Date: Wed, 4 Mar 1998 06:52:14 +1000 (EST) From: Andrew <perrya@python.shoal.net.au> To: Gang-Ryung Uh <uh@NU.CS.FSU.EDU> Cc: questions@FreeBSD.ORG Subject: Re: 2.2.5 Installation Message-ID: <Pine.BSI.3.95.980304064958.4937B-100000@python.shoal.net.au> In-Reply-To: <199803031304.IAA12487@xi.cs.fsu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
I would try removing a few things if you can in case their is a conflict. Or when you go through the visual kernel configuration get rid of everything you don't need for the install. just a thought Andrew Perry On Tue, 3 Mar 1998, Gang-Ryung Uh wrote: > Date: Tue, 3 Mar 1998 08:04:39 -0500 (EST) > From: Gang-Ryung Uh <uh@NU.CS.FSU.EDU> > To: questions@FreeBSD.ORG > Subject: 2.2.5 Installation > > Hello, > > Recently, I got a PC, MICRON millennia XKU. The following is the more > detailed information about the PC: > > Processor Type: Pentium II > Processor Speed: 266 MHz > Total Memory 64 MB > DISK 6449 MB > > CDROM -- SONY CD-ROM CDU771 > Disk Drives > -- Generic IDE DISK TYPE 40 > -- Generic NEC FLOPPY DISK > -- IOMEGA ZIP 100 > DISPLAY Adapters > -- Diamond Viper V330 > Floppy Disk Controller > -- Standard Floppy Disk Controller > Hard Disk Controllers > -- Interl 82371AB PCI Bus Master IDE Controller > -- Primary IDE controller (dual fifo) > -- Secondary IDE controller (dual info) > Keyboard > -- PC/AT Enhanced Keyboard (101/102 Key) > Modem > -- Sportster 56000 Fax Internal PNP > Mouse > -- Microsoft PS2 Mouse with Wheel > Network Adapters > -- 3Com Fast EtherLink XL 10/100Mb TX Ethernet Adapter > Ports > -- Communications Port (COM1) > -- Printer Port (LPT1) > Sound, video and game controllers > -- YAMAHA OPL3-SAx GamePort > -- YAMAHA OPL3-SAx Sound System > ... > USB > -- Interl 82371AB PCI to USB Universal Host Controller > -- USB Root Hub > > When I boot the system with FreeBSD 2.2.5 boot floppy, the installation > process hang after displaying messages as shown before. Even though I > resolved (?) the conflicts during the installation, I could not make > BSD installed on the PC that I can access. Any help or advise will > be appreciated. Thanks in advance. > > Regards, > Gang-Ryung Uh > > > ------------------- installation messages --------- > > avail memory = 61071350 (59640K bytes) > Probing for devices on PCI bus 0: > chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0 > chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1 > chip2 <generic PCI bridge (vendor=8086 device=7110 subclass=1)> rev 1 on pci0:7: > 0 > pci0:7:1: Intel Corporation, device=0x7111, class=storage (ide) [no driver assig > ned] > pci0:7:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 int d irq > 11 [no driver assigned] > chip3 <generic PCI bridge (vendor=8086 device=7113 subclass=128)> rev 1 on pci0: > 7:3 > vx0 <3COM 3C905 Fast Etherlink XL PCI> rev 0 int a irq 10 on pci0:13 > > HANG!!!!! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.95.980304064958.4937B-100000>