Date: Mon, 26 Apr 2004 21:30:50 +0200 From: EuropeanServers - Christophe BAEGERT <c.baegert@europeanservers.net> To: freebsd-questions@freebsd.org Subject: Re: How to mount a Firewire disk ? Message-ID: <20040426193050.GA31508@gorgonzola.europeanservers.net> In-Reply-To: <20040425173853.GA23793@gorgonzola.europeanservers.net> References: <20040425173853.GA23793@gorgonzola.europeanservers.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Nobody never tried to mount a firewire hd ? Le lun avr 26 21:24:47 CEST 2004, EuropeanServers - Christophe BAEGERT a écrit: > Hello, > > I'm new to FreeBSD. > > I set up a FreeBSD-4.9 backup server on a Epia mainboard with 4 HD of 120 gigs, and want to add an external backup > of 120Gb. Of course, I need firewire to have acceptable speeds. The VT6303 chipset is detected, but I don't see da0. > > This is what I see in the logs : > > Apr 22 13:22:46 gattaca /kernel: fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xe6400000-0xe64007ff irq 10 at device 13.0 on pci0 > Apr 22 13:22:46 gattaca /kernel: fwohci0: OHCI version 1.0 (ROM=1) > Apr 22 13:22:46 gattaca /kernel: fwohci0: No. of Isochronous channel is 4. > Apr 22 13:22:46 gattaca /kernel: fwohci0: EUI64 00:40:63:50:00:00:82:f1 > Apr 22 13:22:46 gattaca /kernel: fwohci0: Phy 1394a available S400, 2 ports. > Apr 22 13:22:46 gattaca /kernel: fwohci0: Link S400, max_rec 2048 bytes. > Apr 22 13:22:46 gattaca /kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0 > Apr 22 13:22:46 gattaca /kernel: if_fwe0: <Ethernet over FireWire> on firewire0 > Apr 22 13:22:46 gattaca /kernel: if_fwe0: Fake Ethernet address: 02:40:63:00:82:f1 > Apr 22 13:22:46 gattaca /kernel: fwohci0: Initiate bus reset > Apr 22 13:22:46 gattaca /kernel: fwohci0: BUS reset > Apr 22 13:22:46 gattaca /kernel: fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > Apr 22 13:23:58 gattaca /kernel: WARNING: driver fw should register devices with make_dev() (dev_t = "#fw/0") > > This is my kldstat : > gattaca# kldstat > Id Refs Address Size Name > 1 4 0xc0100000 43d918 kernel > 2 2 0xc23d1000 12000 firewire.ko > 3 1 0xc23e7000 8000 sbp.ko > 4 1 0xc3b08000 6000 umass.ko > > I tried "kldload da", but it fails with : > kldload: can't load da: No such file or directory > > Idem with scbus > > gattaca# fdisk da0 > fdisk: cannot open disk /dev/da0: Device not configured > > > -- > Christophe BAEGERT c.baegert@europeanservers.net > > >>>>>>>>>>>>> http://www.europeanservers.net <<<<<<<<<<<<< > --------------- Ultra fast internet servers -------------- > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Christophe BAEGERT c.baegert@europeanservers.net >>>>>>>>>>>>> http://www.europeanservers.net <<<<<<<<<<<<< --------------- Ultra fast internet servers --------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040426193050.GA31508>