Date: Tue, 1 Jun 2004 15:33:44 +0100 From: Wayne Pascoe <freebsd-feb@penguinpowered.org> To: Olaf Hoyer <ohoyer@ohoyer.de> Cc: freebsd-questions@freebsd.org Subject: Re: Intel Ethernet card not being detected Message-ID: <20040601143344.GB67057@marvin.penguinpowered.org> In-Reply-To: <20040601134914.Q53545@gaff.hhhr.ision.net> References: <20040601110940.GA65805@marvin.penguinpowered.org> <20040601134914.Q53545@gaff.hhhr.ision.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Jun 01, 2004 at 01:52:21PM +0200, Olaf Hoyer wrote: > Well, I could imagine some special version of a 100Pro/VM integrated > one, or some special (latest version) 82550 or so. > > Could you post a "pciconf -lv" from a FreeBSD system? > Would help to identify the parts... I've tried installing 5.2.1 on the machine and it still doesn't work. Now though, it's even worse, as the em0 device doesn't work either. I get something along these lines: em0: Link is up 10Mbps Half Duplex em0: watchdog timeout -- resetting em0: Link is up 10Mbps Half Duplex em0: watchdog timeout -- resetting I can ping the card, but nothing else. This worked fine under 4.10-RELEASE So I've had to slap an additional Intel Etherexpress pro in there to get the pciconf off of the machine. That one works, but it's an old card that I had lying around here. I'm attaching pciconf.txt which is the output of my pciconf commands as well as the dmesg from boot. Any enlightenment would be much appreciated. The motherboard is a Tyan S5102 Tomcat i875P according to my supplier Thanks a lot for the help :) -- Wayne Pascoe (gpg --keyserver www.co.uk.pgp.net --recv-keys 79A7C870) WINDOWS: Where do you want to go today? LINUX: Where do you want to go tomorrow? FreeBSD: Are you guys coming or what? --huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4. ACPI APIC Table: <IntelR AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2806.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536805376 (511 MB) avail memory = 511766528 (488 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IntelR AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00fdea0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xa000-0xa01f mem 0xf3000000-0xf301ffff irq 10 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb000-0xb03f mem 0xf2000000-0xf201ffff,0xf2020000-0xf2020fff irq 17 at device 1.0 on pci3 fxp0: Ethernet address 00:02:b3:4c:a4:6e miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci3: <display, VGA> at device 7.0 (no driver attached) pci3: <network, ethernet> at device 8.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 orm0: <Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc491a160 ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA100 acd0: CDROM <SAMSUNG CD-ROM SC-152G> at ata0-slave PIO4 GEOM: create disk ad2 dp=0xc4840660 ad2: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata1-master UDMA100 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s1a --huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="pciconf.txt" agp0@pci0:0:0: class=0x060000 card=0x25788086 chip=0x25788086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82875P Memory Controller Hub' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82875P Processor to AGP Controller' class = bridge subclass = PCI-PCI pcib2@pci0:3:0: class=0x060400 card=0x00000000 chip=0x257b8086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82875P Processor to PCI to CSA bridge' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x510210f1 chip=0x24d28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x510210f1 chip=0x24d48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x510210f1 chip=0x24d78086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3' class = serial bus subclass = USB uhci3@pci0:29:3: class=0x0c0300 card=0x510210f1 chip=0x24de8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4' class = serial bus subclass = USB none0@pci0:29:7: class=0x0c0320 card=0x510210f1 chip=0x24dd8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH4/ICH5R) USB EHCI Controller' class = serial bus subclass = USB pcib3@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x510210f1 chip=0x24db8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' class = mass storage subclass = ATA none1@pci0:31:3: class=0x0c0500 card=0x510210f1 chip=0x24d38086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) SMBus Controller' class = serial bus subclass = SMBus em0@pci2:1:0: class=0x020000 card=0x10198086 chip=0x10198086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82547EI Gigabit Ethernet Controller (LOM)' class = network subclass = ethernet fxp0@pci3:1:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0d hdr=0x00 vendor = 'Intel Corporation' device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet none2@pci3:7:0: class=0x030000 card=0x80081002 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies' device = 'Rage XL PCI' class = display subclass = VGA none3@pci3:8:0: class=0x020000 card=0x30108086 chip=0x10518086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) PRO/100 VE Network Connection' class = network subclass = ethernet --huq684BweRXVnRxX--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040601143344.GB67057>