Date: Fri, 19 Mar 2004 20:35:40 -0600 From: Barry Pederson <bp@barryp.org> To: Stijn Hoop <stijn@win.tue.nl>, Jamie Bowden <ragnar@sysabend.org>, stable@freebsd.org Subject: Re: ATI Radeon 9600 SE & OpenGL? Message-ID: <405BADFC.2020704@barryp.org> In-Reply-To: <20040319195637.GA93135@pcwin002.win.tue.nl> References: <7670000.1079480581@palle.girgensohn.se> <13770000.1079537744@rambutan.pingpong.net> <40591A47.1C6617C7@kuzbass.ru> <33830000.1079712277@durian.pingpong.net> <20040319163201.GA16433@svzserv.kemerovo.su> <405B2D7A.5050309@barryp.org> <20040319195637.GA93135@pcwin002.win.tue.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Stijn Hoop wrote: >>So does the 3D acceleration actually work in your setup? > > It does in mine: > > agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 > > later after starting X: > > drm0: <ATI Radeon RV280 9200 SE> port 0xd800-0xd8ff mem 0xdf000000-0xdf00ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1 > > And glxgears gets me an acceptable framerate. Unfortunately I'm not at the > console or I'd show you the numbers. > > I just put this card in the machine last week and I had to upgrade to > XFree86-4-Server-snap port but other than that I didn't do anything fancy > iirc. > > XF86Config attached fwiw. > > HTH, > > --Stijn Thanks, having a known-working configuration to sure helps, but after taking your config and just reducing the "Modes" list in the "Screen" section to something my monitor can handle - I still get the same result, a hard hang with a black screen. Jamie Bowden wrote: >>I end up just pulling the power cord and then letting it >>reboot and go through a fsck. > > > Instead, hold the power button down for ~15 seconds. Much less > trauma on the hardware than pulling the plug. Thanks, that's good to know - ended up giving that a try too :) Barry
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?405BADFC.2020704>