Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 20 Mar 2004 02:34:53 -0600
From:      Barry Pederson <bp@barryp.org>
To:        hmchan@alumni.cuhk.edu.hk
Cc:        "stable@freebsd.org" <stable@freebsd.org>
Subject:   Re: ATI Radeon 9600 SE & OpenGL?
Message-ID:  <405C022D.60805@barryp.org>
In-Reply-To: <20040320124834.E11836@amd>
References:  <7670000.1079480581@palle.girgensohn.se> <13770000.1079537744@rambutan.pingpong.net> <33830000.1079712277@durian.pingpong.net> <405B2D7A.5050309@barryp.org><405BADFC.2020704@barryp.org> <20040320124834.E11836@amd>

next in thread | previous in thread | raw e-mail | index | archive | help
Spencer Chan wrote:
> Just to add some data point, i have
> 
> ~#pciconf -l -v|egrep agp\|drm
> agp0@pci0:0:0:  class=0x060000 card=0x00000000 chip=0x30991106 rev=0x00
> hdr=0x00
> drm0@pci1:0:0:  class=0x030000 card=0x017018bc chip=0x59641002 rev=0x01
> hdr=0x00
> ~#dmesg |grep drm
> drm0: <ATI Radeon RV280 9200 SE> port 0xa000-0xa0ff mem
> 0xe1000000-0xe100ffff,0xd0000000-0xd7ffffff irq 11 at device 0.0 on pci1
> info: [drm] AGP at 0xc0000000 256MB
> info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
> info: [drm] Loading R200 Microcode
> drm0: [MPSAFE]
> info: [drm] Loading R200 Microcode
> 
> My system is RELENG_5_2, with src/sys/dev/drm/radeon* updated to HEAD to
> recognize my card's PCI id. I am using XFree86 4.4 binaries.

Interesting, I don't get anything about microcode loading. My equivalent 
output is:

pciconf -l -v|egrep agp\|drm
------------
agp0@pci0:0:0:  class=0x060000 card=0x01621028 chip=0x25788086 rev=0x02
     hdr=0x00
drm0@pci1:0:0:  class=0x030000 card=0x7c13174b chip=0x59611002 rev=0x01
     hdr=0x00
------------


dmesg |grep drm
-----------
drm0: <ATI Radeon RV280 9200> port 0xde00-0xdeff mem
     0xfe9e0000-0xfe9effff,0xf0000000-0xf7ffffff irq 11
     at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
------------

This is on 5.2.1-RELEASE-p1, maybe going to HEAD would help.  I'd 
imagine you'd want the whole src/sys/dev/drm directory, and not just the 
radeon* files.  Although reading through the source of what I have now 
it's not obvious why the microcode loading doesn't apply to my card already.

	Barry



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?405C022D.60805>