Date: Tue, 15 Sep 1998 21:51:19 -0700 From: Scott Michel <scottm@cs.ucla.edu> To: freebsd-current@FreeBSD.ORG Subject: syslogd exiting/not booting Message-ID: <199809160451.VAA00343@mordred.cs.ucla.edu>
next in thread | raw e-mail | index | archive | help
This is on a CAM kernel, cvsup'd circa 6pm PDT. On bootstrap, syslogd just freezes and forced a hard reset. I've turned it off in my rc.conf for the time being. When I'm fully booted, I tried 'syslogd' at the root prompt, but it keeps telling me: syslogd: child pid NNN exited with status 1 Of course, I'll RTSL but hopefully someone has a faster clue? -scooter ** The other problem is why CAM can't attach the CD-ROM, but that's not stopping me from booting up... ------------------------------------------------------------------------- Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #5: Tue Sep 15 21:11:17 PDT 1998 scottm@mordred.cs.ucla.edu:/usr/src/sys/compile/MORDRED Timecounter "i8254" frequency 1193243 Hz cost 4331 ns Timecounter "TSC" frequency 233875498 Hz cost 111 ns CPU: AMD-K6tm w/ multimedia extensions (233.88-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x562 Stepping=2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67108864 (65536K bytes) avail memory = 62185472 (60728K bytes) Probing for devices on PCI bus 0: chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x01 on pci0.0.0 chip1: <PCI to PCI bridge (vendor=1106 device=8597)> rev 0x00 on pci0.1.0 chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0 chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3 vga0: <Matrox MGA 1024SG graphics accelerator> rev 0x03 int a irq 9 on pci0.8.0 ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 11 on pci0.10.0 Probing for devices on PCI bus 1: Probing for PnP devices: Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <8 virtual consoles, flags=0x0> ed0 at 0x240-0x25f irq 10 maddr 0xcc000 msize 16384 on isa ed0: address 00:00:c0:86:e3:b7, type SMC8216/SMC8216C (16 bit) psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x80 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 flags 0x80 on isa sio1: type 16550A pcm0 at 0x220 irq 5 drq 1 flags 0x15 on isa fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface changing root device to da0s2a da0 at ncr0 bus 0 target 0 lun 0 da0: <QUANTUM VIKING 4.5 NSE 880R> Fixed Direct Access SCSI2 device da0: 20.0MB/s transfers (20.0MHz, offset 16), Tagged Queueing Enabled da0: 4345MB (8899737 512 byte sectors: 255H 63S/T 553C) da1 at ncr0 bus 0 target 6 lun 0 da1: <IOMEGA ZIP 100 J.02> Removable Direct Access SCSI2 device da1: 3.300MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present cd0: fatal error: NOT READY, Logical unit not ready, manual intervention required -- failed to attach to device (cd0:ncr0:0:4:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ncr0:0:4:0): NOT READY asc:4,3 (cd0:ncr0:0:4:0): Logical unit not ready, manual intervention required ------------------------------------------------------------------------- machine "i386" ident MORDRED maxusers 10 cpu "I586_CPU" # aka Pentium(tm) options "NO_F00F_HACK" # 'cos we're AMD! options FAILSAFE options PQ_HUGECACHE options "COMPAT_43" options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" options DDB options DDB_UNATTENDED options KTRACE #kernel tracing #options DIAGNOSTIC options PERFMON options UCONSOLE options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options BOUNCE_BUFFERS options COMPAT_LINUX options "EXT2FS" options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options CLK_USE_TSC_CALIBRATION options PANIC_REBOOT_WAIT_TIME=10 options SCSI_CAM #options "SCSI_2_DEF" #options SCSI_DELAY=8 #options SCSI_NCR_DFLT_TAGS=8 options SHOW_BUSYBUFS config kernel root on da0 options INET #Internet communications protocols pseudo-device ether #Generic Ethernet pseudo-device loop #Network loopback device pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device disc #Discard device options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs #options MROUTING # Multicast routing options FFS #Fast filesystem options NFS #Network File System options FFS_ROOT #FFS usable as root device # The rest are optional: # options NFS_NOSERVER #Disable the NFS-server code. options "CD9660" #ISO 9660 filesystem options MFS #Memory File System options MSDOSFS #MS DOS File System options PROCFS #Process filesystem options SOFTUPDATES options NSWAPDEV=2 options QUOTA #enable disk quotas controller scbus0 #device sd0 #device cd0 device da0 # CAM SCSI "direct access" device cd0 device pass0 device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target options SCSI_REPORT_GEOMETRY options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" pseudo-device pty 16 #Pseudo ttys - can go as high as 256 pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device gzip #Exec gzipped a.out's # Size of the kernel message buffer. Should be N * pagesize. options "MSGBUF_SIZE=40960" controller isa0 controller pnp0 device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=8 # number of virtual consoles options "STD8X16FONT" # Compile font in makeoptions "STD8X16FONT"="cp850" options SC_HISTORY_SIZE=200 # number of history buffer lines device npx0 at isa? port "IO_NPX" irq 13 vector npxintr #device apm0 at isa? disable flags 0x31 controller ppbus0 device nlpt0 at ppbus? controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 flags 0x80 vector siointr device sio1 at isa? port "IO_COM2" tty flags 0x10 irq 3 flags 0x80 vector siointr device ed0 at isa? port 0x240 net irq 10 iomem 0xcc000 vector edintr #controller snd0 #device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr #device sbxvi0 at isa? port 0x300 drq 5 #device sbmidi0 at isa? port 0x388 # Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). # You may also wish to enable the pnp controller with this, for pnp # sound cards. device pcm0 at isa? port 0x220 tty irq 5 drq 1 flags 0x15 vector pcmintr controller pci0 controller ncr0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809160451.VAA00343>