From owner-freebsd-scsi Tue Sep 8 12:56:18 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id MAA03330 for freebsd-scsi-outgoing; Tue, 8 Sep 1998 12:56:18 -0700 (PDT) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from narnia.plutotech.com (narnia.plutotech.com [206.168.67.130]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA03317 for ; Tue, 8 Sep 1998 12:56:14 -0700 (PDT) (envelope-from gibbs@narnia.plutotech.com) Received: (from gibbs@localhost) by narnia.plutotech.com (8.8.8/8.7.3) id NAA06423; Tue, 8 Sep 1998 13:49:57 -0600 (MDT) Date: Tue, 8 Sep 1998 13:49:57 -0600 (MDT) From: "Justin T. Gibbs" Message-Id: <199809081949.NAA06423@narnia.plutotech.com> To: mjacob@feral.com cc: scsi@FreeBSD.ORG Subject: Re: right return message for CAM sa driver? Newsgroups: pluto.freebsd.scsi In-Reply-To: User-Agent: tin/pre-1.4-971204 (UNIX) (FreeBSD/3.0-CURRENT (i386)) Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org In article you wrote: > > ENODEV Operation not supported by device > > seems better in this context than "Device not configured". The > device is configured (it's attached and configured)- it's just > not ready for operation. > > Usually this is an EIO error, but if you're going to have other > than that, I believe ENXIO is misleading. You have access to the Perforce repository... 8-) -- Justin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message