Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 16 Aug 2004 18:52:48 +0200
From:      "Daniel Eriksson" <daniel_k_eriksson@telia.com>
To:        <freebsd-current@freebsd.org>
Cc:        =?iso-8859-1?Q?'S=F8ren_Schmidt'?= <sos@DeepCore.dk>
Subject:   Anything to worry about? (failed: rid 0x20 is memory, requested 4)
Message-ID:  <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAJt2zmKF34EezSdphTL3i8AEAAAAA@telia.com>

Next in thread | Raw E-Mail | Index | Archive | Help
This is a multi-part message in MIME format.

------=_NextPart_000_0000_01C483C2.3976FD50
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit


I just installed a Promise SATA150 TX4 in one of my servers. Everything
seems to work, but I get an error message during boot that worries me a bit:

atapci2: <Promise PDC20318 SATA150 controller> port
0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem
0xed000000-0xed01ffff,0xed800000-0xed800fff irq 19 at device 11.0 on pci0
atapci2: failed: rid 0x20 is memory, requested 4
atapci2: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xed000000
atapci2: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xed800000

This is with kernel/userland built from sources dated 2004.08.16.13.00.00
(earlier today). The machine has a bunch of PCI cards, and I'm worried that
maybe some important resource allocation fails that later will come around
and bite me.

Hardware:
ASUS A7V600-X motherboard (VIA KT-600 based) with latest BIOS (1005), Athlon
XP2500+, 1.25GB DDR
(onboard VIA 8237 UDMA133 controller)
(onboard VIA 6420 SATA150 controller)
(onboard VIA VT6102 Rhine II NIC)
(onboard VIA 83C572 USB controller)
Adaptec 29160
2 x Highpoint RocketRAID 454
Promise SATA150 TX4
Generic RealTek 8169-based NIC


Attached is the output from "boot -v".

/Daniel Eriksson

------=_NextPart_000_0000_01C483C2.3976FD50
Content-Type: text/plain;
	name="FORTIFY_bootv.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="FORTIFY_bootv.txt"

OK boot -v -s
/boot/kernel/acpi.ko text=3D0x467bc data=3D0x1cc4+0x110c =
syms=3D[0x4+0x6fa0+0x4+0x9311]
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009b800
SMAP type=3D02 base=3D000000000009b800 len=3D0000000000004800
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
SMAP type=3D01 base=3D0000000000100000 len=3D000000004fefb000
SMAP type=3D03 base=3D000000004fffb000 len=3D0000000000004000
SMAP type=3D04 base=3D000000004ffff000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffff0000 len=3D0000000000010000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights =
reserved.
FreeBSD 5.2-CURRENT #0: Mon Aug 16 16:46:50 CEST 2004
    daniel@xxx.xxx.xxx:/usr/obj/usr/src/sys/FORTIFY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ae000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08ae254.
Table 'FACP' at 0x4fffb0b2
Table 'BOOT' at 0x4fffb030
Table 'APIC' at 0x4fffb058
MADT: Found table at 0x4fffb058
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <ASUS   A7V600-X>
Calibrating clock(s) ... i8254 clock: 1193207 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1999783191 Hz
CPU: AMD Athlon(TM) XP 2500+ (1999.78-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x6a0  Stepping =3D 0
  =
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way =
associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way =
associative
real memory  =3D 1342156800 (1279 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000004e94afff, 1305628672 bytes (318757 pages)
avail memory =3D 1304936448 (1244 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f2000
bios32: Entry =3D 0xf1940 (c00f1940)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x1970
pnpbios: Found PnP BIOS data at 0xc00f9cb0
pnpbios: Entry =3D f0000:9ce0  Rev =3D 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V600-X> on motherboard
acpi0: [MPSAFE]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):   mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D31891106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00f1f20
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
slot 1      0   12    A   0x05  3 4 5 7 9 10 11 12
slot 1      0   12    B   0x01  3 4 5 7 9 10 11 12
slot 1      0   12    C   0x02  3 4 5 7 9 10 11 12
slot 1      0   12    D   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    A   0x01  3 4 5 7 9 10 11 12
slot 2      0   13    B   0x02  3 4 5 7 9 10 11 12
slot 2      0   13    C   0x03  3 4 5 7 9 10 11 12
slot 2      0   13    D   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    A   0x02  3 4 5 7 9 10 11 12
slot 3      0   14    B   0x03  3 4 5 7 9 10 11 12
slot 3      0   14    C   0x05  3 4 5 7 9 10 11 12
slot 3      0   14    D   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    A   0x03  3 4 5 7 9 10 11 12
slot 4      0   19    B   0x05  3 4 5 7 9 10 11 12
slot 4      0   19    C   0x01  3 4 5 7 9 10 11 12
slot 4      0   19    D   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    A   0x05  3 4 5 7 9 10 11 12
slot 5      0   11    B   0x01  3 4 5 7 9 10 11 12
slot 5      0   11    C   0x02  3 4 5 7 9 10 11 12
slot 5      0   11    D   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    A   0x01  3 4 5 7 9 10 11 12
slot 6      0   10    B   0x02  3 4 5 7 9 10 11 12
slot 6      0   10    C   0x03  3 4 5 7 9 10 11 12
slot 6      0   10    D   0x05  3 4 5 7 9 10 11 12
slot 7      1    0    A   0x01  3 4 5 7 9 10 11 12
slot 7      1    0    B   0x02  3 4 5 7 9 10 11 12
embedded    0   15    A   0x06  3 4 5 7 9 10 11 12
embedded    0   15    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    A   0x06  3 4 5 7 9 10 11 12
embedded    0   16    B   0x07  3 4 5 7 9 10 11 12
embedded    0   16    C   0x08  3 4 5 7 9 10 11 12
embedded    0   16    D   0x09  3 4 5 7 9 10 11 12
embedded    0   17    C   0x08  3 4 5 7 9 10 11 12
embedded    0   17    D   0x09  3 4 5 7 9 10 11 12
embedded    0   18    A   0x06  3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 18 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 16 func 5
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=3D0x1106, dev=3D0x3189, revid=3D0x80
        bus=3D0, slot=3D0, func=3D0
        class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
found-> vendor=3D0x1106, dev=3D0xb198, revid=3D0x00
        bus=3D0, slot=3D1, func=3D0
        class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 =
(0 ns)
        map[10]: type 4, range 32, base 0000d800, size  3, enabled
        map[14]: type 4, range 32, base 0000d400, size  2, enabled
        map[18]: type 4, range 32, base 0000d000, size  3, enabled
        map[1c]: type 4, range 32, base 0000b800, size  2, enabled
        map[20]: type 4, range 32, base 0000b400, size  8, enabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 16
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D16
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000b000, size  3, enabled
        map[14]: type 4, range 32, base 0000a800, size  2, enabled
        map[18]: type 4, range 32, base 0000a400, size  3, enabled
        map[1c]: type 4, range 32, base 0000a000, size  2, enabled
        map[20]: type 4, range 32, base 00009800, size  8, enabled
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 16
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D10, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D16
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00009400, size  6, enabled
        map[14]: type 4, range 32, base 00009000, size  4, enabled
        map[18]: type 4, range 32, base 00008800, size  7, enabled
        map[1c]: type 1, range 32, base ed800000, size 12, enabled
        map[20]: type 1, range 32, base ed000000, size 17, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 19
found-> vendor=3D0x105a, dev=3D0x3318, revid=3D0x02
        bus=3D0, slot=3D11, func=3D0
        class=3D01-80-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x0230, cachelnsz=3D144 (dwords)
        lattimer=3D0x60 (2880 ns), mingnt=3D0x04 (1000 ns), =
maxlat=3D0x12 (4500 ns)
        intpin=3Da, irq=3D19
        powerspec 2  supports D0 D1 D3  current D0
        map[10]: type 4, range 32, base 00008400, size  8, enabled
        map[14]: type 1, range 64, base ec800000, size 12, enabled
pcib0: matched entry for 0.12.INTA
pcib0: slot 12 INTA hardwired to IRQ 19
found-> vendor=3D0x9005, dev=3D0x0080, revid=3D0x02
        bus=3D0, slot=3D12, func=3D0
        class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x28 (10000 ns), =
maxlat=3D0x19 (6250 ns)
        intpin=3Da, irq=3D19
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00008000, size  3, enabled
        map[14]: type 4, range 32, base 00007800, size  2, enabled
        map[18]: type 4, range 32, base 00007400, size  3, enabled
        map[1c]: type 4, range 32, base 00007000, size  2, enabled
        map[20]: type 4, range 32, base 00006800, size  8, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 16
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D13, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D16
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00006400, size  3, enabled
        map[14]: type 4, range 32, base 00006000, size  2, enabled
        map[18]: type 4, range 32, base 00005800, size  3, enabled
        map[1c]: type 4, range 32, base 00005400, size  2, enabled
        map[20]: type 4, range 32, base 00005000, size  8, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 16
found-> vendor=3D0x1103, dev=3D0x0008, revid=3D0x07
        bus=3D0, slot=3D13, func=3D1
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D8 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), =
maxlat=3D0x08 (2000 ns)
        intpin=3Da, irq=3D16
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00004800, size  3, enabled
        map[14]: type 4, range 32, base 00004400, size  2, enabled
        map[18]: type 4, range 32, base 00004000, size  3, enabled
        map[1c]: type 4, range 32, base 00003800, size  2, enabled
        map[20]: type 4, range 32, base 00003400, size  4, enabled
        map[24]: type 4, range 32, base 00003000, size  8, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 20
found-> vendor=3D0x1106, dev=3D0x3149, revid=3D0x80
        bus=3D0, slot=3D15, func=3D0
        class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D20
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00002800, size  4, enabled
pcib0: matched entry for 0.15.INTA
pcib0: slot 15 INTA hardwired to IRQ 20
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
        bus=3D0, slot=3D15, func=3D1
        class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D20
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00002400, size  5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D0
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D21
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00002000, size  5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D1
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D21
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00001800, size  5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D2
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D21
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[20]: type 4, range 32, base 00001400, size  5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
        bus=3D0, slot=3D16, func=3D3
        class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Db, irq=3D21
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base ec000000, size  8, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86
        bus=3D0, slot=3D16, func=3D4
        class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Dc, irq=3D21
        powerspec 2  supports D0 D1 D2 D3  current D0
found-> vendor=3D0x1106, dev=3D0x3227, revid=3D0x00
        bus=3D0, slot=3D17, func=3D0
        class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
        cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        powerspec 2  supports D0 D3  current D0
        map[10]: type 4, range 32, base 00001000, size  8, enabled
        map[14]: type 1, range 32, base eb800000, size  8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=3D0x1106, dev=3D0x3065, revid=3D0x78
        bus=3D0, slot=3D18, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0097, statreg=3D0x0210, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 =
(2000 ns)
        intpin=3Da, irq=3D23
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 00000800, size  8, enabled
        map[14]: type 1, range 32, base eb000000, size  8, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=3D0x10ec, dev=3D0x8169, revid=3D0x10
        bus=3D0, slot=3D19, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0017, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
        lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 =
(16000 ns)
        intpin=3Da, irq=3D18
        powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem =
0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 240M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xdfff
pcib1:   memory decode     0xee000000-0xefdfffff
pcib1:   prefetched decode 0xeff00000-0xf7ffffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
        map[10]: type 1, range 32, base ee000000, size 24, enabled
pcib1: device (null) requested decoded memory range =
0xee000000-0xeeffffff
        map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range =
0xf0000000-0xf7ffffff
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=3D0x10de, dev=3D0x0150, revid=3D0xa3
        bus=3D1, slot=3D0, func=3D0
        class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
        lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), =
maxlat=3D0x01 (250 ns)
        intpin=3Da, irq=3D16
        powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 =
irq 16 at device 10.0 on pci0
atapci0: Reserved 0x100 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata2-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata3-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata3: [MPSAFE]
atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 =
irq 16 at device 10.1 on pci0
atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x9800
atapci1: [MPSAFE]
ata4: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa800
ata4: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata4-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata4: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata4: [MPSAFE]
ata5: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa400
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000
ata5: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata5-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata5: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata5: [MPSAFE]
atapci2: <Promise PDC20318 SATA150 controller> port =
0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem =
0xed000000-0xed01ffff,0xed800000-0xed800fff irq 19 at device 11.0 on =
pci0
atapci2: failed: rid 0x20 is memory, requested 4
atapci2: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xed000000
atapci2: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xed800000
atapci2: [MPSAFE]
ata6: channel #0 on atapci2
ata6: reset tp1 mask=3D03 ostat0=3D80 ostat1=3D80
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x80 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata6-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata6: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata6: [MPSAFE]
ata7: channel #1 on atapci2
ata7: reset tp1 mask=3D03 ostat0=3D80 ostat1=3D80
ata7-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata7: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata7: [MPSAFE]
ata8: channel #2 on atapci2
ata8: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8-slave:  stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata8: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata8: [MPSAFE]
ata9: channel #3 on atapci2
ata9: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-master: stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9-slave:  stat=3D0x7f err=3D0x00 lsb=3D0x00 msb=3D0x00
ata9: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata9: [MPSAFE]
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x8400-0x84ff mem =
0xec800000-0xec800fff irq 19 at device 12.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xec800000
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1def6, Bugs 0x40, Flags 0x20485560
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
atapci3: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port =
0x6800-0x68ff,0x7000-0x7003,0x7400-0x7407,0x7800-0x7803,0x8000-0x8007 =
irq 16 at device 13.0 on pci0
atapci3: Reserved 0x100 bytes for rid 0x20 type 4 at 0x6800
atapci3: [MPSAFE]
ata10: channel #0 on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8000
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0x7800
ata10: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata10-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata10-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata10: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata10: [MPSAFE]
ata11: channel #1 on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0x7400
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7000
ata11: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata11-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata11-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata11: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata11: [MPSAFE]
atapci4: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port =
0x5000-0x50ff,0x5400-0x5403,0x5800-0x5807,0x6000-0x6003,0x6400-0x6407 =
irq 16 at device 13.1 on pci0
atapci4: Reserved 0x100 bytes for rid 0x20 type 4 at 0x5000
atapci4: [MPSAFE]
ata12: channel #0 on atapci4
atapci4: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6400
atapci4: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6000
ata12: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata12-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata12-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata12: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata12: [MPSAFE]
ata13: channel #1 on atapci4
atapci4: Reserved 0x8 bytes for rid 0x18 type 4 at 0x5800
atapci4: Reserved 0x4 bytes for rid 0x1c type 4 at 0x5400
ata13: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata13-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata13-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata13: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata13: [MPSAFE]
atapci5: <VIA 6420 SATA150 controller> port =
0x3000-0x30ff,0x3400-0x340f,0x3800-0x3803,0x4000-0x4007,0x4400-0x4403,0x4=
800-0x4807 irq 20 at device 15.0 on pci0
atapci5: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3400
atapci5: [MPSAFE]
ata14: channel #0 on atapci5
atapci5: Reserved 0x8 bytes for rid 0x10 type 4 at 0x4800
atapci5: Reserved 0x4 bytes for rid 0x14 type 4 at 0x4400
ata14: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata14: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata14: [MPSAFE]
ata15: channel #1 on atapci5
atapci5: Reserved 0x8 bytes for rid 0x18 type 4 at 0x4000
atapci5: Reserved 0x4 bytes for rid 0x1c type 4 at 0x3800
ata15: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata15: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata15: [MPSAFE]
atapci6: <VIA 8237 UDMA133 controller> port =
0x2800-0x280f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 20 at device 15.1 =
on pci0
atapci6: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2800
ata0: channel #0 on atapci6
atapci6: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci6: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci6
atapci6: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci6: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata1-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 stat0=3D50 stat1=3D50 =
devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0x2400-0x241f irq 21 at device =
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x2000-0x201f irq 21 at device =
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x1800-0x181f irq 21 at device =
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x1400-0x141f irq 21 at device =
16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xec000000-0xec0000ff irq 21 =
at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xec000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1000-0x10ff mem =
0xeb800000-0xeb8000ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0e:a6:1f:29:1e
vr0: [GIANT-LOCKED]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x800
re0: <RealTek 8110S Single-chip Gigabit Ethernet> port 0x800-0x8ff mem =
0xeb000000-0xeb0000ff irq 18 at device 19.0 on pci0
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, =
1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:50:fc:f8:c6:81
re0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on =
acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc041 0xc041 0xc041 0xc041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc041 0xc041 0xc041 0xc041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1999783191 Hz quality 800
Timecounters tick every 1.000 msec
DUMMYNET initialized (011031)
ipfw2 initialized, divert enabled, rule-based forwarding enabled, =
default to accept, logging unlimited
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata0-master: setting PIO4 on VIA 8237 chip
ata0-master: setting UDMA100 on VIA 8237 chip
ata0-slave: setting PIO4 on VIA 8237 chip
ata0-slave: setting UDMA100 on VIA 8237 chip
ad0: <ST3120022A/3.06> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 120031478784 end 120031511039
ad1: <ST3120022A/3.06> ATA-6 disk at ata0-slave
ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
GEOM: Configure ad0s1a, start 0 length 536870912 end 536870911
GEOM: Configure ad0s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad0s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad0s1d, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad0s1e, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad0s1f, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad0s1g, start 12884901888 length 107146576896 end =
120031478783
GEOM: new disk ad1
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata1-master: setting PIO4 on VIA 8237 chip
ata1-master: setting UDMA100 on VIA 8237 chip
ata1-slave: setting PIO4 on VIA 8237 chip
ata1-slave: setting UDMA100 on VIA 8237 chip
ad2: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-master
ad2: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ad3: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata1-slave
ad3: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad3: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata2-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039
ata2-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
GEOM: new disk ad2
GEOM: new disk ad3
ata2-master: setting PIO4 on HighPoint chip
GEOM: Configure ad1s1b, start 536870912 length 536870912 end 1073741823
GEOM: Configure ad1s1c, start 0 length 120031478784 end 120031478783
GEOM: Configure ad1s1d, start 0 length 536870912 end 536870911
GEOM: Configure ad1s1e, start 1073741824 length 536870912 end 1610612735
GEOM: Configure ad1s1f, start 1610612736 length 536870912 end 2147483647
GEOM: Configure ad1s1g, start 2147483648 length 10737418240 end =
12884901887
GEOM: Configure ad1s1h, start 12884901888 length 107146576896 end =
120031478783
ata2-master: setting UDMA100 on HighPoint chip
ata2-slave: setting PIO4 on HighPoint chip
ata2-slave: setting UDMA100 on HighPoint chip
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 123518997504 end 123519029759
ad4: <WDC WD2500JB-00FUA0/15.05R15> ATA-6 disk at ata2-master
ad4: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad3s1, start 32256 length 123518997504 end 123519029759
ad5: <WDC WD2500JB-00FUA0/15.05R15> ATA-6 disk at ata2-slave
ad5: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B
ad5: 16 secs/int, 1 depth queue, UDMA100
ata3-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata3-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata3-master: setting PIO4 on HighPoint chip
ata3-master: setting UDMA133 on HighPoint chip
ata3-slave: setting PIO4 on HighPoint chip
ata3-slave: setting UDMA133 on HighPoint chip
ad6: <Maxtor 4A250J0/RAMB1TU0> ATA-7 disk at ata3-master
ad6: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA133
GEOM: Configure ad2s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad2s1e, start 0 length 123518997504 end 123518997503
GEOM: new disk ad4
GEOM: Configure ad3s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad3s1e, start 0 length 123518997504 end 123518997503
GEOM: new disk ad5
GEOM: new disk ad6
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:976784067
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 500113442304 end 500113474559
ad7: <Maxtor 5A250J0/RAMB1TV0> ATA-7 disk at ata3-slave
ad7: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad7: 16 secs/int, 1 depth queue, UDMA133
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:488392002
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad5s1, start 32256 length 250056705024 end 250056737279
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:980462952
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 501997031424 end 501997063679
ata4-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
GEOM: Configure ad4s1c, start 0 length 500113442304 end 500113442303
GEOM: Configure ad4s1d, start 0 length 500113442304 end 500113442303
GEOM: new disk ad7
ata4-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata4-master: setting PIO4 on HighPoint chip
ata4-master: setting UDMA133 on HighPoint chip
GEOM: Configure ad6s1c, start 0 length 501997031424 end 501997031423
GEOM: Configure ad6s1d, start 0 length 501997031424 end 501997031423
ata4-slave: setting PIO4 on HighPoint chip
ata4-slave: setting UDMA133 on HighPoint chip
ad8: <Maxtor 6Y200P0/YAR41BW0> ATA-7 disk at ata4-master
ad8: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B
ad8: 16 secs/int, 1 depth queue, UDMA133
GEOM: new disk ad8
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:398283417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad8s1, start 32256 length 203921109504 end 203921141759
ad9: <Maxtor 6Y200P0/YAR41VW0> ATA-7 disk at ata4-slave
ad9: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B
ad9: 16 secs/int, 1 depth queue, UDMA133
GEOM: Configure ad8s1c, start 0 length 203921109504 end 203921109503
GEOM: Configure ad8s1d, start 0 length 203921109504 end 203921109503
GEOM: new disk ad9
ata5-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata5-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:796582962
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad9s1, start 32256 length 407850476544 end 407850508799
ata5-master: setting PIO4 on HighPoint chip
ata5-master: setting UDMA133 on HighPoint chip
ata5-slave: setting PIO4 on HighPoint chip
ata5-slave: setting UDMA133 on HighPoint chip
GEOM: Configure ad9s1c, start 0 length 407850476544 end 407850476543
GEOM: Configure ad9s1d, start 0 length 407850476544 end 407850476543
ad10: <Maxtor 6Y200P0/YAR41BW0> ATA-7 disk at ata5-master
ad10: 194481MB (398297088 sectors), 395136 C, 16 H, 63 S, 512 B
ad10: 16 secs/int, 1 depth queue, UDMA133
GEOM: new disk ad10
ar: HighPoint check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/7/63 s:63 l:398283417
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad10s1, start 32256 length 203921109504 end 203921141759
ad11: <Maxtor 7Y250P0/YAR41BW0> ATA-7 disk at ata5-slave
ad11: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad11: 16 secs/int, 1 depth queue, UDMA133
ar: HighPoint check1 failed
GEOM: Configure ad10s1c, start 0 length 203921109504 end 203921109503
GEOM: Configure ad10s1d, start 0 length 203921109504 end 203921109503
GEOM: new disk ad11
ata6-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D40pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad11s1, start 32256 length 250994386944 end 250994419199
ad12: <Maxtor 7Y250M0/YAR51EW0> ATA-7 disk at ata6-master
ad12: 239372MB (490234752 sectors), 486344 C, 16 H, 63 S, 512 B
ad12: 16 secs/int, 1 depth queue, UDMA133
GEOM: Configure ad11s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad11s1d, start 0 length 250994386944 end 250994386943
GEOM: new disk ad12
ar: Promise check1 failed
ata7-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ad14: <WDC WD2500JD-00FYB0/02.05D02> ATA-6 disk at ata7-master
ad14: 238475MB (488397168 sectors), 484521 C, 16 H, 63 S, 512 B
ad14: 16 secs/int, 1 depth queue, UDMA100
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:490223412
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad12s1, start 32256 length 250994386944 end 250994419199
ar: Promise check1 failed
GEOM: new disk ad14
ata10-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
GEOM: Configure ad12s1c, start 0 length 250994386944 end 250994386943
GEOM: Configure ad12s1d, start 0 length 250994386944 end 250994386943
ata10-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata10-master: setting PIO4 on HighPoint chip
ata10-master: setting UDMA100 on HighPoint chip
ata10-slave: setting PIO4 on HighPoint chip
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:488392002
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad14s1, start 32256 length 250056705024 end 250056737279
ata10-slave: setting UDMA100 on HighPoint chip
GEOM: Configure ad14a, start 8192 length 500118627328 end 500118635519
GEOM: Configure ad14c, start 0 length 500118635520 end 500118635519
GEOM: Configure ad14s1c, start 0 length 250056705024 end 250056705023
GEOM: Configure ad14s1d, start 0 length 250056705024 end 250056705023
ad20: <IC35L120AVV207-0/V24OA66A> ATA-6 disk at ata10-master
ad20: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad20: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad20
ar: HighPoint check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad20s1, start 32256 length 123518997504 end 123519029759
ad21: <HDS722512VLAT20/V33OA60A> ATA-6 disk at ata10-slave
ad21: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad21: 16 secs/int, 1 depth queue, UDMA100
ar: HighPoint check1 failed
GEOM: Configure ad20s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad20s1e, start 0 length 123518997504 end 123518997503
GEOM: new disk ad21
ata11-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad21s1, start 32256 length 123518997504 end 123519029759
ata11-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata11-master: setting PIO4 on HighPoint chip
ata11-master: setting UDMA133 on HighPoint chip
GEOM: Configure ad21s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad21s1e, start 0 length 123518997504 end 123518997503
ata11-slave: setting PIO4 on HighPoint chip
ata11-slave: setting UDMA133 on HighPoint chip
ad22: <Maxtor 6Y120L0/YAR41BW0> ATA-7 disk at ata11-master
ad22: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad22: 16 secs/int, 1 depth queue, UDMA133
GEOM: new disk ad22
ar: HighPoint check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:240107427
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad22s1, start 32256 length 122935002624 end 122935034879
ad23: <Maxtor 6Y120L0/YAR41BW0> ATA-7 disk at ata11-slave
ad23: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad23: 16 secs/int, 1 depth queue, UDMA133
GEOM: Configure ad22s1c, start 0 length 122935002624 end 122935002623
GEOM: Configure ad22s1e, start 0 length 122935002624 end 122935002623
GEOM: new disk ad23
ata12-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:468873027
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad23s1, start 32256 length 240062989824 end 240063022079
ata12-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
GEOM: Configure ad23s1c, start 0 length 240062989824 end 240062989823
GEOM: Configure ad23s1d, start 0 length 240062989824 end 240062989823
ata12-master: setting PIO4 on HighPoint chip
ata12-master: setting UDMA100 on HighPoint chip
ata12-slave: setting PIO4 on HighPoint chip
ata12-slave: setting UDMA100 on HighPoint chip
ad24: <WDC WD1200JB-00DUA3/75.13B75> ATA-6 disk at ata12-master
ad24: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad24: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad24
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad24s1, start 32256 length 120031478784 end 120031511039
ad25: <IC35L120AVV207-1/V24OA66A> ATA-6 disk at ata12-slave
ad25: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B
ad25: 16 secs/int, 1 depth queue, UDMA100
ar: HighPoint check1 failed
GEOM: new disk ad25
ata13-master: pio=3D0x0c wdma=3D0x22 udma=3D0x44 cable=3D80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:241248042
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad25s1, start 32256 length 123518997504 end 123519029759
ata13-master: setting PIO4 on HighPoint chip
ata13-master: setting UDMA66 on HighPoint chip
GEOM: Configure ad25s1c, start 0 length 123518997504 end 123518997503
GEOM: Configure ad25s1d, start 0 length 123518997504 end 123518997503
ad26: <Maxtor 92732U8/RA530JN0> ATA-5 disk at ata13-master
ad26: 26059MB (53369568 sectors), 52946 C, 16 H, 63 S, 512 B
ad26: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad26
ar: HighPoint check1 failed
lun             0
magic_0         0x411cf9f2
magic_1         0x00000000
flags           0x40102 40102<READY,RAID1>
total_disks 2
generation      0
width           2
heads           255
sectors         63
cylinders       60802
total_sectors   976794336
interleave      128
reserved        10
offset          10
disk 0: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad4
        sectors 488397168
disk 1: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad5
        sectors 488397168
ar0: 476950MB <ATA RAID0 array> [60802/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad5 at ata2-slave
lun             1
magic_0         0x4100e31f
magic_1         0x00000000
flags           0x40102 40102<READY,RAID1>
total_disks 2
generation      0
width           2
heads           255
sectors         63
cylinders       61031
total_sectors   980469504
interleave      128
reserved        10
offset          10
disk 0: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad6
        sectors 490234752
disk 1: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad7
        sectors 490234752
ar1: 478744MB <ATA RAID0 array> [61031/255/63] status: READY subdisks:
 disk0 READY on ad6 at ata3-master
 disk1 READY on ad7 at ata3-slave
lun             2
magic_0         0x4100e40c
magic_1         0x00000000
flags           0x40102 40102<READY,RAID1>
total_disks 2
generation      0
width           2
heads           255
sectors         63
cylinders       49585
total_sectors   796594176
interleave      128
reserved        10
offset          10
disk 0: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad9
        sectors 398297088
disk 1: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad8
        sectors 398297088
ar2: 388962MB <ATA RAID0 array> [49585/255/63] status: READY subdisks:
 disk0 READY on ad9 at ata4-slave
 disk1 READY on ad8 at ata4-master
lun             3
magic_0         0x4100e468
magic_1         0x00000000
flags           0x40102 40102<READY,RAID1>
total_disks 2
generation      0
width           2
heads           255
sectors         63
cylinders       29186
total_sectors   468883296
interleave      128
reserved        10
offset          10
disk 0: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad23
        sectors 234441648
disk 1: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
        ad24
        sectors 234441648
ar3: 228946MB <ATA RAID0 array> [29186/255/63] status: READY subdisks:
 disk0 READY on ad23 at ata11-slave
 disk1 READY on ad24 at ata12-master
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:53367867
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad26s1, start 32256 length 27324347904 end 27324380159
GEOM: new disk ar0
GEOM: new disk ar1
GEOM: new disk ar2
GEOM: new disk ar3
GEOM: Configure ad26s1c, start 0 length 27324347904 end 27324347903
GEOM: Configure ad26s1d, start 0 length 27324347904 end 27324347903
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:976784067
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar0s1, start 32256 length 500113442304 end 500113474559
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:980462952
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar1s1, start 32256 length 501997031424 end 501997063679
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:796582962
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar2s1, start 32256 length 407850476544 end 407850508799
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:468873027
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ar3s1, start 32256 length 240062989824 end 240063022079
GEOM: Configure ar0s1c, start 0 length 500113442304 end 500113442303
GEOM: Configure ar0s1d, start 0 length 500113442304 end 500113442303
GEOM: Configure ar1s1c, start 0 length 501997031424 end 501997031423
GEOM: Configure ar1s1d, start 0 length 501997031424 end 501997031423
GEOM: Configure ar2s1c, start 0 length 407850476544 end 407850476543
GEOM: Configure ar2s1d, start 0 length 407850476544 end 407850476543
GEOM: Configure ar3s1c, start 0 length 240062989824 end 240062989823
GEOM: Configure ar3s1d, start 0 length 240062989824 end 240062989823
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:15. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
(ahc0:A:5:0): Sending SDTR period c, offset 7f
(ahc0:A:5:0): Received SDTR period 19, offset f
        Filtered to period 19, offset f
ahc0: target 5 synchronous at 10.0MHz, offset =3D 0xf
(probe11:ahc0:0:12:0): Retrying Command
(ahc0:A:5:0): Sending SDTR period 19, offset f
(probe12:ahc0:0:13:0): Retrying Command
(probe9:ahc0:0:10:0): Retrying Command
(probe10:ahc0:0:11:0): Retrying Command
(ahc0:A:5:0): Received SDTR period 19, offset f
        Filtered to period 19, offset f
(ahc0:A:12:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options =
2
(ahc0:A:12:0): Received PPR width 1, period 9, offset 3f,options 2
        Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 12 using 16bit transfers
ahc0: target 12 synchronous at 80.0MHz DT, offset =3D 0x3f
(ahc0:A:13:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options =
2
(ahc0:A:13:0): Received PPR width 1, period 9, offset 3f,options 2
        Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 13 using 16bit transfers
ahc0: target 13 synchronous at 80.0MHz DT, offset =3D 0x3f
(ahc0:A:10:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options =
2
(ahc0:A:10:0): Received PPR width 1, period 9, offset 3f,options 2
        Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 10 using 16bit transfers
ahc0: target 10 synchronous at 80.0MHz DT, offset =3D 0x3f
(ahc0:A:11:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options =
2
(ahc0:A:11:0): Received PPR width 1, period 9, offset 3f,options 2
        Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 11 using 16bit transfers
ahc0: target 11 synchronous at 80.0MHz DT, offset =3D 0x3f
pass0 at ahc0 bus 0 target 5 lun 0
pass0: <Seagate STT20000N 6A51> Removable Sequential Access SCSI-2 =
device=20
pass0: Serial Number=20
pass0: 10.000MB/s transfers (10.000MHz, offset 15)
pass1 at ahc0 bus 0 target 10 lun 0
pass1: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
pass1: Serial Number         TFF8Y198
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
pass2 at ahc0 bus 0 target 11 lun 0
pass2: <IBM IC35L036UWD210-0 S5CQ> Fixed Direct Access SCSI-3 device=20
pass2: Serial Number         VM9B1477
pass2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
pass3 at ahc0 bus 0 target 12 lun 0
pass3: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
pass3: Serial Number         TFF8X930
pass3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
pass4 at ahc0 bus 0 target 13 lun 0
pass4: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
pass4: Serial Number         VFLA9712
pass4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Seagate STT20000N 6A51> Removable Sequential Access SCSI-2 device=20
sa0: Serial Number=20
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc0 bus 0 target 10 lun 0
da0: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
da0: Serial Number         TFF8Y198
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da1 at ahc0 bus 0 target 11 lun 0
da1: <IBM IC35L036UWD210-0 S5CQ> Fixed Direct Access SCSI-3 device=20
da1: Serial Number         VM9B1477
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da2 at ahc0 bus 0 target 12 lun 0
da2: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
da2: Serial Number         TFF8X930
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahc0 bus 0 target 13 lun 0
da3: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device=20
da3: Serial Number         VFLA9712
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged =
Queueing Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 2 (ISA IRQ 0) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 36701167104 end 36701199359
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da1s1, start 32256 length 36701167104 end 36701199359
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da2s1, start 32256 length 36701167104 end 36701199359
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71681967
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da3s1, start 32256 length 36701167104 end 36701199359
GEOM: Configure da0s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da0s1d, start 0 length 36701167104 end 36701167103
GEOM: Configure da1s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da1s1d, start 0 length 36701167104 end 36701167103
GEOM: Configure da2s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da2s1d, start 0 length 36701167104 end 36701167103
GEOM: Configure da3s1c, start 0 length 36701167104 end 36701167103
GEOM: Configure da3s1d, start 0 length 36701167104 end 36701167103
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Enter full pathname of shell or RETURN for /bin/sh:=20

------=_NextPart_000_0000_01C483C2.3976FD50--




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA0VcX9IoJqUaXPS8MjT1PdsKAAAAQAAAAJt2zmKF34EezSdphTL3i8AEAAAAA>