 ms: 4 x 100mA Power down supply current: 1 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 23 address lines IRQ modes: IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12 Memory space length = 0x60 Max twin cards = 0 Misc attr: Tuple #9, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 80 c7 8e 63 27 Voice services available: Tuple #11, code = 0x22 (Functional EXT), length = 2 000: 01 02 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 5 000: 02 80 96 98 00 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 5 000: 02 00 e1 f5 05 Data modem services available: Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 03 01 Tuple #15, code = 0x22 (Functional EXT), length = 2 000: 03 03 Tuple #16, code = 0x22 (Functional EXT), length = 2 000: 05 00 Modem interface capabilities: Tuple #17, code = 0xff (Terminator), length = 0 2 slots found pccard.conf: # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) # irq 3 5 10 11 13 15 irq 3 10 11 13 15 # Available memory slots memory 0xd4000 96k # Xircom CreditCard Ethernet 10/100 card "Xircom" "CreditCard 10/100" config 0x1 "xe0" ? insert logger -t pccard:$device -s Xircom CreditCard Ethernet inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s Xircom CreditCard Ethernet removed remove /etc/pccard_ether $device delete pccard part of /etc/default/rc.conf pccard_enable="YES" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="1" # pccard beep type. pccard_ifconfig="DHCP" # Specialized pccard ethernet configuration (or NO). pccardd_flags="" # Additional flags for pccardd. pccard_conf="/etc/pccard.conf" # pccardd(8) config file and my kernel config: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident TREK-II maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet ------------------------------------------------------------ Kent Mail rockar! http://www.kent.nu/ Fixa gratis Kent Mail du också! -> http://www.kent.nu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message