Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Oct 1996 16:26:06 -0500 (CDT)
From:      "Paul T. Root" <proot@horton.iaces.com>
To:        questions@freebsd.org
Subject:   Problems with Quantum 4gig drive
Message-ID:  <199610032126.QAA13524@horton.iaces.com>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi,
	I've got a Compaq DeskPro 2000 (133MHz) machine, with 32 meg,
an Adaptec 2940UW, a Seagate ST32550W 2 gig drive on sd0 and
a Quantum XP34300W 4gig drive on sd1. 

My problem is the Quantum won't work. I did install it and things went fine
for a couple of hours then. I get parity errors and the SCSI bus hangs up.

I did disable the IDE on the motherboard of the Compaq, and without the
Quantum drive it works fine. The Quantum is in the middle connector on 
the internal cable, the Seagate is on the end, there is nothing connected
to the external connector.

Could it be I need to set a jumper on the quantum? Termination? I didn't
receive a book with the Quantum (I do have one for the Seagate). The 
drive came installed with an IDE drive, I pulled the IDE, and installed
the Seagate as sd0 and jumpered the Quantum as sd1. That's the only
changes to the drives.

Any ideas?

Thanks,
	Paul.

Included is the messages, I truncated for brievity:


Oct  3 13:15:49 newwww /kernel: FreeBSD 2.1.5-RELEASE #0: Thu Oct  3 08:55:34 CDT 1996
Oct  3 13:15:49 newwww /kernel:     proot@newwww.iaces.com:/usr/src/sys/compile/WWW
Oct  3 13:15:49 newwww /kernel: CPU: 133-MHz Pentium 735\90 or 815\100 (Pentium-class CPU)
Oct  3 13:15:49 newwww /kernel:   Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
Oct  3 13:15:49 newwww /kernel:   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
Oct  3 13:15:50 newwww /kernel: real memory  = 33554432 (32768K bytes)
Oct  3 13:15:50 newwww /kernel: Physical memory hole(s):
Oct  3 13:15:50 newwww /kernel: avail memory = 30789632 (30068K bytes)
Oct  3 13:15:50 newwww /kernel: Probing for devices on PCI bus 0:
Oct  3 13:15:50 newwww /kernel: chip0 <Intel 82439> rev 1 on pci0:0
Oct  3 13:15:50 newwww /kernel: fxp0 <Intel EtherExpress Pro/100B Fast Ethernet> rev 1 int a irq 11 on pci0:2
Oct  3 13:15:50 newwww /kernel: fxp0: Ethernet address 00:a0:c9:08:1e:e1
Oct  3 13:15:50 newwww /kernel: ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:4
Oct  3 13:15:50 newwww /kernel: ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
Oct  3 13:15:50 newwww /kernel: ahc0 waiting for scsi devices to settle
Oct  3 13:15:50 newwww /kernel: (ahc0:0:0): "SEAGATE ST32550W 0021" type 0 fixed SCSI 2
Oct  3 13:15:50 newwww /kernel: sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors)
Oct  3 13:15:50 newwww /kernel: sd0(ahc0:0:0): with 3511 cyls, 11 heads, and an average 108 sectors/track
Oct  3 13:15:50 newwww /kernel: (ahc0:1:0): "Quantum XP34300W L912" type 0 fixed SCSI 2
Oct  3 13:15:50 newwww /kernel: sd1(ahc0:1:0): Direct-Access 4101MB (8399520 512 byte sectors)
Oct  3 13:15:50 newwww /kernel: sd1(ahc0:1:0): with 3907 cyls, 20 heads, and an average 107 sectors/track
Oct  3 13:15:50 newwww /kernel: chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0
Oct  3 13:15:50 newwww /kernel: chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1
Oct  3 13:15:50 newwww /kernel: vga0 <VGA-compatible display device> rev 0 on pci0:15
Oct  3 13:15:51 newwww /kernel: Probing for devices on the ISA bus:
Oct  3 13:15:51 newwww /kernel: sc0 at 0x60-0x6f irq 1 on motherboard
Oct  3 13:15:51 newwww /kernel: sc0: VGA color <16 virtual consoles, flags=0x0>
Oct  3 13:15:51 newwww /kernel: sio0 at 0x3f8-0x3ff irq 4 on isa
Oct  3 13:15:51 newwww /kernel: sio0: type 16550A
Oct  3 13:15:51 newwww /kernel: sio1: disabled, not probed.
Oct  3 13:15:51 newwww /kernel: sio2: disabled, not probed.
Oct  3 13:15:51 newwww /kernel: sio3: disabled, not probed.
Oct  3 13:15:51 newwww /kernel: lpt0 at 0x378-0x37f irq 7 on isa
Oct  3 13:15:51 newwww /kernel: lpt0: Interrupt-driven port
Oct  3 13:15:51 newwww /kernel: lp0: TCP/IP capable interface
Oct  3 13:15:51 newwww /kernel: mse0: disabled, not probed.
Oct  3 13:15:51 newwww /kernel: psm0 at 0x60-0x63 irq 12 on motherboard
Oct  3 13:15:51 newwww /kernel: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
Oct  3 13:15:51 newwww /kernel: fdc0: NEC 72065B
Oct  3 13:15:51 newwww /kernel: fd0: 1.44MB 3.5in
Oct  3 13:15:51 newwww /kernel: npx0 on motherboard
Oct  3 13:15:51 newwww /kernel: npx0: INT 16 interface
.
.
.
Oct  3 13:54:19 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase.
Oct  3 13:54:32 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0)
Oct  3 13:54:32 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 13:54:32 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer
Oct  3 13:54:32 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 13:54:32 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 4 SCBs aborted
Oct  3 13:54:32 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 
Oct  3 13:54:32 newwww /kernel: , retries:3
Oct  3 13:54:32 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
Oct  3 13:54:32 newwww /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 1
Oct  3 13:54:32 newwww /kernel: , retries:3
Oct  3 14:11:21 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase.
Oct  3 14:11:33 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0)
Oct  3 14:11:33 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:11:33 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer
Oct  3 14:11:33 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:11:33 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 3 SCBs aborted
Oct  3 14:11:33 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 
Oct  3 14:11:33 newwww /kernel: , retries:3
Oct  3 14:11:33 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
Oct  3 14:11:33 newwww /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 1
Oct  3 14:11:33 newwww /kernel: , retries:3
Oct  3 14:11:51 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase.
Oct  3 14:12:03 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(3)
Oct  3 14:12:03 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:12:03 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer
Oct  3 14:12:03 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:12:03 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 3 SCBs aborted
Oct  3 14:12:03 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 
Oct  3 14:12:03 newwww /kernel: , retries:3
Oct  3 14:12:03 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
Oct  3 14:12:03 newwww /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 1
Oct  3 14:12:04 newwww /kernel: , retries:3
Oct  3 14:13:51 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase.
Oct  3 14:14:04 newwww last message repeated 3 times
Oct  3 14:14:04 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(0)
Oct  3 14:14:04 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:14:04 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer
Oct  3 14:14:04 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:14:04 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 7 SCBs aborted
Oct  3 14:14:04 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 
Oct  3 14:14:04 newwww /kernel: , retries:3
Oct  3 14:14:04 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
Oct  3 14:14:04 newwww /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 1
Oct  3 14:14:04 newwww /kernel: , retries:3
Oct  3 14:15:21 newwww /kernel: sd1(ahc0:1:0): parity error during Data-In phase.
Oct  3 14:15:34 newwww /kernel: ahc0: ahc_intr - referenced scb not valid during scsiint 0x17 scb(1)
Oct  3 14:15:34 newwww /kernel: sd0(ahc0:0:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:15:34 newwww /kernel: sd1(ahc0:1:0): asserted ATN - device reset in message buffer
Oct  3 14:15:34 newwww /kernel: sd1(ahc0:1:0): timed out in datain phase, SCSISIGI == 0xb6
Oct  3 14:15:34 newwww /kernel: ahc0: Issued Channel A Bus Reset #1. 4 SCBs aborted
Oct  3 14:15:34 newwww /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,2 
Oct  3 14:15:34 newwww /kernel: , retries:3
Oct  3 14:15:34 newwww /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
Oct  3 14:15:34 newwww /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device reset occurred field replaceable unit: 1
Oct  3 14:15:34 newwww /kernel: , retries:3

 
-- 
Paul T. Root                    E/Mail: proot@iaces.com
200 S. 5th St. Suite 1100       PAG: +1 (800) SKY-PAGE PIN: 537-7370
Minneapolis, MN  55402          WRK: +1 (612) 663-1979
NIC:    PTR                     FAX: +1 (612) 663-8030




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?199610032126.QAA13524>