Date: Wed, 19 Jun 2002 01:21:19 -0700 (PDT) From: WATANABE Yuichi <yuu-w@ascii.co.jp> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/39499: sysinstall panic with ATAPI CD-ROM Message-ID: <200206190821.g5J8LJVN027693@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 39499
>Category: kern
>Synopsis: sysinstall panic with ATAPI CD-ROM
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jun 19 01:30:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: WATANABE Yuichi
>Release: FreeBSD 4.6R
>Organization:
ASCII Corp.
>Environment:
FreeBSD oapc13.oa.ascii.co.jp 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Wed Jun 19 14:35:17 JST 2002
root@oapc13.oa.ascii.co.jp:/usr/src/sys/compile/PRTSVR00 i386
>Description:
I used /stand/sysinstall, and choosed package install from CD-ROM,
then the system panic happened.
console message is below.
acd0: READ_BIG command timeout - resetting
acd0: removed from configuration
done
Fatal trap 12: page fault wile in kernel mode
fault virtual address = 0x1c
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0220503
stack pointer = 0x10: 0xccca5d2c
frame pointer = 0x10: 0xccca5d3c
code segment = base 0x0, limit 0xfffff, type 0x1b,
= DPL 0, pres 1, def32 1, gran 1
processor eflag = interrupt enabled, resume, IOPL = 0
current process = 163(sysinstall)
interrupt mask = none
trap number = 12
panic: page fault
syncing disks... 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
give up on 1 buffers
----------------------------------------------
dmesg is blow.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Wed Jun 19 14:35:17 JST 2002
root@oapc13.oa.ascii.co.jp:/usr/src/sys/compile/PRTSVR00
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1817.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 268369920 (262080K bytes)
avail memory = 256339968 (250332K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xef000000-0xef0000ff irq 10 at device 3.0 on pci2
rl0: Ethernet address: 00:50:fc:51:37:68
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0xc400-0xc4ff mem 0xef002000-0xef002fff,0xef001000-0xef0010ff irq 11 at device 4.0 on pci2
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
pci2: <unknown card> (vendor=0x1274, dev=0x5880) at 10.0 irq 5
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 11
at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 11
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 9
at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd27ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19092MB <WDC WD200BB-00CLB0> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <CD-ROM 52X/AKH> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
>How-To-Repeat:
>Fix:
there is no problem on SCSI-CD-ROM.
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200206190821.g5J8LJVN027693>