From owner-freebsd-current Tue Mar 7 12:12:23 2000 Delivered-To: freebsd-current@freebsd.org Received: from mta.scient.com (mta.Scient.COM [208.29.209.245]) by hub.freebsd.org (Postfix) with SMTP id 4FF3837BB7F for ; Tue, 7 Mar 2000 12:12:08 -0800 (PST) (envelope-from cnielsen@scient.com) Received: (qmail 25840 invoked from network); 7 Mar 2000 20:12:00 -0000 Received: from tep01-sfo.scient.com (HELO ender.scient.com) (208.29.209.9) by mta.scient.com with SMTP; 7 Mar 2000 20:12:00 -0000 Received: (qmail 510 invoked by uid 1001); 7 Mar 2000 20:12:27 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14533.25259.297488.968412@ender.scient.com> Date: Tue, 7 Mar 2000 12:12:27 -0800 (PST) From: Christopher Nielsen To: Sheldon Hearn Cc: cnielsen@pobox.com, current@FreeBSD.ORG Subject: Re: Getty/Init weirdness In-Reply-To: <98237.952458176@axl.ops.uunet.co.za> References: <14532.38179.208634.408231@ender.scient.com> <98237.952458176@axl.ops.uunet.co.za> X-Mailer: VM 6.72 under 21.1 (patch 9) "Canyonlands" XEmacs Lucid Reply-To: cnielsen@pobox.com Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >>>>> "Sheldon" == Sheldon Hearn writes: Sheldon> You should probably show us your /etc/ttys, not your Sheldon> kernel config. :-) Doh! I meant to do that. :-) See below. Sheldon> Also, have a look in /var/log/messages for error messages Sheldon> from getty(8). No error messages from getty, but I also forgot to include that I turned on maximum debugging for the syscons driver. I'm attaching my dmesg output, too. --- Begin dmesg output --- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #24: Mon Mar 6 20:41:55 PST 2000 root@ender.scient.com:/usr/src/sys/compile/ENDER Calibrating clock(s) ... TSC clock: 297766253 Hz, i8254 clock: 1193106 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff real memory = 133169152 (130048K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0034d000 - 0x07ef5fff, 129667072 bytes (31657 pages) sc0: releasing kbd0 sc0: kbd_release returned 0 sc0: kbd != NULL!, index:0, unit:0, flags:0x150000 sc0: keyboard 0 sc0: kbd index:0, unit:0, flags:0x350000 avail memory = 120524800 (117700K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00fe700 pnpbios: Entry = f0000:e724 Rev = 1.0 pnpbios: Event flag at 415 Other BIOS signatures found: ACPI: 000fd6e0 Preloaded elf kernel "kernel" at 0xc0334000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 40000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=4 secondarybus=2 intpin=a, irq=255 map[10]: type 1, range 32, base 50102000, size 12 found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=7 secondarybus=5 intpin=b, irq=255 map[10]: type 1, range 32, base 50101000, size 12 found-> vendor=0x1013, dev=0x6001, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcf0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=255 map[20]: type 1, range 32, base 00008400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000efa0, size 4 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x1023, dev=0x939a, revid=0xf3 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 70800000, size 23 map[14]: type 1, range 32, base 71000000, size 17 map[18]: type 1, range 32, base 70000000, size 23 pci1: on pcib1 pci1: (vendor=0x1023, dev=0x939a) at 0.0 pcic-pci0: mem 0x50102000-0x50102fff at device 2.0 on pci0 PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50102000 020000a0 b0040200 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c001ff 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818148 fba97543 90: 606283c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 0000000f: 00000000: 30000510: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pcic-pci1: mem 0x50101000-0x50101fff at device 2.1 on pci0 PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50101000 020000a0 b0070500 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c002ff 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818148 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: 30000306: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 csa0: irq 0 at device 6.0 on pci0 device_probe_and_attach: csa0 attach returned 6 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=03 status0=50 status1=01 ata1: mask=03 status0=00 status1=01 ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x8400-0x841f at device 7.2 on pci0 uhci0: Invalid irq 255 uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS device_probe_and_attach: uhci0 attach returned 6 chip1: port 0xefa0-0xefaf at device 7.3 on pci0 pnpbios: 23 devices, largest 980 bytes PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 00x4 PNP0000: start dependant pnpbios: handle 0 device ID PNP0000 (0000d041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: start dependant pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 00x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: start dependant pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x73, size=0x4, align=0x1 PNP0b00: start dependant pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: start dependant pnpbios: handle 4 device ID PNP0800 (0008d041) PNP0303: adding irq mask 00x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: start dependant pnpbios: handle 5 device ID PNP0303 (0303d041) IBM3780: adding irq mask 0x1000 IBM3780: start dependant pnpbios: handle 6 device ID IBM3780 (80374d24) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: start dependant pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0700: adding irq mask 0x40 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80 PNP0700: adding dma mask 0x4 PNP0700: start dependant pnpbios: handle 8 device ID PNP0700 (0007d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: start dependant pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x22-0x22, size=0x1, align=0 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0 PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0 PNP0c02: adding memory range 0-0x9ffff, size=0xa0000 PNP0c02: adding memory range 0xf0000-0xfffff, size=0x10000 PNP0c02: adding memory range 0x100000-0x7ffffff, size=0x7f00000 PNP0c02: adding memory range 0xffff0000-0xffffffff, size=0x10000 PNP0c02: start dependant pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37b, size=0x4, align=0 PNP0400: start dependant pnpbios: handle 11 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: start dependant pnpbios: handle 13 device ID PNP0501 (0105d041) CSC0100: adding io range 0x530-0x537, size=0x8, align=0 CSC0100: adding io range 0x388-0x38b, size=0x4, align=0 CSC0100: adding io range 0x220-0x233, size=0x14, align=0x20 CSC0100: adding irq mask 0x400 CSC0100: adding dma mask 0x2 CSC0100: adding dma mask 0x1 CSC0100: start dependant pnpbios: handle 14 device ID CSC0100 (0001630e) CSC0110: adding io range 0x538-0x53f, size=0x8, align=0 CSC0110: start dependant pnpbios: handle 15 device ID CSC0110 (1001630e) CSC0101: adding io range 0-0xffffffff, size=0, align=0 CSC0101: start dependant pnpbios: handle 16 device ID CSC0101 (0101630e) CSC0103: adding io range 0x330-0x333, size=0x4, align=0x10 CSC0103: adding irq mask 0x800 CSC0103: start dependant pnpbios: handle 17 device ID CSC0103 (0301630e) IBM3765: adding io range 0-0xffffffff, size=0, align=0 IBM3765: adding io range 0-0xffffffff, size=0, align=0 IBM3765: adding irq mask 0000 IBM3765: adding irq mask 0000 IBM3765: adding dma mask 00 IBM3765: start dependant pnpbios: handle 18 device ID IBM3765 (65374d24) IBM0071: adding irq mask 0000 IBM0071: adding io range 0-0xffffffff, size=0, align=0x1 IBM0071: adding dma mask 00 IBM0071: start dependant pnpbios: handle 19 device ID IBM0071 (71004d24) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 PNP0e03: start dependant pnpbios: handle 20 device ID PNP0e03 (030ed041) PNP0680: adding irq mask 0x4000 PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0 PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0 PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0 PNP0680: start dependant pnpbios: handle 23 device ID PNP0680 (8006d041) PNP0680: adding irq mask 0x8000 PNP0680: adding io range 0x170-0x177, size=0x8, align=0 PNP0680: adding io range 0x376-0x376, size=0x1, align=0 PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0 PNP0680: start dependant pnpbios: handle 25 device ID PNP0680 (8006d041) PNP0c02: adding io range 0x2100-0x217f, size=0x80, align=0 PNP0c02: adding io range 0x2180-0x21ff, size=0x80, align=0 PNP0c02: skipping empty range PNP0c02: start dependant pnpbios: handle 27 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 8 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: at port 0x60-0x6f on isa0 atkbd0: flags 0x2 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x54ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x2, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 04 b0 9c ce 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 04 b0 9c ce 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: releasing kbd0 sc0: kbd_release returned 0 sc0: kbd != NULL!, index:0, unit:0, flags:0x1d0000 sc0: keyboard 0 sc0: kbd index:0, unit:0, flags:0x3d0000 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic: management irq 3 pcic0: at irq 3 on isa0 pccard0: on pcic0 pccard1: on pcic0 sio0: irq maps: 0x49 0x59 0x49 0x49 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: parallel port found at 0x378 ppc0: EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode isa_probe_children: probing PnP devices unknown: can't assign resources unknown0: at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0 unknown1: at port 0x40-0x43 irq 0 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown2: at port 0xf0-0xff irq 13 on isa0 unknown: can't assign resources unknown3: at port 0xcf8-0xcff on isa0 unknown4: at port 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x15ef,0xef00-0xefaf iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x7ffffff,0xffff0000-0xffffffff on isa0 unknown: can't assign resources unknown: can't assign resources pcm0: at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 10 drq 1,0 on isa0 pcm: setmap 30000, ff00; 0xc8574000 -> 30000 pcm: setmap 40000, ff00; 0xc8584000 -> 40000 unknown5: at port 0x538-0x53f on isa0 unknown6: at port 0x10 on isa0 unknown7: at port 0x330-0x333 irq 11 on isa0 unknown: can't assign resources unknown: can't assign resources unknown8: at port 0x3e0-0x3e1 on isa0 unknown: can't assign resources unknown: can't assign resources unknown9: at port 0x2100-0x217f,0x2180-0x21ff on isa0 BIOS Geometries: 0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached IPsec: Initialized Security Association Processing. ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: ATA-3 disk at ata0 as master ad0: 7815MB (16006410 sectors), 16938 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: DVD-ROM drive at ata1 as master acd0: read 3437KB/s (3437KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA, DVD-ROM, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0a pccard: card inserted, slot 0 ad0s1: type 0xa5, start 0, end = 16006409, size 16006410 : OK start_init: trying /sbin/init scopen: dev:12,255, unit:0, vty:255 Linux-ELF exec handler installed pcic: I/O win 0 flags 17 240-24f pcic: I/O win 0 flags 7 240-24f ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 9 slot 0 on pccard0 pcic: I/O win 0 flags 17 240-24f ep0: Ethernet address 00:10:4b:de:51:8c ep0: supplying EUI64: 00:10:4b:ff:fe:de:51:8c bpf: ep0 attached svr4 ELF exec handler installed scopen: dev:12,0, unit:0, vty:0 ep0: starting DAD for fe80:0007::0210:4bff:fede:518c sc0: scclose(), done. scopen: dev:12,0, unit:0, vty:0 sc0: scclose(), done. scopen: dev:12,1, unit:0, vty:1 sc0: scclose(), done. scopen: dev:12,2, unit:0, vty:2 sc0: scclose(), done. scopen: dev:12,3, unit:0, vty:3 sc0: scclose(), done. scopen: dev:12,4, unit:0, vty:4 sc0: scclose(), done. scopen: dev:12,5, unit:0, vty:5 ep0: DAD complete for fe80:0007::0210:4bff:fede:518c - no duplicates found --- End dmesg output --- --- Begin /etc/ttys --- # # $FreeBSD: src/etc/etc.i386/ttys,v 1.6 1999/08/27 23:23:57 peter Exp $ # @(#)ttys 5.1 (Berkeley) 4/17/89 # # This file specifies various information about terminals on the system. # It is used by several different programs. Common entries for the # various columns include: # # name The name of the terminal device. # # getty The program to start running on the terminal. Typically a # getty program, as the name implies. Other common entries # include none, when no getty is needed, and xdm, to start the # X Window System. # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. # For virtual consoles, the correct type is cons25. Other # common values include network for network connections on # pseudo-terminals, dialup for incoming modem ports, and unknown # when the terminal type cannot be predetermined. # # status Must be on or off. If on, init will run the getty program on # the specified port. If the word "secure" appears, this tty # allows root login. # # name getty type status comments # # If console is marked "insecure", then init will ask for the root password # when going to single-user mode. console none unknown off insecure # ttyv0 "/usr/libexec/getty Pc" cons25 on secure # Virtual terminals ttyv1 "/usr/libexec/getty Pc" cons25 on insecure ttyv2 "/usr/libexec/getty Pc" cons25 on insecure ttyv3 "/usr/libexec/getty Pc" cons25 on insecure ttyv4 "/usr/libexec/getty Pc" cons25 on insecure ttyv5 "/usr/libexec/getty Pc" cons25 on insecure ttyv6 "/usr/libexec/getty Pc" cons25 on insecure ttyv7 "/usr/libexec/getty Pc" cons25 on insecure ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm on insecure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ttyd0 "/usr/libexec/getty std.9600" dialup off secure ttyd1 "/usr/libexec/getty std.9600" dialup off secure ttyd2 "/usr/libexec/getty std.9600" dialup off secure ttyd3 "/usr/libexec/getty std.9600" dialup off secure # Pseudo terminals ttyp0 none network ttyp1 none network ttyp2 none network ttyp3 none network ttyp4 none network ttyp5 none network ttyp6 none network ttyp7 none network ttyp8 none network ttyp9 none network ttypa none network ttypb none network ttypc none network ttypd none network ttype none network ttypf none network ttypg none network ttyph none network ttypi none network ttypj none network ttypk none network ttypl none network ttypm none network ttypn none network ttypo none network ttypp none network ttypq none network ttypr none network ttyps none network ttypt none network ttypu none network ttypv none network ttyq0 none network ttyq1 none network ttyq2 none network ttyq3 none network ttyq4 none network ttyq5 none network ttyq6 none network ttyq7 none network ttyq8 none network ttyq9 none network ttyqa none network ttyqb none network ttyqc none network ttyqd none network ttyqe none network ttyqf none network ttyqg none network ttyqh none network ttyqi none network ttyqj none network ttyqk none network ttyql none network ttyqm none network ttyqn none network ttyqo none network ttyqp none network ttyqq none network ttyqr none network ttyqs none network ttyqt none network ttyqu none network ttyqv none network ttyr0 none network ttyr1 none network ttyr2 none network ttyr3 none network ttyr4 none network ttyr5 none network ttyr6 none network ttyr7 none network ttyr8 none network ttyr9 none network ttyra none network ttyrb none network ttyrc none network ttyrd none network ttyre none network ttyrf none network ttyrg none network ttyrh none network ttyri none network ttyrj none network ttyrk none network ttyrl none network ttyrm none network ttyrn none network ttyro none network ttyrp none network ttyrq none network ttyrr none network ttyrs none network ttyrt none network ttyru none network ttyrv none network ttys0 none network ttys1 none network ttys2 none network ttys3 none network ttys4 none network ttys5 none network ttys6 none network ttys7 none network ttys8 none network ttys9 none network ttysa none network ttysb none network ttysc none network ttysd none network ttyse none network ttysf none network ttysg none network ttysh none network ttysi none network ttysj none network ttysk none network ttysl none network ttysm none network ttysn none network ttyso none network ttysp none network ttysq none network ttysr none network ttyss none network ttyst none network ttysu none network ttysv none network ttyP0 none network ttyP1 none network ttyP2 none network ttyP3 none network ttyP4 none network ttyP5 none network ttyP6 none network ttyP7 none network ttyP8 none network ttyP9 none network ttyPa none network ttyPb none network ttyPc none network ttyPd none network ttyPe none network ttyPf none network ttyPg none network ttyPh none network ttyPi none network ttyPj none network ttyPk none network ttyPl none network ttyPm none network ttyPn none network ttyPo none network ttyPp none network ttyPq none network ttyPr none network ttyPs none network ttyPt none network ttyPu none network ttyPv none network ttyQ0 none network ttyQ1 none network ttyQ2 none network ttyQ3 none network ttyQ4 none network ttyQ5 none network ttyQ6 none network ttyQ7 none network ttyQ8 none network ttyQ9 none network ttyQa none network ttyQb none network ttyQc none network ttyQd none network ttyQe none network ttyQf none network ttyQg none network ttyQh none network ttyQi none network ttyQj none network ttyQk none network ttyQl none network ttyQm none network ttyQn none network ttyQo none network ttyQp none network ttyQq none network ttyQr none network ttyQs none network ttyQt none network ttyQu none network ttyQv none network ttyR0 none network ttyR1 none network ttyR2 none network ttyR3 none network ttyR4 none network ttyR5 none network ttyR6 none network ttyR7 none network ttyR8 none network ttyR9 none network ttyRa none network ttyRb none network ttyRc none network ttyRd none network ttyRe none network ttyRf none network ttyRg none network ttyRh none network ttyRi none network ttyRj none network ttyRk none network ttyRl none network ttyRm none network ttyRn none network ttyRo none network ttyRp none network ttyRq none network ttyRr none network ttyRs none network ttyRt none network ttyRu none network ttyRv none network ttyS0 none network ttyS1 none network ttyS2 none network ttyS3 none network ttyS4 none network ttyS5 none network ttyS6 none network ttyS7 none network ttyS8 none network ttyS9 none network ttySa none network ttySb none network ttySc none network ttySd none network ttySe none network ttySf none network ttySg none network ttySh none network ttySi none network ttySj none network ttySk none network ttySl none network ttySm none network ttySn none network ttySo none network ttySp none network ttySq none network ttySr none network ttySs none network ttySt none network ttySu none network ttySv none network --- End /etc/ttys --- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message