Date: Tue, 13 Feb 2001 19:59:34 -0600 From: "Corey G." <ctgaff@telocity.com> To: freebsd-stable@FreeBSD.ORG Subject: EMU10K - SB Live - unable to map register space Message-ID: <20010213195934.A55128@telocity.com>
next in thread | raw e-mail | index | archive | help
With a stable snapshot that is two weeks old I get the following error with my SB Live audio card. I am not sure if it's related to the OS or my hardware since it was not installed previously. pcm0: <Creative EMU10K1> at device 15.0 on pci0 pcm0: unable to map register space device_probe_and_attach: pcm0 attach returned 6 I turned off PNP in the bios as someone recommended earlier but it did not solve the problem. Any suggestions would be appreciated. Here is a complete dmesg: ------------------------ real memory = 469762048 (458752K bytes) avail memory = 454258688 (443612K bytes) Preloaded elf kernel "kernel" at 0xc02f3000. Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci0: <3Dfx Voodoo 3 graphics accelerator> at 13.0 irq 11 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0x48000000-0x480fffff,0x48100000-0x 100fff irq 11 at device 14.0 on pci0 fxp0: Ethernet address 00:90:27:c6:fa:2f pcm0: <Creative EMU10K1> at device 15.0 on pci0 pcm0: unable to map register space device_probe_and_attach: pcm0 attach returned 6 atapci0: <Promise ATA100 controller> port 0x1440-0x147f,0x1494-0x1497,0x1488-0x148f,0x1490-0x1493, 1480-0x1487 mem 0x48200000-0x4821ffff irq 11 at device 16.0 on pci0 ata2: at 0x1480 on atapci0 ata3: at 0x1488 on atapci0 isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel PIIX4 ATA33 controller> at device 20.1 on pci0 atapci1: Busmastering DMA not supported pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 chip1: <Intel 82371AB Power management controller> port 0xfc00-0xfc0f at device 20.3 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, limited logging IPsec: Initialized Security Association Processing. ad4: 29311MB <Maxtor 53073H4> [59554/16/63] at ata2-master UDMA100 acd0: CDROM <FX4820T> at ata3-master using PIO4 Mounting root from ufs:/dev/ad4s1a -- Best Regards, Corey To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010213195934.A55128>