Date: Thu, 28 May 2009 18:45:37 +0900 From: "YAMAMOTO, Taku" <taku@tackymt.homeip.net> To: vova@fbsd.ru Cc: acpi@freebsd.org, mobile@freebsd.org Subject: Re: Any success with Lenovo T60 Message-ID: <20090528184537.b2ac4798.taku@tackymt.homeip.net> In-Reply-To: <1243346852.2384.62.camel@localhost> References: <1243346852.2384.62.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Multipart=_Thu__28_May_2009_18_45_37_+0900_vTiVoHcAFd4HRcme
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Hi Vladimir,
I have an X60 running 8.0-current/i386 as of Apr. 29, 2009
which can successfully suspend and resume, though things may be a bit
different from your case.
There were a couple of pitfalls which I ran into:
0. Pristine kernels for i386 SMP don't support the resume yet.
We can either use amd64 ones, stick on i386 UP kernels or apply
unofficial patch floating around.
1. DO NOT DISABLE the built-in modem! (It took almost 2 weeks to identify!)
Disabling it ends up with hanging machine on resume.
2. Disable the USB while suspending; otherwise NMI parity error occurs
on resume. (usb2 stack only; the old USB stack didn't have this problem)
In rc.suspend (the magic to turn the root hubs off):
usbconfig -a 1 set_config 255
In rc.resume (the magic to turn the root hubs on again):
usbconfig -a 1 set_config 0
Cheers,
--
-|-__ YAMAMOTO, Taku
| __ < <taku@tackymt.homeip.net>
- A chicken is an egg's way of producing more eggs. -
--Multipart=_Thu__28_May_2009_18_45_37_+0900_vTiVoHcAFd4HRcme
Content-Type: text/plain;
name="dmesg-biotite.log"
Content-Disposition: attachment;
filename="dmesg-biotite.log"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #181: Thu May 7 08:46:45 JST 2009
yamamoto@biotite:/home/yamamoto/work/build/biotite/usr/src/sys/BIOTITE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 1073741824 (1024 MB)
avail memory = 1032323072 (984 MB)
ACPI APIC Table: <LENOVO TP-7B >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length: 0 102C/0 [20070320]
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
no match for ZwOpenKey
no match for IoOpenDeviceRegistryKey
no match for ZwCreateKey
no match for ZwDeleteKey
acpi0: <LENOVO TP-7B> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 1100
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xee100000-0xee17ffff,0xd0000000-0xdfffffff,0xee200000-0xee23ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i945GM> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xee180000-0xee1fffff at device 2.1 on pci0
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xee240000-0xee243fff irq 17 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090401_0132
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 6.9.9> port 0x2000-0x201f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:16:d3:2f:f4:65
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
ndis0: <11a/b/g/n Wireless LAN Mini-PCI Express Adapter> mem 0xedf00000-0xedf0ffff irq 17 at device 0.0 on pci3
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pci12: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <UHCI (generic) USB controller> on uhci2
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <UHCI (generic) USB controller> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xee444000-0xee4443ff irq 19 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci21: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
pci21: <serial bus, FireWire> at device 0.1 (no driver attached)
sdhci0: <RICOH R5C822 SD> mem 0xe4301800-0xe43018ff irq 18 at device 0.2 on pci21
sdhci0: 1 slot(s) allocated
sdhci0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7M SATA300 controller> port 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf mem 0xee444400-0xee4447ff irq 16 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI Version 01.10 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x18e0-0x18ff irq 23 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_dock0: <ACPI Docking Station> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 114473MB <FUJITSU MHV2120BH PL 0084002F> at ata2-master SATA150
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
ugen3.2: <STMicroelectronics> at usbus3
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
--Multipart=_Thu__28_May_2009_18_45_37_+0900_vTiVoHcAFd4HRcme--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090528184537.b2ac4798.taku>