Date: Thu, 18 Apr 2002 10:24:00 -0700 From: "Drew Tomlinson" <drew@mykitchentable.net> To: <stable@freebsd.org> Subject: options PNPBIOS Message-ID: <003101c1e6fd$d50714d0$c22a6ba5@lc.ca.gov>
next in thread | raw e-mail | index | archive | help
I compiled a kernel with options PNPBIOS as instructed in LINT to get my
sound card working. The machine is a Pentium II Pro. I have ensured
that the BIOS is configured for PNP OS but still get these messages:
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c01> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
I've searched Google and found others with this problem but no
solutions. Is PNPBIOS documented somewhere? Where should I start?
Thanks,
Drew
P.S. Here is my dmesg output in it's entirety:
milkmaker> dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE-p3 #4: Wed Apr 17 14:25:18 PDT 2002
tomlinson_dr@milkmaker.lc.ca.gov:/usr/obj/usr/src/sys/MILKMAKER
Timecounter "i8254" frequency 1193273 Hz
CPU: Pentium Pro (199.45-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
>
real memory = 134217728 (131072K bytes)
avail memory = 127352832 (124368K bytes)
Preloaded elf kernel "kernel" at 0xc033c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033c09c.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata1: at 0x170 irq 15 on atapci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem
0xffbee000-0xffbeefff irq 11 at device 11.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfe80-0xfebf irq 9 at
device 15.0 on pci0
xl0: Ethernet address: 00:60:08:19:88:b2
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1370> port 0xff00-0xff3f irq 10 at device 17.0 on pci0
pci0: <ATI Mach64-GU graphics accelerator> at 19.0
orm0: <Option ROMs> at iomem
0xc0000-0xc87ff,0xc8800-0xccfff,0xea000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0
vpo0: NIBBLE mode
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c01> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
acd0: CDROM <TOSHIBA CD-ROM XM-5702B> at ata1-master using PIO3
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <CONNER CTT8000-S 1.17> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
da3 at vpo0 bus 0 target 6 lun 0
da3: <IOMEGA ZIP 100 D.13> Removable Direct Access SCSI-2 device
da3: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <DEC RZ28L-AS (C) DEC 0654> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da2: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <DEC RZ28D (C) DEC 0010> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
Mounting root from ufs:/dev/da0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003101c1e6fd$d50714d0$c22a6ba5>