Date: Sat, 23 Sep 2000 07:31:16 -0400 (EDT) From: Donn Miller <dmmiller@zoominternet.net> To: current@freebsd.org Subject: Re: fdc0 and ata1 issues Message-ID: <200009231131.e8NBVGI01531@acs-24-154-25-35.zoominternet.net> In-Reply-To: <200009221448.JAA20935@freebsd.netcom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In article <200009221448.JAA20935@freebsd.netcom.com> you wrote:
> I am also seeing the fdc0 problem "fdc0: cannot reserve I/O port range".
What's up with the fdc driver? I'm seeing the exact same thing. There was
never any heads-up about this. Surely, the person who broke it knows about
it. :-( It's nice to have a warning before I go and recompile my kernel.
But then again, I wouldn't be running -current if I didn't expect problems.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Sep 21 18:23:45 EDT 2000
dmmiller@acs-24-154-25-35.zoominternet.net:/usr/src/sys/compile/CUSTOM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (166.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 62914560 (61440K bytes)
avail memory = 57683968 (56332K bytes)
Preloaded elf kernel "kernel" at 0xc038c000.
Intel Pentium detected, installing workaround for F00F bug
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> port 0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 11 at device 1.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xb800-0xb81f irq 12 at device 10.0 on pci0
ed0: address 00:c0:df:ed:0b:17, type NE2000 (16 bit)
pci0: <SiS 5597/98 SVGA controller> at 19.0 irq 11
fdc0: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x2e8-0x2ef irq 10 flags 0x10 on isa0
sio0: type 16550A
sio2 at port 0x3e8-0x3ef irq 4 on isa0
sio2: type 16550A
mse0: <Bus/InPort Mouse> at port 0x23c-0x23f irq 3 on isa0
sbc0: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc0
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0303> can't assign resources
ad0: 3093MB <FUJITSU MPB3032ATU> [6704/15/63] at ata0-master UDMA33
ad1: 1040MB <M1614TA> [2114/16/63] at ata0-slave WDMA2
acd0: CDROM <BCD-24X 1997-06-27> at ata1-master using WDMA2
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009231131.e8NBVGI01531>