Date: Wed, 9 Apr 2003 19:23:37 -0400 From: Maxime Romano <verbophobe@jewcrew.org> To: freebsd-smp@freebsd.org Subject: Tyan Tiger S2460 woes Message-ID: <20030409232337.GA1692@maxime>
next in thread | raw e-mail | index | archive | help
--wRRV7LY7NUeQGEoC
Content-Type: text/plain; format=flowed; charset=ISO-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Good morning.
It seems my brand new Tyan Tiger S2460 refuses to boot once tried on an
SMP kernel, even though it works fine on GENERIC or any other non-SMP
kernel.
Everything boots normally (i.e.: The processors are detected, no
abnormal errors are reported) until it gets to this line:
acd0: DVD-ROM <HITACHI DVD-ROM GD-2500> at ata1-master PIO4
.. at which point it just freezes and doesn't budge. Numlock doesn't
work, and wildly mashing the keyboard buttons won't produce a sound.
Does anyone have any insight as to what might be bad?
Attached is my full dmesg when booted off generic.
- Maxime Romano
--wRRV7LY7NUeQGEoC
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Mon Jan 1 05:43:22 EST 2001
root@maxime:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel.generic/kernel" at 0xc0663000.
Preloaded elf module "/boot/kernel.generic/acpi.ko" at 0xc06630b0.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1466724317 Hz
CPU: AMD Athlon(tm) Processor (1466.72-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xffffffffc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 514609152 (490 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
acpi0: power button is handled as a fixed feature programming model.
acpi0: sleep button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xdc000-0xdffff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0x10d0-0x10d3 mem 0xe8400000-0xe8400fff,0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 ATA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ohci0: <AMD-766 USB Controller> mem 0xdc000-0xdcfff irq 11 at device 7.4 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AMD-766 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1000-0x107f mem 0xe8001000-0xe800107f irq 10 at device 10.0 on pci0
xl0: Ethernet address: 00:01:02:77:4a:96
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 13.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [Z00Q] in namespace, AE_NOT_FOUND
ACPI-1287: *** Error: Method execution failed, AE_NOT_FOUND
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 28629MB <QUANTUM FIREBALLP AS30.0> [58168/16/63] at ata0-master UDMA100
ad1: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-slave UDMA100
acd0: DVD-ROM <HITACHI DVD-ROM GD-2500> at ata1-master PIO4
MBREXT Slice 5 on ad1s3:
0000 00 01 c1 ff 0b fe ff ff 3f 00 00 00 bd c9 38 01 |........?.....8.|
[0] f:00 typ:11 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:20498877
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s2a
drm0: <ATI Radeon QD (AGP)> port 0x2000-0x20ff mem 0xe8100000-0xe817ffff,0xf0000000-0xf7ffffff irq 10 at device 5.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
--wRRV7LY7NUeQGEoC--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030409232337.GA1692>