Date: Sun, 8 Nov 1998 17:21:04 -0700 (MST) From: "Chad R. Larson" <chad@freeway.dcfinc.com> To: jose@we.lc.ehu.es (José Mª Alcaide) Cc: stable@FreeBSD.ORG Subject: Re: Ultra SCSI Message-ID: <199811090021.RAA00316@freeway.dcfinc.com> In-Reply-To: <36458C27.2E3E52BC@we.lc.ehu.es> from =?ISO-8859-1?Q?Jos=E9_M=AA_Alcaide?= at "Nov 8, 98 01:18:47 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
As I recall, Jose Alcaide wrote: > Chad R. Larson wrote: > > I'm building a new machine. It has an Intel RU440FX motherboard, > > with an embedded Ultra Fast/Wide SCSI controller built with the > > Adaptec 7880 chip set. > > > > It also has two Ultra Fast/Wide SCSI disk drives. Here's the output > > of a "grep ahc0 /var/run/dmesg.boot", after booting with the -v > > flag: > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > > ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:13:0 > > ahc0: Reading SEEPROM...checksum error > > ahc0: No SEEPROM available > > What's the FreeBSD version you are using? I had a similar problem with > 2.2.6-RELEASE. The motherboard was (and is) an Iwill PIILS, and the > cause was that the serial EEPROM on the mb is a C56 o C66, but the > AHC driver supposed it has to be a C46 (which is the SEEPROM used > in the Adaptec 2940 cards). The problem was fixed in later versions > of /usr/src/sys/pci/aic7870.c (currently is 1.41.2.10 for -STABLE). > > Hope this helps, > -- JMA I'm using 2.2-STABLE (CVSup'd last week). -crl -- Chad R. Larson (CRL15) 602-953-1392 Brother, can you paradigm? chad@dcfinc.com chad@larsons.org chad@anasazi.com larson1@home.net DCF, Inc. - 14623 North 49th Place, Scottsdale, Arizona 85254-2207 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199811090021.RAA00316>