Date: Tue, 15 Oct 2002 13:09:48 -0600 From: "Kenneth D. Merry" <ken@kdm.org> To: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> Cc: jhb@FreeBSD.ORG, current@FreeBSD.ORG Subject: Re: PCI problems with today's current Message-ID: <20021015130947.A86610@panzer.kdm.org> In-Reply-To: <20021015.221753.96914499.iwasaki@jp.FreeBSD.org>; from iwasaki@jp.FreeBSD.org on Tue, Oct 15, 2002 at 10:17:53PM %2B0900 References: <20021005230043.A19273@panzer.kdm.org> <20021006.142541.67030894.iwasaki@jp.FreeBSD.org> <20021014153617.A80354@panzer.kdm.org> <20021015.221753.96914499.iwasaki@jp.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--fdj2RfSjLxBAspz7
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Tue, Oct 15, 2002 at 22:17:53 +0900, Mitsuru IWASAKI wrote:
> Hi,
> > > But never mind, you can force to compile the ASL and generate DSDT;
> > > # iasl -i SupermicroP3TDE6.new.asl
> > > then copy generated acpi_dsdt.aml to /boot/.
> > > # cp acpi_dsdt.aml /boot/
> >
> > Okay, I did that, and then typed the following at the boot prompt:
> >
> > set acpi_dsdt_load="YES"
> > set acpi_dsdt_name="/boot/acpi_dsdt.aml"
> >
> > Things still don't seem to be working properly. I've attached dmesg
> > output.
> [snip]
> > Preloaded elf kernel "/boot/kernel.test32/kernel" at 0xc0569000.
> > Preloaded elf module "/boot/kernel.test32/acpi.ko" at 0xc05690b0.
> > Timecounter "i8254" frequency 1193182 Hz
>
> Hmm, it seems that /boot/acpi_dsdt.aml doesn't to be loaded.
> I think `set acpi_dsdt_load="YES"' at the boot prompt is not
> effective.
> How about having acpi_dsdt_load="YES" in your loader.conf, or
> typing `load -t acpi_dsdt /boot/acpi_dsdt.aml' at the boot prompt ?
I tried 'load -t...', and the aml file seems to get loaded. Things don't
fail in the same way now, but I still can't see ti0, which is on the PCI
bus in question.
I've attached the dmesg.
Ken
--
Kenneth Merry
ken@kdm.org
--fdj2RfSjLxBAspz7
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.nargothrond.20021015"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Sun Oct 13 22:38:04 MDT 2002
ken@gondolin.kdm.org:/usr/obj/usr/home/ken/perforce/FreeBSD-ken/src/sys/gondolin
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0570000.
Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc05700a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05700f0.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2684289024 (2621376K bytes)
avail memory = 2602532864 (2541536K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
ACPI: DSDT was overridden.
ACPI-0375: *** Info: Table [DSDT] replaced by host OS
ACPI-0623: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC RCCNILE > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
Using $PIR table, 10 entries at 0xc00f52e0
can't fetch resources for \\_SB_.NRTH - AE_AML_OPERAND_TYPE
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
IOAPIC #1 intpin 10 -> irq 2
IOAPIC #1 intpin 11 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci1: <ACPI PCI bus> on pcib1
IOAPIC #1 intpin 14 -> irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeafc000-0xfeafcfff irq 2 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 5 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:bb:74
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 15.1 (no driver attached)
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib2: <ACPI Host-PCI bridge> on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci3: <ACPI PCI bus> on pcib2
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xcbfff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pmtimer0 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
Waiting 2 seconds for SCSI devices to settle
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da1s1a
cd0 at ahc1 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-8XCS 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ohci0: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 10 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
--fdj2RfSjLxBAspz7--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021015130947.A86610>