Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 9 Sep 2000 12:42:27 -0500
From:      "Daryl Chance" <dchance@valuedata.net>
To:        "Soren Schmidt" <sos@freebsd.dk>
Cc:        "FreeBSD Hackers" <hackers@FreeBSD.ORG>
Subject:   Re: Smart And Friendly Burner?
Message-ID:  <009d01c01a85$52838f20$0200000a@mike>
References:  <200011131821.TAA35683@freebsd.dk>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.

------=_NextPart_000_009A_01C01A5B.6905AE60
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 8bit

I burned the copy from the 4.2RC1 iso found on the ftp site.  doing a list
on / shows the kernel was compiled on Nov 7th.  When I recompiled the kernel
(not adding, just commenting stuff out) It showed the message that
looked fine. (/kernel: acd1: CD-RW <SAF CD-RW4424A> at ata1-slave using
WDMA2)
The first message I got with the default kernel.

I went ahead and attached my config file.

HTH,
-----------------------------------------------------------------------
| Daryl Chance   | We start seeing these new accounts being created,  |
| -------------- | but that could be an anomaly of the system.  After |
| Valuedata, LLC | a day or two, we realized it was someone hacking   |
| Memphis, TN    | into the system.      - Microsoft on thier hacker  |
-----------------------------------------------------------------------
----- Original Message -----
From: "Soren Schmidt" <sos@freebsd.dk>
To: "Daryl Chance" <dchance@valuedata.net>
Cc: "FreeBSD Hackers" <hackers@FreeBSD.ORG>
Sent: Monday, November 13, 2000 1:21 PM
Subject: Re: Smart And Friendly Burner?


> It seems Daryl Chance wrote:
> > Hi,
> >
> > Anyone else have a smart and friendly cd burner?  When I boot I get
this:
> >
> > /kernel: acd0: CDROM <ATAPI CD ROM DRIVE 50X MAX> at ata1-master using
> > UDMA33
> > /kernel: ata1-slave: timeout waiting for command=ef s=00 e=00
> > /kernel: ata1-slave: timeout waiting for command=ef s=00 e=00
> > /kernel: ata1-slave: <SAF CD-RW4424A/1.09> CDROM device -NO DRIVER!
> >
> > I'm running 4.2 RC1 (the iso out on the ftp site).  I've since
recompiled
> > the kernel (commenting out a lot of things) and I get this now:
> >
> > /kernel: acd1: CD-RW <SAF CD-RW4424A> at ata1-slave using WDMA2
> >
> > So it looks fine now.  I haven't added to the kernel, just removed
stuff.
> > If needed, I could send the conf file.
>
> You dont mention what version on FreeBSD we are talking about here, in
> any case you should upgrade to the latest version on the branch you
> are on...
>
> What exactly have you removed ?
>
> -Søren
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
>

------=_NextPart_000_009A_01C01A5B.6905AE60
Content-Type: application/octet-stream;
	name="chancedj"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="chancedj"

#=0A=
# GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A=
#=0A=
# For more information on this file, please read the handbook section on=0A=
# Kernel Configuration Files:=0A=
#=0A=
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html=0A=
#=0A=
# The handbook is also available locally in /usr/share/doc/handbook=0A=
# if you've installed the doc distribution, otherwise always see the=0A=
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A=
# latest information.=0A=
#=0A=
# An exhaustive list of options and more detailed explanations of the=0A=
# device lines is also present in the ./LINT configuration file. If you =
are=0A=
# in doubt as to the purpose or necessity of a line, check first in LINT.=0A=
#=0A=
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 =
n_hibma Exp $=0A=
=0A=
machine		i386=0A=
#cpu		I386_CPU=0A=
#cpu		I486_CPU=0A=
#cpu		I586_CPU=0A=
cpu		I686_CPU=0A=
ident		GENERIC=0A=
maxusers	32=0A=
=0A=
#makeoptions	DEBUG=3D-g		#Build kernel with gdb(1) debug symbols=0A=
=0A=
options 	MATH_EMULATE		#Support for x87 emulation=0A=
options 	INET			#InterNETworking=0A=
#options 	INET6			#IPv6 communications protocols=0A=
options 	FFS			#Berkeley Fast Filesystem=0A=
options 	FFS_ROOT		#FFS usable as root device [keep this!]=0A=
options 	SOFTUPDATES		#Enable FFS soft updates support=0A=
#options 	MFS			#Memory Filesystem=0A=
#options 	MD_ROOT			#MD is a potential root device=0A=
#options 	NFS			#Network Filesystem=0A=
#options 	NFS_ROOT		#NFS usable as root device, NFS required=0A=
#options 	MSDOSFS			#MSDOS Filesystem=0A=
options 	CD9660			#ISO 9660 Filesystem=0A=
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required=0A=
options 	PROCFS			#Process filesystem=0A=
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]=0A=
#options 	SCSI_DELAY=3D15000	#Delay (in ms) before probing SCSI=0A=
#options 	UCONSOLE		#Allow users to grab the console=0A=
#options 	USERCONFIG		#boot -c editor=0A=
#options 	VISUAL_USERCONFIG	#visual boot -c editor=0A=
#options 	KTRACE			#ktrace(1) support=0A=
options 	SYSVSHM			#SYSV-style shared memory=0A=
options 	SYSVMSG			#SYSV-style message queues=0A=
options 	SYSVSEM			#SYSV-style semaphores=0A=
options 	P1003_1B		#Posix P1003_1B real-time extensions=0A=
options 	_KPOSIX_PRIORITY_SCHEDULING=0A=
options		ICMP_BANDLIM		#Rate limit bad replies=0A=
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev=0A=
=0A=
# To make an SMP kernel, the next two are needed=0A=
#options 	SMP			# Symmetric MultiProcessor Kernel=0A=
#options 	APIC_IO			# Symmetric (APIC) I/O=0A=
=0A=
device		isa=0A=
device		eisa=0A=
device		pci=0A=
=0A=
# Floppy drives=0A=
device		fdc0	at isa? port IO_FD1 irq 6 drq 2=0A=
device		fd0	at fdc0 drive 0=0A=
device		fd1	at fdc0 drive 1=0A=
=0A=
# ATA and ATAPI devices=0A=
#device		ata0	at isa? port IO_WD1 irq 14=0A=
#device		ata1	at isa? port IO_WD2 irq 15=0A=
device		ata=0A=
device		atadisk			# ATA disk drives=0A=
device		atapicd			# ATAPI CDROM drives=0A=
#device		atapifd			# ATAPI floppy drives=0A=
#device		atapist			# ATAPI tape drives=0A=
options 	ATA_STATIC_ID		#Static device numbering=0A=
options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices=0A=
=0A=
# SCSI Controllers=0A=
#device		ahb		# EISA AHA1742 family=0A=
#device		ahc		# AHA2940 and onboard AIC7xxx devices=0A=
#device		amd		# AMD 53C974 (Teckram DC-390(T))=0A=
#device		isp		# Qlogic family=0A=
#device		ncr		# NCR/Symbios Logic=0A=
#device		sym		# NCR/Symbios Logic (newer chipsets)=0A=
#options		SYM_SETUP_LP_PROBE_MAP=3D0x40=0A=
				# Allow ncr to attach legacy NCR devices when=0A=
				# both sym and ncr are configured=0A=
=0A=
#device		adv0	at isa?=0A=
#device		adw=0A=
#device		bt0	at isa?=0A=
#device		aha0	at isa?=0A=
#device		aic0	at isa?=0A=
=0A=
#device		ncv		# NCR 53C500=0A=
#device		nsp		# Workbit Ninja SCSI-3=0A=
#device		stg		# TMC 18C30/18C50=0A=
=0A=
# SCSI peripherals=0A=
#device		scbus		# SCSI bus (required)=0A=
#device		da		# Direct Access (disks)=0A=
#device		sa		# Sequential Access (tape etc)=0A=
#device		cd		# CD=0A=
#device		pass		# Passthrough device (direct SCSI access)=0A=
=0A=
# RAID controllers interfaced to the SCSI subsystem=0A=
#device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID=0A=
#device		dpt		# DPT Smartcache - See LINT for options!=0A=
#device		mly		# Mylex AcceleRAID/eXtremeRAID=0A=
=0A=
# RAID controllers=0A=
#device		ida		# Compaq Smart RAID=0A=
#device		amr		# AMI MegaRAID=0A=
#device		mlx		# Mylex DAC960 family=0A=
#device		twe		# 3ware Escalade=0A=
=0A=
# atkbdc0 controls both the keyboard and the PS/2 mouse=0A=
device		atkbdc0	at isa? port IO_KBD=0A=
device		atkbd0	at atkbdc? irq 1 flags 0x1=0A=
device		psm0	at atkbdc? irq 12=0A=
=0A=
device		vga0	at isa?=0A=
=0A=
# splash screen/screen saver=0A=
pseudo-device	splash=0A=
=0A=
# syscons is the default console driver, resembling an SCO console=0A=
device		sc0	at isa? flags 0x100=0A=
=0A=
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A=
#device		vt0	at isa?=0A=
#options 	XSERVER			# support for X server on a vt console=0A=
#options 	FAT_CURSOR		# start with block cursor=0A=
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT =
lines=0A=
#options 	PCVT_SCANSET=3D2		# IBM keyboards are non-std=0A=
=0A=
# Floating point support - do not disable.=0A=
device		npx0	at nexus? port IO_NPX irq 13=0A=
=0A=
# Power management support (see LINT for more options)=0A=
device		apm0    at nexus? disable flags 0x20 # Advanced Power Management=0A=
=0A=
# PCCARD (PCMCIA) support=0A=
#device		card=0A=
#device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000=0A=
#device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable=0A=
=0A=
# Serial (COM) ports=0A=
#device		sio0	at isa? port IO_COM1 flags 0x10 irq 4=0A=
#device		sio1	at isa? port IO_COM2 irq 3=0A=
#device		sio2	at isa? disable port IO_COM3 irq 5=0A=
#device		sio3	at isa? disable port IO_COM4 irq 9=0A=
=0A=
# Parallel port=0A=
#device		ppc0	at isa? irq 7=0A=
#device		ppbus		# Parallel port bus (required)=0A=
#device		lpt		# Printer=0A=
#device		plip		# TCP/IP over parallel=0A=
#device		ppi		# Parallel port interface device=0A=
#device		vpo		# Requires scbus and da=0A=
=0A=
=0A=
# PCI Ethernet NICs.=0A=
#device		de		# DEC/Intel DC21x4x (``Tulip'')=0A=
#device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)=0A=
#device		tx		# SMC 9432TX (83c170 ``EPIC'')=0A=
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')=0A=
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')=0A=
=0A=
# PCI Ethernet NICs that use the common MII bus controller code.=0A=
# NOTE: Be sure to keep the 'device miibus' line in order to use these =
NICs!=0A=
device		miibus		# MII bus support=0A=
device		dc		# DEC/Intel 21143 and various workalikes=0A=
#device		pcn		# AMD Am79C79x PCI 10/100 NICs=0A=
#device		rl		# RealTek 8129/8139=0A=
#device		sf		# Adaptec AIC-6915 (``Starfire'')=0A=
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016=0A=
#device		ste		# Sundance ST201 (D-Link DFE-550TX)=0A=
#device		tl		# Texas Instruments ThunderLAN=0A=
#device		vr		# VIA Rhine, Rhine II=0A=
#device		wb		# Winbond W89C840F=0A=
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A=
=0A=
# ISA Ethernet NICs.=0A=
#device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000=0A=
#device		ex=0A=
#device		ep=0A=
#device		fe0	at isa? port 0x300=0A=
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A=
# exists only as a PCMCIA device, so there is no ISA attatement needed=0A=
# and resources will always be dynamically assigned by the pccard code.=0A=
#device		wi=0A=
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below =
will=0A=
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A=
# mode (the factory default). If you set the switches on your ISA=0A=
# card for a manually chosen I/O address and IRQ, you must specify=0A=
# those paremeters here.=0A=
#device		an=0A=
# Xircom Ethernet=0A=
#device		xe=0A=
# The probe order of these is presently determined by =
i386/isa/isa_compat.c.=0A=
#device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000=0A=
#device		le0	at isa? port 0x300 irq 5 iomem 0xd0000=0A=
#device		lnc0	at isa? port 0x280 irq 10 drq 0=0A=
#device		cs0	at isa? port 0x300=0A=
#device		sn0	at isa? port 0x300 irq 10=0A=
=0A=
# Pseudo devices - the number indicates how many units to allocated.=0A=
pseudo-device	loop		# Network loopback=0A=
pseudo-device	ether		# Ethernet support=0A=
#pseudo-device	sl	1	# Kernel SLIP=0A=
#pseudo-device	ppp	1	# Kernel PPP=0A=
#pseudo-device	tun		# Packet tunnel.=0A=
pseudo-device	pty		# Pseudo-ttys (telnet etc)=0A=
#pseudo-device	md		# Memory "disks"=0A=
#pseudo-device	gif	4	# IPv6 and IPv4 tunneling=0A=
#pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)=0A=
=0A=
# The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A=
# Be aware of the administrative consequences of enabling this!=0A=
pseudo-device	bpf		#Berkeley packet filter=0A=
=0A=
# USB support=0A=
device		uhci		# UHCI PCI->USB interface=0A=
device		ohci		# OHCI PCI->USB interface=0A=
device		usb		# USB Bus (required)=0A=
device		ugen		# Generic=0A=
device		uhid		# "Human Interface Devices"=0A=
#device		ukbd		# Keyboard=0A=
#device		ulpt		# Printer=0A=
#device		umass		# Disks/Mass storage - Requires scbus and da=0A=
device		ums		# Mouse=0A=
#device		uscanner	# Scanners=0A=
# USB Ethernet, requires mii=0A=
#device		aue		# ADMtek USB ethernet=0A=
#device		cue		# CATC USB ethernet=0A=
#device		kue		# Kawasaki LSI USB ethernet=0A=

------=_NextPart_000_009A_01C01A5B.6905AE60--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?009d01c01a85$52838f20$0200000a>