Date: Sat, 31 Dec 2016 01:50:13 +0100 From: swjatoslaw gerus <milstar2@eml.cc> To: freebsd-questions@freebsd.org Subject: can not read with ls -lsar but loader work Re: performed- Fwd: 2-Fwd: You have made error ...#### dd if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb1 bs=1M conv=sync Message-ID: <1483145413.806714.833416057.0403136E@webmail.messagingengine.com> In-Reply-To: <1483143086.798193.833401249.611AE9E5@webmail.messagingengine.com> References: <1483143086.798193.833401249.611AE9E5@webmail.messagingengine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
can not read with ls -lsar but loader work in 1 attempt some 2 days before in version 11.0 bs=1m sdb1 -invalid argument 2 attempt 11.0 bs=1048576 sdb1 dd succes but can not start 3 attempt( 11 as in your suggest from multiple author) -file not exist 4 attempt 11.0 bs=1048576 sdb1 dd succes can not see with ls -lsar after mount in /mnt ... can see with more poweroff plug in poweron loader started asked about auto/manual partion -------------------- Wish good mood https://www.youtube.com/watch?v=7a4GhBD8chk -- swjatoslaw gerus milstar2@eml.cc On Sat, Dec 31, 2016, at 01:11 AM, swjatoslaw gerus wrote: > 1.Author corrected your error not 11,but 11.0 -downloading > 2. with 1m -invalid argument for both case sdb1 or sdb > 3.dd with 11.0 ...of /dev/sdb bs=1048576 ... > work 735 mb 74.181 sek > after mount in /mnt > ls -.lsar ... as before > more -some change > Non system disk ,press any key to reboot > > ... > or must after dd with sdb > ------------------------------------------------------------------------------------- > mount sdb ? not mount name of device sdb1 from fdisk-l > -- > swjatoslaw gerus > milstar2@eml.cc > > ----- Original message ----- > From: swjatoslaw gerus <milstar2@eml.cc> > To: freebsd-questions@freebsd.org > Subject: 2-Fwd: You have made error ...#### dd > if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb1 bs=1M conv=sync > Date: Sat, 31 Dec 2016 00:52:39 +0100 > > 1.Author corrected your error > 2. with 1m -invalid argument for both case sdb1 or sdb > -- > swjatoslaw gerus > milstar2@eml.cc > > ----- Original message ----- > From: swjatoslaw gerus <milstar2@eml.cc> > To: freebsd-questions@freebsd.org > Subject: You have made error ...#### dd > if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb1 bs=1M conv=sync > Date: Sat, 31 Dec 2016 00:47:39 +0100 > > From: Polytropon <freebsd@edvax.de> > > This is to be expected because the stick hasn't been > prepared correctly. Again: > > # dd if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb bs=1M > conv=sync > > is the correct command here. That kind of mistake can > be summarized as "fat fingers"... ;-) > ############ > > You have made error > -- > swjatoslaw gerus > milstar2@eml.cc > > ----- Original message ----- > From: Polytropon <freebsd@edvax.de> > To: swjatoslaw gerus <milstar2@eml.cc> > Cc: freebsd-questions@freebsd.org > Subject: Re: Fwd: Re: Fwd: system -invalid argument 1m #### dd > if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb1 bs=1M conv=sync > Date: Fri, 30 Dec 2016 23:19:09 +0100 > > On Fri, 30 Dec 2016 22:07:31 +0100, swjatoslaw gerus wrote: > > this questions was answered before > > > > for linux not 1m ,but 1048576 without suffiks > > that work file is sended to /dev/sdb1 > > But read with caution: /dev/sdb (no "1" appended) needs to > be the device the file has to be written to. Remember: > /dev/sdb1 is the 1st partition of the 2nd disk unit, > /dev/sdb1 is _the_ 2nd disk unit, and _that_ is where > the image needs to go - it represents a whole device > content. > > > > > but plug sandisk 16 gb before start , notebook can not start > > This is to be expected because the stick hasn't been > prepared correctly. Again: > > # dd if=FreeBSD-11-RELEASE-amd64-memstick.img of=/dev/sdb bs=1M > conv=sync > > is the correct command here. That kind of mistake can > be summarized as "fat fingers"... ;-) > > > > > file after mounting can see with more, but can not see with ls -lsar > > You can even "more /dev/sdb1" and "more /dev/sdb" without > mounting it, there is no relation. > > > > -- > Polytropon > Magdeburg, Germany > Happy FreeBSD user since 4.0 > Andra moi ennepe, Mousa, ... > > -- > http://www.fastmail.com - Does exactly what it says on the tin > > > -- > http://www.fastmail.com - Faster than the air-speed velocity of an > unladen european swallow > > > -- > http://www.fastmail.com - A no graphics, no pop-ups email service > -- http://www.fastmail.com - Or how I learned to stop worrying and love email again
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1483145413.806714.833416057.0403136E>