Date: Tue, 18 Jul 2000 19:37:08 +0200 From: Wilko Bulte <wkb@freebie.demon.nl> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: FreeBSD-alpha mailing list <freebsd-alpha@freebsd.org> Subject: test results for Lynx (AS2100A) Message-ID: <20000718193708.A2031@freebie.demon.nl>
next in thread | raw e-mail | index | archive | help
Below the results of booting 4.1-RC on a Lynx (AS2100A).
Works reasonably well, but locks up/waits forever after printing
'waiting 15 secs for SCSI devices to settle'.
Any ideas? Maybe interrupts don't get thru? (wild guess).
Test boot floppies can be pulled over for test, I have the Lynx wednesday &
thursday available..
Wilko
---------
Script started on Tue Jul 18 14:45:39 2000
wilklt#tip a
connected
P00>>>sho conf
Digital Equipment Corporation
AlphaServer 2100A 4/200
SRM Console V5.3-10 VMS PALcode V5.56-7, OSF PALcode V1.45-12
Component Status Module ID
CPU 0 P B2020-AA DECchip (tm) 21064-3
Memory 0 P B2021-CA 128 MB
I/O B2222-AA
dva0.0.0.1000.0 RX26/RX23
Slot Option Hose 0, Bus 0, PCI
2 Intel 82375 Bridge to Bus 1, EISA
3 DECchip 21050-AA Bridge to Bus 2, PCI
7 DECchip 21040-AA ewa0.0.0.7.0 00-00-F8-23-16-31
9 QLogic ISP1020 pkb0.7.0.9.0 SCSI Bus ID 7
dkb0.0.0.9.0 RZ29B
dkb600.6.0.9.0 RRD46
Slot Option Hose 0, Bus 1, EISA
1 Compaq Qvision
3 Mylex DAC960 dra.0.0.1003.0
dra0.0.0.1003.0 5 Member RAID 5
Slot Option Hose 0, Bus 2, PCI
1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7
dka600.6.0.2001.0 RRD43
6 Mylex DAC960 drb.0.0.2006.0
drb0.0.0.2006.0 2 Member RAID 1
drb1.0.0.2006.0 2 Member RAID 1
drb2.0.0.2006.0 2 Member RAID 1
P00>>>sho
auto_action HALT
boot_dev drb0.0.0.2006.0
boot_file
boot_osflags 0,0
boot_reset OFF
bootdef_dev drb0.0.0.2006.0
booted_dev
booted_file
booted_osflags
bus_probe_algorithm new
char_set 0
com1_baud 9600
com1_flow SOFTWARE
com1_modem OFF
com2_baud 9600
com2_flow SOFTWARE
com2_modem OFF
console serial
controlp ON
cpu_enabled ff
d_bell off
d_cleanup on
d_complete off
d_eop off
d_group field
d_harderr halt
d_loghard on
d_logsoft off
d_omit
d_oper on
d_passes 1
d_quick off
d_report full
d_runtime 0
d_softerr halt
d_startup off
d_status off
d_trace off
d_verbose 0
dump_dev
enable_audit ON
ewa0_arp_tries 3
ewa0_bootp_file
ewa0_bootp_server
ewa0_bootp_tries 3
ewa0_def_ginetaddr 0.0.0.0
ewa0_def_inetaddr 0.0.0.0
ewa0_def_inetfile
ewa0_def_sinetaddr 0.0.0.0
ewa0_def_subnetmask 0.0.0.0
ewa0_ginetaddr 0.0.0.0
ewa0_inet_init bootp
ewa0_inetaddr 0.0.0.0
ewa0_inetfile
ewa0_loop_count 2
ewa0_loop_inc d0
ewa0_loop_patt ffffffff
ewa0_loop_size 100
ewa0_lp_msg_node 8
ewa0_mode Twisted-Pair
ewa0_protocols MOP
ewa0_sinetaddr 0.0.0.0
ewa0_tftp_tries 3
exdep_data 0
exdep_location 0
exdep_size 0
exdep_space pmem
exdep_type 3
full_powerup_diags ON
heap_expand NONE
i g
j u
kbd_hardware_type PCXAL
language 36
language_name English (American)
license MU
ocp_text StorageWorks
ocp_text_default Model 4/200
os_type UNIX
pal VMS PALcode V5.56-7, OSF PALcode V1.45-12
pci_arb Partial-Rotating
pci_parity ON
pka0_disconnect 1
pka0_fast 1
pka0_host_id 7
pkb0_host_id 7
pkb0_soft_term on
rcm_answer
rcm_dialout
rcm_init
screen_mode OFF
scsi_poll ON
scsi_reset ON
scsnode
scssystemid 65534
scssystemidh 0
srm2dev
sys_serial_num
tga_sync_green 8
tt_allow_login 1
tty_dev 0
version V5.3-10 Oct 16 1998 14:06:58
P00>>>
P00>>>sho dev
dka600.6.0.2001.0 DKA600 RRD43 1084
dkb0.0.0.9.0 DKB0 RZ29B 0014
dkb600.6.0.9.0 DKB600 RRD46 0557
dra0.0.0.1003.0 DRA0 5 Member RAID 5
drb0.0.0.2006.0 DRB0 2 Member RAID 1
drb1.0.0.2006.0 DRB1 2 Member RAID 1
drb2.0.0.2006.0 DRB2 2 Member RAID 1
dva0.0.0.1000.0 DVA0 RX26/RX23
ewa0.0.0.7.0 EWA0 00-00-F8-23-16-31
pka0.7.0.2001.0 PKA0 SCSI Bus ID 7
pkb0.7.0.9.0 PKB0 SCSI Bus ID 7 5.57
P00>>>boot dva0
(boot dva0.0.0.1000.0 -flags 0,0)
block 0 of dva0.0.0.1000.0 is a valid boot block
reading 15 blocks from dva0.0.0.1000.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
VMS PAL rev: 0x4000700010538
OSF PAL rev: 0x4000c0002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 0.3
(root@miata.wbnet, Sun Jul 16 17:19:42 GMT 2000)
Memory: 131072 k
Please insert MFS root floppy and press enter:
Entering kernel at 0xfffffc00003297e0...
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 41rc-16jul #0: Sun Jul 16 19:24:36 GMT 2000
root@miata.wbnet:/usr/src/sys/compile/BOOTMFS
DEC AlphaServer 2100A
AlphaServer 2100A 4/200, 190MHz
8192 byte page size, 1 processor.
CPU: EV4 (21064) major=2 minor=1
OSF PAL rev: 0x4000c0002012d
real memory = 132046848 (128952K bytes)
avail memory = 120553472 (117728K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00008fe000.
Preloaded mfs_root "/mfsroot" at 0xfffffc00008fe0a0.
md0: Preloaded image </mfsroot> 2949120 bytes at 0xfffffc000062b410
md1: Malloc disk
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pcib1: <DEC 21050 PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
sym0: <810a> port 0x5000-0x50ff mem 0x81004000-0x810040ff irq 60 at device 1.0 on pci2
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at T2 irq 60
pci2: <unknown card> (vendor=0x1069, dev=0x0001) at 6.0 irq 80
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81111000-0x8111107f irq 68 at device 7.0 on pci0
de0: interrupting at T2 irq 68
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:16:31
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x81110000-0x81110fff irq 76 at device 9.0 on pci0
isp0: interrupting at T2 irq 76
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.0 irq 32
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.4
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.0 irq 32
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.4
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at T2 irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at T2 irq 1
psm: keyboard controller failed.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at T2 irq 4
sio1: reserved for low-level i/o
Timecounter "alpha" frequency 190009732 Hz
Waiting 15 seconds for SCSI devices to settle
de0: enabling 10baseT port
wilklt#
Script done on Tue Jul 18 14:55:36 2000
--
Wilko Bulte http://www.freebsd.org
wilko@freebsd.org http://www.nlfug.nl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000718193708.A2031>