Date: Wed, 26 Dec 2001 09:53:39 -0800 From: "Peter/Los Angeles, CA" <peter@haloflightleader.net> To: "Tom" <tom@uniserve.com>, "Keith J" <kjohnso8@columbus.rr.com> Cc: "Robert Watson" <rwatson@FreeBSD.ORG>, "Nevermind" <never@nevermind.kiev.ua>, "Murray Stokely" <murray@FreeBSD.ORG>, <stable@FreeBSD.ORG>, <freebsd-qa@FreeBSD.ORG>, <bmah@FreeBSD.ORG> Subject: Re: 4.5 PRERELEASE - Call for testing Message-ID: <007201c18e36$45a05c40$245b1486@hhlaw.com> References: <Pine.BSF.4.10.10112251046120.81618-100000@athena.uniserve.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
I've actually solved the problem. It was due to the client being full, and no space to write cache/swap. But I've since fixed that, and there was no problem on the backend to begin with. Peter ----- Original Message ----- From: "Tom" <tom@uniserve.com> To: "Keith J" <kjohnso8@columbus.rr.com> Cc: "Peter Ong" <peter@haloflightleader.net>; "Robert Watson" <rwatson@FreeBSD.ORG>; "Nevermind" <never@nevermind.kiev.ua>; "Murray Stokely" <murray@FreeBSD.ORG>; <stable@FreeBSD.ORG>; <freebsd-qa@FreeBSD.ORG>; <bmah@FreeBSD.ORG> Sent: Tuesday, December 25, 2001 10:50 AM Subject: Re: 4.5 PRERELEASE - Call for testing > > On Tue, 25 Dec 2001, Keith J wrote: > > ... > > Another possibility is you do not have a Samba problem, but a network > > problem with auto-negotiate. Some older 10/100 cards and switch combinations > > step all over each other. You should lock down one end to a specific speed > ... > > That is bad advice. Auto-negotiation is not auto-detect. If you > disable auto-negotiate at one end and specify manual settings, you must > disable it on the other end too, and specify the SAME manual settings. > Either use auto-negotiate everywhere, or use manual everywhere. I would > recommend using auto everywhere. > > Tom > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007201c18e36$45a05c40$245b1486>