Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Oct 1995  -0400 ()
From:      "matthew c. mead" <mmead@Glock.COM>
To:        questions@freebsd.org
Subject:   Local mail problems!
Message-ID:  <199510091404.KAA15884@Glock.COM>

Next in thread | Raw E-Mail | Index | Archive | Help
	It seems that on all local mail, the date lines look something like
this:
Mon, 9 Oct 1995,  (-0400)

	Leaving no time in the line, which is a Bad Thing(tm).  Anyone have
any clues as to why?  Follows is a little system info.

FreeBSD Glock.COM 2.0.5-RELEASE FreeBSD 2.0.5-RELEASE #0: Sun Oct  1 15:40:48 EDT 1995     mmead@Glock.COM:/usr/src/sys/compile/Glock  i386

FreeBSD 2.0.5-RELEASE #0: Sun Oct  1 15:40:48 EDT 1995
    mmead@Glock.COM:/usr/src/sys/compile/Glock
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping=5
  Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory  = 41549824 (10144 pages)
avail memory = 39591936 (9666 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 11 on isa
ed0: address 00:40:33:20:e4:60, type NE2000 (16 bit) 
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f on isa
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
ahc0 not found
npx0 on motherboard
npx0: INT 16 interface
gus0 at 0x220 irq 15 drq 1 flags 0x3 on isa
gus0: <Gravis UltraSound MAX (512k)>
gus0: <GUS MAX (CS4231)>
Probing for devices on the pci0 bus:
        configuration mode 1 allows 32 devices.
pci0:0: INTEL CORPORATION, device=0x122d, class=bridge [not supported]
pci0:7: INTEL CORPORATION, device=0x122e, class=bridge [not supported]
vga0 <Display device> rev 0 on pci0:19
ahc0 <Adaptec 294X SCSI host adapter> rev 0 int a irq 9 on pci0:20
ahc0: reading board settings
ahc0: 294x Single Channel, SCSI Id=7, aic7870, 16 SCBs
ahc0: Downloading Sequencer Program...Done
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 10.0MB/s, offset = 0xf
(ahc0:0:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1002MB (2053880 512 byte sectors)
ahc0: target 1 synchronous at 10.0MB/s, offset = 0xf
(ahc0:1:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 1002MB (2053880 512 byte sectors)
pci0: uses 4096 bytes of memory from f0800000 upto f0800fff.
pci0: uses 256 bytes of I/O space from 6000 upto 60ff.
bpf: lo0 attached


-matt

-- 
Matthew C. Mead

mmead@Glock.COM              | Network Administration and Software Development
http://www.Glock.COM/~mmead/ | Consulting: BizNet Technologies -> mmead@bnt.com



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?199510091404.KAA15884>