Date: Sat, 25 Nov 2006 22:27:46 +0100 From: Adriaan de Groot <groot@kde.org> To: freebsd-amd64@freebsd.org Subject: Asus M2NPV-MX success Message-ID: <200611252227.47280.groot@kde.org>
next in thread | raw e-mail | index | archive | help
--nextPart3497999.zeNSYGbviN Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Although I know that send-pr is the right way to update the motherboard=20 compatibility list, I'll just drop a note on this list about success with t= he=20 Asus M2NPV-MX board -- that way Google and thus potential users can find it. The Asus M2NPV-VM is already on the list, described by Bernd Selig. It does= n't=20 work according to the list in 6.1-R; I'm using 6.2-PRE and the -MX board=20 (same nForce430, same GeForce 6150) is mostly fine. Let's take a look at what "mostly" means: ACPI is fine. Compared to the last NF430 board I bought, where I needed a h= ex=20 editor to fix the DSDT. I have not tried suspending this machine yet, nor using powernow or cpufreq= =2E I=20 mean, kldload cpufreq recognizes both cores, and then I have no clue what t= o=20 do with it. mbmon gives reasonable temperature values and totally bogus rotation and=20 voltage reports. nfsmb module loads (hoping to use mbmon -S) but then I don= 't=20 know what to do with it. OHCI and EHCI are fine. SATA controller is fine; don't have any SATA II drives to try SATA 300 with= ,=20 though. Have not tried the nvRAID functionality yet either. nve is fine. Haven't pushed more than a few GB through it so far moving DVD= =20 rips around, but doesn't seem to have issues. By using Ariff Abdullah's HDA driver (=20 http://lists.freebsd.org/pipermail/freebsd-current/2006-October/066357.html= )=20 sound works. Tipitina sounds just great. By patching xorg 6.9.0 with openSUSE's changes I got xorg to recognize the= =20 6150 with the nv driver. Dual head setups seem out of the question though;= =20 I've been searching around and get no end of conflicting reports about it. =3D=3D=3D dmesg follows Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD is a registered trademark of The FreeBSD Foundation. =46reeBSD 6.2-PRERELEASE #0: Sat Nov 25 22:27:49 CET 2006 root@eggs.englishbreakfastnetwork.org:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2405.03-MHz K8-class C= PU) Origin =3D "AuthenticAMD" Id =3D 0x40fb2 Stepping =3D 2 =20 =46eatures=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=3D0x2001<SSE3,CX16> AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=3D0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory =3D 2112815104 (2014 MB) avail memory =3D 2028183552 (1934 MB) =46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at= =20 device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22= at=20 device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port=20 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port=20 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem=20 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce MCP51 SATA300 controller> port=20 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem=20 0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci4: <ACPI PCI bus> on pcib4 rl0: <RealTek 8139 10/100BaseTX> port 0x9c00-0x9cff mem 0xfdbff000-0xfdbff0= ff=20 irq 17 at device 9.0 on pci4 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0a:cd:0e:28:b3 pci0: <multimedia> at device 16.1 (no driver attached) nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0xc800-0xc807 mem=20 0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0 nve0: Ethernet address 00:17:31:7f:a8:ad miibus1: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=20 1000baseT-FDX, auto nve0: Ethernet address: 00:17:31:7f:a8:ad acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDROM <TSSTcorpDVD-ROM SH-D162C/TS01> at ata0-master UDMA33 acd1: CDRW <LITE-ON LTR-48246S/SS0B> at ata0-slave UDMA33 ad4: 194481MB <Maxtor 6L200M0 BANC1E00> at ata2-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a pcm0: <NVidia MCP51 High Definition Audio Controller> mem=20 0xfe024000-0xfe027fff irq 21 at device 16.1 on pci0 pcm0: <HDA Codec: Analog Device AD1986A> pcm0: <HDA Driver Revision: 20061017_0033> =2D-=20 These are your friends - Adem GPG: FEA2 A3FE Adriaan de Groot --nextPart3497999.zeNSYGbviN Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (FreeBSD) iD8DBQBFaLVTdqzuAf6io/4RAsxjAJ9JrlFfXcZTzJMam+7J9YgofCX0kwCdFrjw 7GXZTwakBa1yuy8fWHyBFdE= =TOib -----END PGP SIGNATURE----- --nextPart3497999.zeNSYGbviN--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200611252227.47280.groot>