Date: Tue, 25 Mar 2003 07:58:24 +0100 From: "Harald Schmalzbauer" <H@Schmalzbauer.de> To: "Steve Willoughby" <steve@ichips.intel.com>, <freebsd-questions@FreeBSD.ORG> Subject: RE: Can't get PCI128 sound card to be recognized Message-ID: <COEPJCIGIIIGNLPOKJMDOENGDCAA.H@Schmalzbauer.de> In-Reply-To: <200303250111.h2P1B01c027991@plxs0062.pdx.intel.com>
next in thread | previous in thread | raw e-mail | index | archive | help
owner-freebsd-questions@FreeBSD.ORG wrote: > Cc: steve@ichips.intel.com > Subject: Can't get PCI128 sound card to be recognized Perhaps you should change your BIOS settings to "no PnP OS" > > > I have an older Pentium system I'd like to just use as a sort of > home entertainment server (read "mp3 player for house sound system, > X10, etc"). > > I just put in a new PCI128 sound card, but am having trouble > getting it to work. I think I've got the right set of drivers > enabled, but I get the following at boot time: > > pcm0: unknown revision 4 -- please report to cg@freebsd.org > pcm0: <Creative CT5880-?> port 0xfcc0-0xfcff irq 15 at device 14.0 > on pci0 pcm0: ac97 codec invalid or not present (id == 0) > device_probe_and_attach: pcm0 attach returned 6 > > It's currently running FreeBSD 4.5-RELEASE (apparently 5.0-RELEASE > doesn't recognize its hard drives for some reason, so I couldn't > upgrade as part of this exercise, but will try 4.7 next anyway). > > It looks to me like the kernel's set up for pcm support, and I did > load the snd_es137x.ko module, but I don't see how to handle the > invalid or missing codec problem. > > Anyone else run into this? > > TIA, > steve > > Full boot log follows: > > Mar 21 01:13:36 /kernel: Copyright (c) 1992-2002 The FreeBSD Project. > Mar 21 01:13:36 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, > 1989, 1991, 1992, 1993, 1994 > Mar 21 01:13:36 /kernel: The Regents of the University of > California. All rights reserved. > Mar 21 01:13:36 /kernel: FreeBSD 4.5-RELEASE #1: Fri Mar 21 00:11:15 > PST 2003 Mar 21 01:13:37 /kernel: root@:/usr/src/sys/compile/MUSE > Mar 21 01:13:37 /kernel: Timecounter "i8254" frequency 1193182 Hz > Mar 21 01:13:37 /kernel: CPU: Pentium/P54C (90.21-MHz 586-class CPU) > Mar 21 01:13:37 /kernel: Origin = "GenuineIntel" Id = 0x524 > Stepping = 4 Mar 21 01:13:37 /kernel: > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Mar 21 01:13:37 > /kernel: real memory = 33554432 (32768K bytes) Mar 21 01:13:37 > /kernel: avail memory = 27652096 (27004K bytes) Mar 21 01:13:37 > /kernel: Preloaded elf kernel "kernel" at 0xc0504000. Mar 21 01:13:37 > /kernel: Preloaded elf module "snd_es137x.ko" at 0xc050409c. Mar 21 > 01:13:37 /kernel: can't re-use a leaf (es_debug)! Mar 21 01:13:37 > /kernel: Preloaded elf module "snd_pcm.ko" at 0xc0504140. Mar 21 > 01:13:37 /kernel: Intel Pentium detected, installing workaround for > F00F bug Mar 21 01:13:37 /kernel: md0: Malloc disk > Mar 21 01:13:37 /kernel: npx0: <math processor> on motherboard > Mar 21 01:13:37 /kernel: npx0: INT 16 interface > Mar 21 01:13:37 /kernel: pcib0: <Host to PCI bridge> on motherboard > Mar 21 01:13:37 /kernel: pci0: <PCI bus> on pcib0 > Mar 21 01:13:37 /kernel: ign0 port 0x3f4-0x3f7,0x1f0-0x1f7 at device > 1.0 on pci0 > Mar 21 01:13:37 /kernel: isab0: <Intel 82378IB PCI to ISA bridge> at > device > 2.0 on pci0 > Mar 21 01:13:37 /kernel: isa0: <ISA bus> on isab0 > Mar 21 01:13:37 /kernel: pci0: <ATI Mach64-GX graphics accelerator> > at 3.0 Mar 21 01:13:37 /kernel: pci0: <ATI Mach64-GU graphics > accelerator> at 12.0 Mar 21 01:13:37 /kernel: pcm0: unknown revision > 4 -- please report to cg@freebsd.org > Mar 21 01:13:37 /kernel: pcm0: <Creative CT5880-?> port > 0xfcc0-0xfcff irq 15 at device 14.0 on pci0 > Mar 21 01:13:37 /kernel: pcm0: ac97 codec invalid or not present (id > == 0) Mar 21 01:13:37 /kernel: device_probe_and_attach: pcm0 attach > returned 6 Mar 21 01:13:37 /kernel: orm0: <Option ROMs> at iomem > 0xc0000-0xc7fff,0xed000-0xedfff on isa0 > Mar 21 01:13:37 /kernel: fdc0: <NEC 72065B or clone> at port > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > Mar 21 01:13:37 /kernel: fdc0: FIFO enabled, 8 bytes threshold > Mar 21 01:13:37 /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > Mar 21 01:13:38 /kernel: ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on > isa0 Mar 21 01:13:38 /kernel: atkbdc0: <Keyboard controller (i8042)> > at port 0x60,0x64 on isa0 > Mar 21 01:13:38 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on > atkbdc0 Mar 21 01:13:38 /kernel: kbd0 at atkbd0 > Mar 21 01:13:38 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df > iomem 0xa0000-0xbffff on isa0 > Mar 21 01:13:38 /kernel: sc0: <System console> at flags 0x100 on isa0 > Mar 21 01:13:38 /kernel: sc0: VGA <16 virtual consoles, flags=0x300> > Mar 21 01:13:38 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 > on isa0 Mar 21 01:13:38 /kernel: sio0: type 16550A > Mar 21 01:13:38 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 > Mar 21 01:13:38 /kernel: sio1: type 16550A > Mar 21 01:13:38 /kernel: ppc0: <Parallel port> at port 0x378-0x37f > irq 7 on isa0 > Mar 21 01:13:38 /kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) > in COMPATIBLE mode > Mar 21 01:13:38 /kernel: plip0: <PLIP network interface> on ppbus0 > Mar 21 01:13:38 /kernel: lpt0: <Printer> on ppbus0 > Mar 21 01:13:38 /kernel: lpt0: Interrupt-driven port > Mar 21 01:13:38 /kernel: ppi0: <Parallel I/O> on ppbus0 > Mar 21 01:13:38 /kernel: pca0 at port 0x40 on isa0 > Mar 21 01:13:38 /kernel: ad0: 515MB <WDC AC2540H> [1048/16/63] at > ata0-master BIOSPIO > Mar 21 01:13:38 /kernel: acd0: CDROM <CD-ROM CDU621-D> at ata0-slave > using BIOSPIO > Mar 21 01:13:38 /kernel: Mounting root from ufs:/dev/ad0s1a > Mar 21 01:14:05 login: ROOT LOGIN (root) ON ttyv0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?COEPJCIGIIIGNLPOKJMDOENGDCAA.H>