Date: 12 Jan 99 02:45:17 America/Fort_Wayne From: Stephen Palmer <slpalmer@netscape.net> To: son@prism.uvsq.fr, Stephen Palmer <slpalmer@netscape.net> Cc: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>, freebsd-current@FreeBSD.ORG, dfr@nlsystems.com Subject: Re: [Re: [Re: [Re: Request fo help with Zip Drive on vpo0 in -current]]] Message-ID: <19990112024518.15270.qmail@www0y.netaddress.usa.net>
next in thread | raw e-mail | index | archive | help
Requested logs are appended to the end of this message...
I hope this helps. Please keem me informed!
Stephen L. Palmer
slpalmer@netscape.net
son@prism.uvsq.fr wrote:
> On Sun, Jan 10, 1999 at 10:39:23PM +0000, Stephen Palmer wrote:
> >
> >Success!
> > da0 is now detected on my system as long as I give
> >flags 0x1 or 0x4 to ppc0. This forces the chipset
> >to "Generic" rather than "SMC". Not setting the flags
> >causes the chipset to be detected correctly, but da0
> >not to be detected. Thanks for the good work! I can
> >send verbose dmesg output to anyone interested in squashing
> >the remaining inconvieniances.
>
> I guess the last committed patch solved your problem, not the 0x4 flags.
> Or it means that your chipset does run anymore properly in ECP+EPP mode and
> this is odd.
>
> Yes, send me your logs with/without the flags set.
>
****dmesg from boot with no flags set on ppc0****
tel_piix_status: secondary master/slave sample = 3, master/slave recovery = 3
intel_piix_status: secondary slave fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
ide_pci: busmaster 1 status: 04 from port: 0000f00a
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[0]: type 4, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
found-> vendor=0x10de, dev=0x0020, revid=0x03
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 1, range 32, base e0000000, size 24
map[1]: type 3, range 32, base e1000000, size 24
vga0: <VGA-compatible display device> rev 0x03 int a irq 10 on pci0.8.0
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x1b9e4f4c Comp ID: PNPb02f
[0x2fb0d041]
Called nullpnp_probe with tag 0x00000001, type 0xc5008c0e
Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041
port 0x0220 0x0330 0x0388 0x0000 irq 9:0 drq 1:7 en 1
port 0x0220 0x0330 0x0388 0x0000 irq 9:0 drq 1:7 en 1
pcm1 (SB16pnp <SB16 PnP> sn 0x1b9e4f4c) at 0x220-0x22f irq 9 drq 1 flags 0x17
on isa
Probing for devices on the ISA bus:
video: RTC equip. code:0x0f, DCC code:0x09
video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16
video: param table EGA/VGA:0xf00c06f4, CGA/MDA:0
video: rows_offset:1
video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4
video#0: init mode:24, bios mode:3, current mode:24
video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k
video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000
video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000
video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000
video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000
video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000
video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000
video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000
video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000
video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000
video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000
video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000
video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000
video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: the current keyboard controller command byte 0047
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0: keyboard device ID: ab41
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x21 0x1 0x1
sio1 at 0x2f8-0x2ff irq 5 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
psm0: current command byte:0047
kbdio: TEST_AUX_PORT status:0002
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
psm0: the aux port is not functioning (2).
psm0 not found at 0x60
pcm0 not probed due to drq conflict with pcm1 at 1
ppc: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC36400L>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
acd0: drive speed 689 - 4134KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-RW 120mm photo disc loaded, unlocked
wdc1: unit 1 (atapi): <Memorex CRW-1622/ D3.7>, removable, dma, iordy
acd1: drive speed 344 - 1034KB/sec, 1024KB cache
acd1: supported read types: CD-R, CD-RW, CD-DA, packet track
acd1: supported write types: CD-R, CD-RW, test write
acd1: Audio: play, 128 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked, lock protected
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 354735721 bytes/sec
bzero() bandwidth = 544959128 bytes/sec
apm0: disabled, not probed.
imasks: bio c008c040, tty c00702b2, net c00702b2
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
new masks: bio c008c040, tty c00702b2, net c00702b2
Waiting 15 seconds for SCSI devices to settle
Considering FFS root f/s.
changing root device to wd0s2a
wd0s1: type 0xb, start 63, end = 8112824, size 8112762 : OK
wd0s2: type 0xa5, start 10104885, end = 12594959, size 2490075 : OK
wd0s3: type 0xa5, start 8112825, end = 10104884, size 1992060 : OK
Linux-ELF exec handler installed
************************END DMESG**************************
****dmesg from boot with 'flags ppc0 0x4' set ******
led
ide_pci: busmaster 1 status: 04 from port: 0000f00a
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[0]: type 4, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
found-> vendor=0x10de, dev=0x0020, revid=0x03
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 1, range 32, base e0000000, size 24
map[1]: type 3, range 32, base e1000000, size 24
vga0: <VGA-compatible display device> rev 0x03 int a irq 10 on pci0.8.0
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x1b9e4f4c Comp ID: PNPb02f
[0x2fb0d041]
Called nullpnp_probe with tag 0x00000001, type 0xc5008c0e
Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041
port 0x0220 0x0330 0x0388 0x0000 irq 9:0 drq 1:7 en 1
port 0x0220 0x0330 0x0388 0x0000 irq 9:0 drq 1:7 en 1
pcm1 (SB16pnp <SB16 PnP> sn 0x1b9e4f4c) at 0x220-0x22f irq 9 drq 1 flags 0x17
on isa
Probing for devices on the ISA bus:
video: RTC equip. code:0x0f, DCC code:0x09
video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16
video: param table EGA/VGA:0xf00c06f4, CGA/MDA:0
video: rows_offset:1
video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4
video#0: init mode:24, bios mode:3, current mode:24
video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k
video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000
video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000
video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000
video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000
video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000
video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000
video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000
video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000
video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000
video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000
video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000
video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000
video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: the current keyboard controller command byte 0047
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0: keyboard device ID: ab41
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x21 0x1 0x1
sio1 at 0x2f8-0x2ff irq 5 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
psm0: current command byte:0047
kbdio: TEST_AUX_PORT status:0002
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
psm0: the aux port is not functioning (2).
psm0 not found at 0x60
pcm0 not probed due to drq conflict with pcm1 at 1
ppc: parallel port found at 0x378
ppc0:
ppc0 at 0x378 irq 7 flags 0x4 on isa
ppc0: Generic chipset (EPP-only) in EPP mode (EPP 1.9)
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
vpo0: EPP 1.9 mode
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC36400L>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
acd0: drive speed 689 - 4134KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-RW 120mm photo disc loaded, unlocked
wdc1: unit 1 (atapi): <Memorex CRW-1622/ D3.7>, removable, dma, iordy
acd1: drive speed 344 - 1034KB/sec, 1024KB cache
acd1: supported read types: CD-R, CD-RW, CD-DA, packet track
acd1: supported write types: CD-R, CD-RW, test write
acd1: Audio: play, 128 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked, lock protected
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 354484225 bytes/sec
bzero() bandwidth = 545256270 bytes/sec
apm0: disabled, not probed.
imasks: bio c008c040, tty c00702b2, net c00702b2
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
new masks: bio c008c040, tty c00702b2, net c00702b2
Waiting 15 seconds for SCSI devices to settle
(probe0:vpo0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe0:vpo0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe0:vpo0:0:6:0): Invalid field in CDB
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 D.17> Removable Direct Access SCSI-2 device
da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
Considering FFS root f/s.
changing root device to wd0s2a
wd0s1: type 0xb, start 63, end = 8112824, size 8112762 : OK
wd0s2: type 0xa5, start 10104885, end = 12594959, size 2490075 : OK
wd0s3: type 0xa5, start 8112825, end = 10104884, size 1992060 : OK
Linux-ELF exec handler installed
******************END DMESG OUTPUT*********************************
--- |
Stephen L. Palmer | Sprint Paranet
slpalmer@netscape.net \|/ slpalmer@sprintparanet.com
"There are thousands of intelligent species in the
Universe, and they all own cats." -Unknown
____________________________________________________________________
More than just email--Get your FREE Netscape WebMail account today at http://home.netscape.com/netcenter/mail
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990112024518.15270.qmail>