Date: Wed, 12 Jan 2000 08:02:51 -0500 (EST) From: Bill/Carolyn Pechter <pechter@shell.monmouth.com> To: freebsd-current@freebsd.org Subject: Wired down SCSI devices problem Message-ID: <200001121302.IAA14000@shell.monmouth.com>
next in thread | raw e-mail | index | archive | help
Folks, I've run into the following problem since about 1/6 or so: Have I missed something obvious, do I need the conical hat here? If so I've got a stool in the corner to sit on. The wired scsi devices no longer configure as such... I'm sure it must be me, since I've seen no messages in -current on this one. The UPDATING file didn't mention anything as well. I've been running -current on this machine since about last March and doing buildworlds every week or two. (And every day or two when work's slow.) I just did another last night. On the old configuration (only thing changed in new configuration is swap of controller key word with device key word...) disks on ncr1 (scbus0) were mapped as da0->5 and disks on ncr0 (scbus1) da10 was to be da10->13. (this gives a name of da[controller#][drive#][slice#][partition#] which is pretty close to the naming convention I used to admin on Pyramid OS/x. Now the drive on ncr1 went from da0 to da7 (which is an unused non-wired floater) and the drive on ncr0 went to da6 (another floater). I attache the relevent parts of the configuration file. I didn't see anything obvious in LINT on this and I tried both the ncr and sym drivers... Old configuration # SCSI DEVICES controller ncr0 controller ncr1 controller scbus0 at ncr1 controller scbus1 at ncr0 # DISK device da0 at scbus0 target 0 # SCSI disk device da1 at scbus0 target 1 # SCSI disk device da2 at scbus0 target 2 # SCSI disk device da3 at scbus0 target 3 # SCSI disk device da4 at scbus0 target 4 # SCSI disk device da5 at scbus0 target 5 # SCSI disk device cd0 at scbus0 target 6 #SCSI cdrom # TAPE device da10 at scbus1 target 0 # SCSI disk device da11 at scbus1 target 1 # SCSI disk device da12 at scbus1 target 2 # SCSI disk device da13 at scbus1 target 3 # SCSI disk device sa0 at scbus1 target 4 device sa1 at scbus1 target 5 unit 0 device ch0 at scbus1 target 5 unit 1 # CDROM device cd10 at scbus1 target 6 #SCSI cdrom device pass0 #CAM passthrough driver New configuration: # SCSI DEVICES device ncr0 device ncr1 device scbus0 at ncr1 device scbus1 at ncr0 options SCSI_NCR_MYADDR=7 # DISK device da0 at scbus0 target 0 # SCSI disk device da1 at scbus0 target 1 # SCSI disk device da2 at scbus0 target 2 # SCSI disk device da3 at scbus0 target 3 # SCSI disk device da4 at scbus0 target 4 # SCSI disk device da5 at scbus0 target 5 # SCSI disk device cd0 at scbus0 target 6 #SCSI cdrom # TAPE device da10 at scbus1 target 0 # SCSI disk device da11 at scbus1 target 1 # SCSI disk device da12 at scbus1 target 2 # SCSI disk device da13 at scbus1 target 3 # SCSI disk device sa0 at scbus1 target 4 device sa1 at scbus1 target 5 unit 0 device ch0 at scbus1 target 5 unit 1 # CDROM device cd10 at scbus1 target 6 #SCSI cdrom device pass0 #CAM passthrough driver Thanks again, Bill +---------------------------------------------------------------------------+ | Bill and/or Carolyn Pechter | pechter@shell.monmouth.com | | Bill Gates is a Persian cat and a monocle away from being a villain in | | a James Bond movie -- Dennis Miller | +---------------------------------------------------------------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001121302.IAA14000>