Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 Jul 2001 18:55:58 +0100
From:      "Stewart Morgan" <stewart@nameless-uk.com>
To:        <freebsd-stable@FreeBSD.org>
Cc:        "'Greg Lehey'" <grog@lemis.com>
Subject:   PANIC in FFS -- Please HELP!
Message-ID:  <000001c10fb2$ed07a0e0$0f01000a@saturn>
In-Reply-To: <20010710065655.Y80862@wantadilla.lemis.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
This is a multi-part message in MIME format.

------=_NextPart_000_0001_01C10FBB.4ECD8F80
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit


Hi,
	I have a system that will reproducibly panic with the entries
below in my make.conf.  I thought the problem was vinum related, but
having purchased a h/ware raid solution and with Greg's help in tracking
things down, I'm not so sure.

	Please find attached the trace from a debug kernel with these
optimisations enabled, the kernel config (LAXMI{.DAT}) and a dmesg
output.

	Any help appreciated!

Stewart.


---------------

CPUTYPE=i686

CFLAGS=-O -pipe -felide-constructors -mcpu=pentiumpro -march=pentiumpro
-ffast-math -felide-constructors -fexpensive-optimizations
-funroll-loops -funroll-all-loops -fmemoize-lookups -fsave-memoized
-fno-strength-reduce

CXXFLAGS+=-O -pipe -felide-constructors -mcpu=pentiumpro
-march=pentiumpro -ffast-math -felide-constructors
-fexpensive-optimizations -funroll-loops -funroll-all-loops
-fmemoize-lookups -fsave-memoized -fno-strength-reduce

COPTFLAGS=-O -pipe -felide-constructors -mcpu=pentiumpro
-march=pentiumpro -ffast-math -felide-constructors
-fexpensive-optimizations -funroll-loops -funroll-all-loops
-fmemoize-lookups -fsave-memoized -fno-strength-reduce


------=_NextPart_000_0001_01C10FBB.4ECD8F80
Content-Type: text/plain;
	name="trace.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="trace.txt"

GNU gdb 4.18
Copyright 1998 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you =
are
welcome to change it and/or distribute copies of it under certain =
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for =
details.
This GDB was configured as "i386-unknown-freebsd"...
IdlePTD 4558848
initial pcb at 3acf60
panicstr: from debugger
panic messages:
---
Fatal trap 12: page fault while in kernel mode
fault virtual address	=3D 0x4a
fault code		=3D supervisor read, page not present
instruction pointer	=3D 0x8:0xc02a22a3
stack pointer	        =3D 0x10:0xca1ebd14
frame pointer	        =3D 0x10:0xca1ebd34
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0
current process		=3D 359 (pax)
interrupt mask		=3D none
panic: from debugger
panic: from debugger
Uptime: 6m37s

dumping to dev #da/0x20001, offset 1310976
dump 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 =
110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 =
90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 =
66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 =
42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 =
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0=20
---
#0  dumpsys () at ../../kern/kern_shutdown.c:472
472		if (dumping++) {
(kgdb) bt
#0  dumpsys () at ../../kern/kern_shutdown.c:472
#1  0xc019ba52 in boot (howto=3D0x104) at ../../kern/kern_shutdown.c:312
#2  0xc019bf89 in panic (fmt=3D0xc033f2f4 "from debugger") at =
../../kern/kern_shutdown.c:559
#3  0xc0155e55 in db_panic (addr=3D0xc02a22a3, have_addr=3D0x0, =
count=3D0xffffffff, modif=3D0xca1ebb84 "")
    at ../../ddb/db_command.c:433
#4  0xc0155df6 in db_command (last_cmdp=3D0xc0383478, =
cmd_table=3D0xc03832d8, aux_cmd_tablep=3D0xc03a6244)
    at ../../ddb/db_command.c:333
#5  0xc0155eba in db_command_loop () at ../../ddb/db_command.c:455
#6  0xc0158eff in db_trap (type=3D0xc, code=3D0x0) at =
../../ddb/db_trap.c:71
#7  0xc0308800 in kdb_trap (type=3D0xc, code=3D0x0, regs=3D0xca1ebcd4) =
at ../../i386/i386/db_interface.c:158
#8  0xc0318504 in trap_fatal (frame=3D0xca1ebcd4, eva=3D0x4a) at =
../../i386/i386/trap.c:946
#9  0xc03181c5 in trap_pfault (frame=3D0xca1ebcd4, usermode=3D0x0, =
eva=3D0x4a) at ../../i386/i386/trap.c:844
#10 0xc0317d2b in trap (frame=3D{tf_fs =3D 0x10, tf_es =3D 0xca1e0010, =
tf_ds =3D 0x10, tf_edi =3D 0x19, tf_esi =3D 0xf65,=20
      tf_ebp =3D 0xca1ebd34, tf_isp =3D 0xca1ebd00, tf_ebx =3D =
0xc14ec000, tf_edx =3D 0x1a, tf_ecx =3D 0x1e, tf_eax =3D 0x1d0,=20
      tf_trapno =3D 0xc, tf_err =3D 0x0, tf_eip =3D 0xc02a22a3, tf_cs =
=3D 0x8, tf_eflags =3D 0x10207, tf_esp =3D 0x0, tf_ss =3D 0x0})
    at ../../i386/i386/trap.c:443
#11 0xc02a22a3 in ffs_blkpref (ip=3D0xc19d7800, lbn=3D0x100c, =
indx=3D0x0, bap=3D0x0) at ../../ufs/ffs/ffs_alloc.c:709
#12 0xc02a549a in ffs_balloc (ap=3D0xca1ebe70) at =
../../ufs/ffs/ffs_balloc.c:250
#13 0xc02b0e3a in ffs_write (ap=3D0xca1ebea8) at vnode_if.h:1056
#14 0xc01dfc12 in vn_write (fp=3D0xc1a50ac0, uio=3D0xca1ebef0, =
cred=3D0xc19d3100, flags=3D0x0, p=3D0xc8854860) at vnode_if.h:363
#15 0xc01af3bc in dofilewrite (p=3D0xc8854860, fp=3D0xc1a50ac0, =
fd=3D0x6, buf=3D0x809dfc0, nbyte=3D0x2000,=20
    offset=3D0xffffffffffffffff, flags=3D0x0) at ../../sys/file.h:162
#16 0xc01af2ab in write (p=3D0xc8854860, uap=3D0xca1ebf80) at =
../../kern/sys_generic.c:329
#17 0xc0318736 in syscall2 (frame=3D{tf_fs =3D 0x809002f, tf_es =3D =
0x2f, tf_ds =3D 0xbfbf002f, tf_edi =3D 0x809dfc0,=20
      tf_esi =3D 0x2000, tf_ebp =3D 0xbfbfd60c, tf_isp =3D 0xca1ebfd4, =
tf_ebx =3D 0x809dfc0, tf_edx =3D 0xbfbfd668,=20
      tf_ecx =3D 0x2, tf_eax =3D 0x4, tf_trapno =3D 0x7, tf_err =3D 0x2, =
tf_eip =3D 0x808c8f0, tf_cs =3D 0x1f, tf_eflags =3D 0x297,=20
      tf_esp =3D 0xbfbfd5e0, tf_ss =3D 0x2f}) at =
../../i386/i386/trap.c:1150
#18 0xc0309285 in Xint0x80_syscall ()
#19 0x804c0b3 in ?? ()
#20 0x804abc9 in ?? ()
#21 0x8052d65 in ?? ()
#22 0x80481e2 in ?? ()
(kgdb)=20

------=_NextPart_000_0001_01C10FBB.4ECD8F80
Content-Type: application/octet-stream;
	name="LAXMI.DMESG"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="LAXMI.DMESG"

Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
	The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.3-STABLE #9: Fri Jun 15 11:30:25 GMT 2001=0A=
    root@laxmi.bristol.squidge.com:/usr/src/sys/compile/LAXMI=0A=
Timecounter "i8254"  frequency 1193077 Hz=0A=
CPU: Pentium II/Pentium II Xeon/Celeron (400.87-MHz 686-class CPU)=0A=
  Origin =3D "GenuineIntel"  Id =3D 0x665  Stepping =3D 5=0A=
  =
Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR>=0A=
real memory  =3D 134086656 (130944K bytes)=0A=
sio0: gdb debugging port=0A=
avail memory =3D 125460480 (122520K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0431000.=0A=
ccd0-3: Concatenated disk drivers=0A=
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc03bcda2 (1000022)=0A=
VESA: Cirrus Logic GD-546X VGA=0A=
Pentium Pro MTRR support enabled=0A=
apm0: <APM BIOS> on motherboard=0A=
apm: found APM BIOS v1.2, connected at v1.2=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0=0A=
pci1: <PCI bus> on pcib1=0A=
pci1: <Cirrus Logic GD5465 SVGA controller> at 0.0 irq 10=0A=
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 =
on pci0=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0=0A=
uhci0: Invalid irq 255=0A=
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS=0A=
device_probe_and_attach: uhci0 attach returned 6=0A=
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq =
9 at device 7.3 on pci0=0A=
intpm0: I/O mapped 440=0A=
intpm0: intr IRQ 9 enabled revision 0=0A=
smbus0: <System Management Bus> on intsmb0=0A=
smb0: <SMBus general purpose I/O> on smbus0=0A=
intpm0: PM I/O mapped 400 =0A=
pcib2: <DEC 21152 PCI-PCI bridge> at device 16.0 on pci0=0A=
pci2: <PCI bus> on pcib2=0A=
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem =
0xfe900000-0xfe9fffff,0xfeaff000-0xfeafffff irq 11 at device 5.0 on pci2=0A=
fxp0: Ethernet address 00:02:b3:2a:1d:82=0A=
inphy0: <i82555 10/100 media interface> on miibus0=0A=
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdf80-0xdf9f mem =
0xfe700000-0xfe7fffff,0xff1ff000-0xff1fffff irq 9 at device 6.0 on pci2=0A=
fxp1: Ethernet address 00:90:27:34:25:b1=0A=
inphy1: <i82555 10/100 media interface> on miibus1=0A=
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xe400-0xe4ff mem =
0xfebfe000-0xfebfefff irq 10 at device 18.0 on pci0=0A=
aic7895C: Wide Channel A, SCSI Id=3D7, 32/255 SCBs=0A=
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xe800-0xe8ff mem =
0xfebff000-0xfebfffff irq 10 at device 18.1 on pci0=0A=
aic7895C: Wide Channel B, SCSI Id=3D7, 32/255 SCBs=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x80 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x280>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x91 on isa0=0A=
sio0: type 16550A=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
IPv6 packet filtering initialized, default to accept, logging limited to =
100 packets/entry=0A=
IP packet filtering initialized, divert enabled, rule-based forwarding =
enabled, default to accept, logging limited to 100 packets/entry by =
default=0A=
IPsec: Initialized Security Association Processing.=0A=
IP Filter: v3.4.16 initialized.  Default =3D pass all, Logging =3D =
enabled=0A=
ad0: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata0-master tagged UDMA33=0A=
ad2: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata1-master tagged UDMA33=0A=
ad3: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata1-slave tagged UDMA33=0A=
Waiting 8 seconds for SCSI devices to settle=0A=
sa0 at ahc0 bus 0 target 4 lun 0=0A=
sa0: <ARCHIVE Python 27871-XXX 1214> Removable Sequential Access SCSI-2 =
device =0A=
sa0: 5.000MB/s transfers (5.000MHz, offset 8)=0A=
da0 at ahc0 bus 0 target 0 lun 0=0A=
da0: <SEAGATE ST39102LW 0005> Fixed Direct Access SCSI-2 device =0A=
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing =
Enabled=0A=
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)=0A=
Mounting root from ufs:/dev/da0s1a=0A=

------=_NextPart_000_0001_01C10FBB.4ECD8F80
Content-Type: application/octet-stream;
	name="LAXMI.DAT"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="LAXMI.DAT"

#########################################################################=
##############=0A=
#########################################################################=
##############=0A=
## Configuration file for Apollo=0A=
#########################################################################=
##############=0A=
#########################################################################=
##############=0A=
ident		LAXMI=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Generic options=0A=
#########################################################################=
##############=0A=
#=0A=
options		CLK_USE_I8254_CALIBRATION=0A=
options		CLK_USE_TSC_CALIBRATION=0A=
options		INCLUDE_CONFIG_FILE=0A=
machine		i386=0A=
maxusers	128=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Single CPU options=0A=
#########################################################################=
##############=0A=
#=0A=
cpu		I686_CPU=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# SMP options...=0A=
#########################################################################=
##############=0A=
#=0A=
# To make an SMP kernel, the next two are needed=0A=
#options	SMP			# Symmetric MultiProcessor Kernel=0A=
#options	APIC_IO			# Symmetric (APIC) I/O=0A=
# Optionally these may need tweaked, (defaults shown):=0A=
#options	NCPU=3D2			# number of CPUs=0A=
#options	NBUS=3D4			# number of busses=0A=
#options	NAPIC=3D1			# number of IO APICs=0A=
#options	NINTR=3D24		# number of INTs=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# File system support...=0A=
#########################################################################=
##############=0A=
#=0A=
options		FFS			#Berkeley Fast Filesystem=0A=
options		FFS_ROOT		#FFS usable as root device [keep this!]=0A=
options		CD9660=0A=
options		MSDOSFS=0A=
options		PROCFS=0A=
options		NFS			#Network Filesystem=0A=
options		SOFTUPDATES=0A=
#options		PQ_CACHESIZE=3D1024	# Cache colouring=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Kernel config options=0A=
#########################################################################=
##############=0A=
#=0A=
options		USERCONFIG		#boot -c editor=0A=
options		VISUAL_USERCONFIG	#visual boot -c editor=0A=
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]=0A=
options         COMPAT_LINUX=0A=
options 	P1003_1B		#Posix P1003_1B real-time extensions=0A=
options 	_KPOSIX_PRIORITY_SCHEDULING=0A=
options 	_KPOSIX_VERSION=3D199309L=0A=
config		kernel=0A=
=0A=
#########################################################################=
##############=0A=
# Debugging options=0A=
#########################################################################=
##############=0A=
#=0A=
makeoptions	DEBUG=3D-g=0A=
options		DDB=0A=
#options		DDB_UNATTENDED=0A=
=0A=
#########################################################################=
##############=0A=
# Buses...=0A=
#########################################################################=
##############=0A=
#=0A=
options		AUTO_EOI_1=0A=
# EOI_2 KILLS MACHINE!=0A=
device		isa=0A=
device		pci=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Floppy drive...=0A=
#########################################################################=
##############=0A=
#=0A=
device		fdc0	at isa? port IO_FD1 irq 6 drq 2=0A=
device		fd0	at fdc0 drive 0=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# IDE stuff...=0A=
#########################################################################=
##############=0A=
#=0A=
options		ATA_STATIC_ID=0A=
device		ata0	at isa? port IO_WD1 irq 14=0A=
device		ata1	at isa? port IO_WD2 irq 15=0A=
device		ata=0A=
device		atadisk			# ATA disk drives=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# SCSI stuff...=0A=
#########################################################################=
##############=0A=
#=0A=
options		SCSI_DELAY=3D8000		#Be pessimistic about Joe SCSI device=0A=
options		AHC_ALLOW_MEMIO=0A=
device		ahc=0A=
device		scbus=0A=
device		da=0A=
device		sa=0A=
device		cd=0A=
device		pass=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Console etc...=0A=
#########################################################################=
##############=0A=
#=0A=
makeoptions	ATKBD_DFLT_KEYMAP=3Duk.iso.kbd=0A=
options		UCONSOLE=0A=
options		ATKBD_DFLT_KEYMAP=0A=
options 	SC_NORM_ATTR=3D"(FG_YELLOW|BG_BLACK)"=0A=
options 	SC_NORM_REV_ATTR=3D"(FG_BLACK|BG_LIGHTGREY)"=0A=
options		SC_KERNEL_CONS_ATTR=3D"(FG_LIGHTRED|BG_BLACK)"=0A=
options		SC_KERNEL_CONS_REV_ATTR=3D"(FG_BLACK|BG_RED)"=0A=
options		SC_NO_CUTPASTE=0A=
options		SC_NO_SYSMOUSE=0A=
options		SC_HISTORY_SIZE=3D4096=0A=
#options	SC_PIXEL_MODE=0A=
options		VESA=0A=
options		XSERVER			# support for X server=0A=
options		MSGBUF_SIZE=3D40960=0A=
=0A=
device		atkbdc0	at isa? port IO_KBD=0A=
device		atkbd0	at atkbdc? irq 1=0A=
device		psm0	at atkbdc? irq 12=0A=
device		vga0	at isa? port?=0A=
device		vga1	at isa? port?=0A=
device		sc0	at isa? flags 0x80=0A=
device		npx0	at nexus? port IO_NPX flags 0x0 irq 13=0A=
pseudo-device	splash=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Power and system management...=0A=
#########################################################################=
##############=0A=
#=0A=
device		apm0    at nexus?=0A=
device		smb=0A=
device		smbus=0A=
device		iicbus=0A=
device		intpm=0A=
device		iicsmb=0A=
device		ichsmb=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Serial ports for serial consoles...=0A=
#########################################################################=
##############=0A=
#=0A=
options		CONSPEED=3D9600=0A=
device		sio0	at isa? port "IO_COM1" flags 0x91 irq 4=0A=
device		sio1	at isa? port "IO_COM2" irq 3=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Paralell ports...=0A=
#########################################################################=
##############=0A=
#=0A=
device		ppc0	at isa? port? irq 7=0A=
device		ppbus=0A=
device		lpt=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# USB devices...=0A=
#########################################################################=
##############=0A=
#=0A=
device		uhci=0A=
device		usb=0A=
device		uhid=0A=
device		ums=0A=
device		umass=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Network card...=0A=
#########################################################################=
##############=0A=
#=0A=
device		miibus=0A=
device          fxp=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Firewall stuff...=0A=
#########################################################################=
##############=0A=
#=0A=
# IP Security and tweaks=0A=
options		IPSEC=0A=
options		IPSEC_ESP=0A=
options		PPP_BSDCOMP=0A=
options		PPP_DEFLATE=0A=
options 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN=0A=
options		ICMP_BANDLIM=0A=
=0A=
# IPv4=0A=
options		INET			#InterNETworking=0A=
options		IPFIREWALL              #firewall=0A=
options		IPFIREWALL_VERBOSE      #print information about dropped packets=0A=
options		IPFIREWALL_FORWARD      #enable transparent proxy support=0A=
options		IPFIREWALL_VERBOSE_LIMIT=3D100 #limit verbosity=0A=
options		IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default=0A=
=0A=
# IPv6=0A=
options		INET6			#InterNETworking=0A=
options		IPV6FIREWALL              #firewall=0A=
options		IPV6FIREWALL_VERBOSE      #print information about dropped =
packets=0A=
options		IPV6FIREWALL_VERBOSE_LIMIT=3D100 #limit verbosity=0A=
options		IPV6FIREWALL_DEFAULT_TO_ACCEPT #allow everything by default=0A=
=0A=
# Misc=0A=
options		IPDIVERT                #divert sockets=0A=
options		IPFILTER                #kernel ipfilter support=0A=
options		IPFILTER_LOG            #ipfilter logging=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Pseudo devices...=0A=
#########################################################################=
##############=0A=
#=0A=
pseudo-device	loop=0A=
pseudo-device	ether=0A=
pseudo-device	gzip=0A=
pseudo-device	bpf		4=0A=
pseudo-device	vn		4=0A=
pseudo-device	ccd		4=0A=
pseudo-device	ppp		1=0A=
pseudo-device	tun		1=0A=
pseudo-device	pty		64=0A=
pseudo-device	gif		4=0A=
pseudo-device	faith		1=0A=
pseudo-device	stf		1=0A=
pseudo-device	snp		2=0A=
=0A=
=0A=
#########################################################################=
##############=0A=
# Shared system resources...=0A=
#########################################################################=
##############=0A=
#=0A=
options		SYSVSHM=0A=
options		SYSVMSG=0A=
options		SYSVSEM=0A=

------=_NextPart_000_0001_01C10FBB.4ECD8F80--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001c10fb2$ed07a0e0$0f01000a>