Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Jan 2003 19:09:50 -0500 (EST)
From:      Paul Halliday <dp@dove.penix.org>
To:        alpha@freebsd.org
Subject:   Signals.
Message-ID:  <20030130190402.L75026@dove.penix.org>

next in thread | raw e-mail | index | archive | help


Just a little collection from under 24 hours.

pid 203 (XFree86), uid 0: exited on signal 6 (core dumped)
pid 1640 (XFree86), uid 0: exited on signal 6 (core dumped)
pid 44317 (XFree86), uid 0: exited on signal 6 (core dumped)
pid 58026 (gkrellm), uid 0: exited on signal 11
pid 58488 (gkrellm), uid 0: exited on signal 11
swap_pager: indefinite wait buffer: device: #ad/1, blkno: 20512, size: 40960
pid 58342 (dillo), uid 0: exited on signal 11 (core dumped)
pid 59854 (cc1), uid 0: exited on signal 11 (core dumped)

Gkrellm cores all the time doesnt really seem to be a pattern, Xfree
usually once a day, cc1 quite often.

Can anyone suggest some 'things to try'


Thanks.

Info:

FreeBSD pandora.alpha.box 4.7-RELEASE FreeBSD 4.7-RELEASE #2: Thu Jan 30
14:59:10 AST 2003     root@pandora.alpha.box:/usr/src/sys/compile/PC164
alpha

Unrecognized boot flag '0'.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #2: Thu Jan 30 14:59:10 AST 2003
    root@pandora.alpha.box:/usr/src/sys/compile/PC164
EB164
Digital AlphaPC 164 500 MHz, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000800020117
real memory  = 265904128 (259672K bytes)
avail memory = 253050880 (247120K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000694000.
md0: Malloc disk
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
xl0: <3Com 3c900B-TPO Etherlink XL> port 0x10100-0x1017f mem
0x82845000-0x8284507f irq 2 at device 5
.0 on pci0
xl0: interrupting at CIA irq 2
xl0: Ethernet address: 00:50:04:a0:dc:2e
xl0: selecting 10baseT transceiver, half duplex
ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0x10000-0x100ff irq
1 at device 7.0 on pci0
ahc0: interrupting at CIA irq 1
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
isab0: <Intel 82378IB PCI to ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 9.0 irq 3
atapci0: <CMD 646 ATA controller> port 0x10180-0x1018f irq 5 at device
11.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppc0: interrupting at ISA irq 7
Timecounter "alpha"  frequency 500001000 Hz
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 14655MB <Maxtor 51536H2> [29777/16/63] at ata0-master WDMA2
ad1: 814MB <Maxtor 7850 AV> [1654/16/63] at ata0-slave PIO3
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0a


Paul Halliday.
http://dp.penix.org
-------------------


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030130190402.L75026>