Date: Mon, 24 Sep 2012 22:28:01 +0200 From: Giovanni Trematerra <gianni@freebsd.org> To: Tim Kientzle <tim@kientzle.com> Cc: arm@freebsd.org Subject: Re: Towards an ARM system-building script Message-ID: <CACfq092SemEA=m4KDVCLZFH2Bu%2BE28h5FLW9CmGjPf3DQJuvPQ@mail.gmail.com> In-Reply-To: <5679C679-A434-4714-BE61-4DC093DA7F34@kientzle.com> References: <DD05E72B9F474BFE96B6A4B050D2A18A@gmail.com> <0DCAC001-FF06-431A-A486-2B50BE913B0D@bsdimp.com> <FAA208C1-2872-4BB6-A7EC-04C757533CA4@kientzle.com> <7E18623F-3945-4EA0-B332-5A5C717B20F0@kientzle.com> <9896AA3E-D8A0-4CE8-8160-4672AA07388F@cheney.net> <6B74ADD7-3266-4919-BEB4-B10E0C1BAB58@kientzle.com> <5679C679-A434-4714-BE61-4DC093DA7F34@kientzle.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Sep 23, 2012 at 8:55 PM, Tim Kientzle <tim@kientzle.com> wrote: > On Sep 4, 2012, at 9:52 PM, Tim Kientzle wrote: >> On Sep 4, 2012, at 9:33 PM, Dave Cheney wrote: >> >>> Sorry to butt in on this discussion, but how feasible would it be to adapt this build script to the pandaboard. I understand there may be a config in svn similar to the beaglebone which may be applicable. >> >> I've started tinkering with ideas for generalizing my >> BeagleBone script so it can build system images for >> other boards. > > I've made significant progress and would > appreciate any feedback: > > github.com/kientzle/freebsd-beaglebone > > This has been massively refactored so it can > build system images for a variety of > ARM-based boards. Right now: > > * BeagleBone builds and boots cleanly again. ;-) > In particular, I've caught up with some changes to > ubldr in -CURRENT and switched to using the > stable DENX U-Boot sources instead of the > rapidly-evolving (and often broken) TI/Arago sources. > > * PandaBoard: I have a completely untested > sketch. Someone with a PandaBoard will need > to work through the U-Boot configuration to make > this work. I just bought a PandaBoard. I'll try to have a bootable image with your script. Thank you -- Gianni
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACfq092SemEA=m4KDVCLZFH2Bu%2BE28h5FLW9CmGjPf3DQJuvPQ>