From owner-freebsd-bugs Fri Jan 12 7:15:37 2001 Delivered-To: freebsd-bugs@freebsd.org Received: from p133.inode.at (p133.inode.at [195.58.160.3]) by hub.freebsd.org (Postfix) with ESMTP id 112E237B402 for ; Fri, 12 Jan 2001 07:15:16 -0800 (PST) Received: from inode.at (line199.adsl.wien.inode.at [213.229.7.199]) by p133.inode.at (8.11.1/8.10.0.0) with ESMTP id f0CFFEh30061 for ; Fri, 12 Jan 2001 16:15:14 +0100 Message-ID: <3A5F1FAE.60CF75B7@inode.at> Date: Fri, 12 Jan 2001 16:15:58 +0100 From: Michael Bretterklieber X-Mailer: Mozilla 4.75 [de] (Windows NT 5.0; U) X-Accept-Language: de MIME-Version: 1.0 To: bugs@FreeBSD.org Subject: Athlon Thunderbird 700 w. Asus K7M Motherboard vs FreeBSD 4.2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I have problems with my Athlon Thunderbird 700 on an Asus K7M Motherboard (Bios 1009) and FreeBSD 4.2. The system is very very slow, like on an old 386. I have this problems since I updatet from an Athlon 500 to this Athlon Thunderbird 700. I have on the same Harddisk Win98 and Win2K and they work without problems, fast and stable. This situation is disastrous for me, because I had to work under FreeBSD, so I hope, that somebody can help. I tried the Generic-Kernel and my own Kernel-config, but the result was the same. kernel output: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #1: Sat Dec 2 21:47:42 CET 2000 root@worf.jawa.at:/usr/src/sys/compile/WORF Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (704.94-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff AMD Features=0xc0440000<,AMIE,DSP,3DNow!> real memory = 134152192 (131008K bytes) config> q avail memory = 127262720 (124280K bytes) Preloaded elf kernel "kernel" at 0xc0354000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035409c. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 5.0 irq 11 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 4.2 irq 9 chip1: at device 4.4 on pci0 pcm0: port 0xd000-0xd003,0xd400-0xd4ff irq 10 at device 4.5 on pci0 bktr0: mem 0xeddfd000-0xeddfdfff irq 5 at device 14.0 on pci0 iicbb0: on bti2c0 iicbus0: on iicbb0 master-only smbus0: on bti2c0 bktr0: Card has no configuration EEPROM. Cannot determine card make. bktr0: Pinnacle/Miro TV, Temic NTSC tuner. pci0: (vendor=0x109e, dev=0x0878) at 14.1 irq 5 sym0: <810a> port 0xd800-0xd8ff mem 0xefffff00-0xefffffff irq 10 at device 15.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using LOAD/STORE-based firmware. de0: port 0xc800-0xc87f mem 0xeffffe80-0xeffffeff irq 9 at device 16.0 on pci0 de0: SMC 21041 [10Mb/s] pass 1.1 de0: address 00:00:c0:99:b5:bf fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP Probing for PnP devices on ppbus0: ppbus0: PCL,MLC,PML lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 ppi0: on ppbus0 joy0 at port 0x201 on isa0 de0: enabling 10baseT port ad0: 29314MB [59560/16/63] at ata0-master UDMA66 ad2: 9641MB [19590/16/63] at ata1-master UDMA33 ad3: 6197MB [12592/16/63] at ata1-slave UDMA33 Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (probe5:sym0:0:5:0): phase change 6-7 6@07e2ef8c resid=4. Mounting root from ufs:/dev/ad0s3a cd0 at sym0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at sym0 bus 0 target 5 lun 0 da0: Removable Direct Access SCSI-2 device da0: 3.300MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present uhci0: port 0xcc00-0xcc1f irq 9 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered bye, -- -------------------------------------- E-mail: Michael.Bretterklieber@jawa.at ---------------------------- JAWA MANAGEMENT und SOFTWARE Liebenauer Hauptstr. 200 A-8041 GRAZ Tel: ++43-(0)316-403274-12 Fax: ++43-(0)316-403274-10 GSM: ++43-(0)676-93 96 698 homepage: http://www.jawa.at --------- privat ----------- E-mail: mbretter@inode.at homepage: http://www.inode.at/mbretter -------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message