Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 Aug 2006 17:09:49 +0800
From:      "Senandung Mendonan" <mendonan@gmail.com>
To:        freebsd-net@freebsd.org
Subject:   Re: Problem with IBM NetXtreme 1000-T GigaEthernet Adapter
Message-ID:  <94c7120b0608210209o482fef7ev1b4922d0597af666@mail.gmail.com>
In-Reply-To: <09BFF2FA5EAB4A45B6655E151BBDD90301D42713@NT-IRVA-0750.brcm.ad.broadcom.com>
References:  <94c7120b0608181236j2475301ds1379510f94b12d34@mail.gmail.com> <09BFF2FA5EAB4A45B6655E151BBDD90301D42713@NT-IRVA-0750.brcm.ad.broadcom.com>

next in thread | previous in thread | raw e-mail | index | archive | help
David,

On 8/19/06, David Christensen <davidch@broadcom.com> wrote:
>
> > I tried to use a FE version of the switch (Cisco Catalyst
> > C3750), and a
> > single-port version of the said NIC, with the same results
> > (auto detect
> > fails, and can only live with intermittent forced 100baseTX
> > full-duplex).
>
> There isn't a single port version of the 5704, it must be a different
> controller (maybe the 5703?).  Which one is it exactly?

You are right: the single-port version is actually the 5703. Here's
the dmesg output for this particular one:-

pci5: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem 0xdcff0000-0xdc
ffffff irq 48 at device 1.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: Ethernet address: 00:10:18:16:43:d6

> Do either the
> LOM devices or the add-in boards support remote management (such as
> Serial-over-LAN or IPMI)?  If so does disabling the feature change the
> problem?

No idea on this one. Where do I usually disable this -- in the BIOS I presume?

> If you could attach a dump of dmesg that shows the messages from the
> driver that might help too.

Here's the dmesg for the dual-port version:-

pci5: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdcff0000-0xdcffffff irq 48 at device 1.0 on pci5
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:18:11:2a:0d
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xdcfe0000-0xdcfeffff irq 49 at device 1.1 on pci5
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:10:18:11:2a:0a

Thanks.
>
> > --mendonan
> > "Yang mimpikan secangkir kopi panas dengan selimut.."
> >  (Dreaming of a cup of hot coffee, and a blanket..")
> > _______________________________________________
> > freebsd-net@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-net
>  > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
> >
> >
>
>

-- 
--mendonan
"Yang mimpikan secangkir kopi panas dengan selimut.."
 (Dreaming of a cup of hot coffee, and a blanket..")



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?94c7120b0608210209o482fef7ev1b4922d0597af666>