Date: Mon, 10 Feb 2003 13:28:42 -0700 From: Darren Spruell <darren_spruell@sento.com> To: Shantanu Mahajan <shantanoo+fbsd@ieee.org> Cc: freebsd-questions@freebsd.org Subject: Re: X problems on i810 | AddScreen/ScreenInit failed Message-ID: <3E480B7A.3090805@sento.com> References: <20030210185635.GA694@dhumketu.homeunix.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Shantanu Mahajan wrote:
> try adding following lines
>
> in Device section
> Option "NoDDC"
>
> in Monitor section
> Option "DPMS"
>
> Regards,
> Shantanu
Added as suggested. Relevant sections now read:
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
VendorName "Gateway"
ModelName "EV700"
HorizSync 30 - 69
VertRefresh 50 - 110
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "VGAClocks" # [<bool>]
Option "NoDDC"
Identifier "Card0"
Driver "vga"
VendorName "Intel"
BoardName "i810-dc100"
BusID "PCI:0:1:0"
EndSection
Still the same error occurs. Here is the full output of the
/var/log/XFree86.0.log for this attempt:
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 5.0-CURRENT i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb 10 14:23:18 2003
(++) Using config file: "./XF86Config.new"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts
/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7122 card 0000,0000 rev 03 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,7123 card 8086,5355 rev 03 class 03,00,00
hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80
hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00
hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 8086,5355 rev 02 class 04,01,00
hdr 00
(II) PCI: 01:01:0: chip 8086,1229 card 8086,3002 rev 08 class 02,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x02 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xff400000 - 0xff8fffff (0x500000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xf6a00000 - 0xf6afffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:1:0) Intel i810-dc100 rev 3, Mem @ 0xf8000000/26, 0xffa80000/19
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E
[1] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E
[2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E
[5] -1 0x0000ef00 - 0x0000efff (0x100) IX[B]E
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
[7] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E
[8] -1 0x0000ef80 - 0x0000efff (0x80) IX[B]E
[9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) PCI I/O resource overlap reduced 0x0000ef00 from 0x0000efff to
0x0000ef7f
(II) PCI I/O resource overlap reduced 0x0000ef80 from 0x0000efff to
0x0000ef9f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E
[1] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E
[2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E
[5] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
[7] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E
[8] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
[9] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E
[6] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E
[7] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E
[12] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E
[13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
[14] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E
[15] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
[16] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
...skipping...
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x512" (insufficient memory for mode)
(II) VGA(0): Not using mode "1024x768" (no mode of this name)
(II) VGA(0): Not using mode "360x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x200" (no clock available for mode)
(II) VGA(0): Not using mode "320x175" (no clock available for mode)
(--) VGA(0): Virtual size is 416x312 (pitch 416)
(**) VGA(0): Default mode "416x312": 28.3 MHz, 49.2 kHz, 73.8 Hz (D)
(II) VGA(0): Modeline "416x312" 28.32 416 432 464 576 312 312 314
333 doublescan -hsync -vsync
(**) VGA(0): Default mode "400x300": 28.3 MHz, 54.0 kHz, 85.8 Hz (D)
(II) VGA(0): Modeline "400x300" 28.32 400 416 448 524 300 300 302
315 doublescan +hsync +vsync
(**) VGA(0): Default mode "400x300": 25.2 MHz, 48.4 kHz, 72.7 Hz (D)
(II) VGA(0): Modeline "400x300" 25.19 400 428 488 520 300 318 321
333 doublescan +hsync +vsync
(**) VGA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) VGA(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246
262 doublescan -hsync -vsync
(==) VGA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xffa80000 - 0xffafffff (0x80000) MS[B]
[1] 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xff700000 - 0xff7fffff (0x100000) MX[B]E
[8] -1 0xff8ff000 - 0xff8fffff (0x1000) MX[B]E
[9] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[10] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000df00 - 0x0000dfff (0x100) IX[B]E
[17] -1 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E
[18] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
[19] -1 0x0000efa0 - 0x0000efbf (0x20) IX[B]E
[20] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
[21] -1 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear
Fatal server error:
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
>
> +++ Darren Spruell [freebsd] [10-02-03 11:07 -0700]:
> | Date: Mon, 10 Feb 2003 11:07:22 -0700
> | From: Darren Spruell <darren_spruell@sento.com>
> | Subject: X problems on i810 | AddScreen/ScreenInit failed
> |
> | Greetz,
> |
> | I'm trying to configure v4.7 to run X but am having a hard time getting
> | the server to start.
> |
> | I've followed the config instructions at
> | http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html
> | by doing the following steps:
> |
> | Run XFree86 -configure
> | to create the default XF86Config.new
> | Run XFree86 -xf86config ./XF86Config.new
> | to ensure that it works w/my hardware
> | Edit it to taste, to change specifics for HorizSync, VertRefresh, and
> | the Display subsection under "Screen".
> |
> | However, running 'XFree86 -xf86config ./XF86Config.new' after changing
> | my config does not work. The output error is:
> |
> | ======================================================================
> | (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear
> |
> | Fatal server error:
> | AddScreen/ScreenInit failed for driver 0
> | ======================================================================
> |
> | I followed through the part in the Advanced Configuration section about
> | adding in support for agpgart and created the device node and added the
> | following to /boot/loader.conf:
> | agp_load="YES"
> |
> | dmesg now shows:
> | Preloaded elf module "agp.ko" at 0xc051a09c.
> | agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem
> | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
> |
> | Here is the current XF86Config.new (non-working). The Monitor section
> | was taken from a specs page on the Monitor (Gateway EV700). Full dmesg
> | included below this:
> |
> | Section "ServerLayout"
> | Identifier "XFree86 Configured"
> | Screen 0 "Screen0" 0 0
> | InputDevice "Mouse0" "CorePointer"
> | InputDevice "Keyboard0" "CoreKeyboard"
> | EndSection
> |
> | Section "Files"
> | RgbPath "/usr/X11R6/lib/X11/rgb"
> | ModulePath "/usr/X11R6/lib/modules"
> | FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> | FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> | FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> | FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> | FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> | EndSection
> |
> | Section "Module"
> | Load "dbe"
> | Load "dri"
> | Load "extmod"
> | Load "glx"
> | Load "pex5"
> | Load "record"
> | Load "xie"
> | Load "xtrap"
> | Load "speedo"
> | Load "type1"
> | EndSection
> |
> | Section "InputDevice"
> | Identifier "Keyboard0"
> | Driver "keyboard"
> | EndSection
> |
> | Section "InputDevice"
> | Identifier "Mouse0"
> | Driver "mouse"
> | Option "Protocol" "MouseSystems"
> | Option "Device" "/dev/sysmouse"
> | EndSection
> |
> | Section "Monitor"
> | Identifier "Monitor0"
> | VendorName "Gateway"
> | ModelName "EV700"
> | HorizSync 30 - 69
> | VertRefresh 50 - 110
> | EndSection
> |
> | Section "Device"
> | ### Available Driver options are:-
> | ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> | ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> | ### [arg]: arg optional
> | #Option "ShadowFB" # [<bool>]
> | #Option "VGAClocks" # [<bool>]
> | Identifier "Card0"
> | Driver "vga"
> | VendorName "Intel"
> | BoardName "i810-dc100"
> | BusID "PCI:0:1:0"
> | EndSection
> |
> | Section "Screen"
> | Identifier "Screen0"
> | Device "Card0"
> | Monitor "Monitor0"
> | DefaultDepth 16
> | SubSection "Display"
> | Depth 16
> | Modes "1024x768"
> | EndSubSection
> | EndSection
> |
> | Copyright (c) 1992-2002 The FreeBSD Project.
> | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> | The Regents of the University of California. All rights reserved.
> | FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
> | root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
> | Timecounter "i8254" frequency 1193182 Hz
> | CPU: Pentium III/Pentium III Xeon/Celeron (697.88-MHz 686-class CPU)
> | Origin = "GenuineIntel" Id = 0x686 Stepping = 6
> |
> | Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> | real memory = 267124736 (260864K bytes)
> | avail memory = 254693376 (248724K bytes)
> | Preloaded elf kernel "kernel" at 0xc051a000.
> | Preloaded elf module "agp.ko" at 0xc051a09c.
> | Pentium Pro MTRR support enabled
> | md0: Malloc disk
> | Using $PIR table, 11 entries at 0xc00f35a0
> | npx0: <math processor> on motherboard
> | npx0: INT 16 interface
> | pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on
> | motherboard
> | pci0: <PCI bus> on pcib0
> | agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem
> | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
> | pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
> | pci1: <PCI bus> on pcib1
> | fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem
> | 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 3 at device 1.0 on pci1
> | fxp0: Ethernet address 00:03:47:0b:0e:20
> | inphy0: <i82555 10/100 media interface> on miibus0
> | inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> | isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
> | isa0: <ISA bus> on isab0
> | atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1
> | on pci0
> | ata0: at 0x1f0 irq 14 on atapci0
> | ata1: at 0x170 irq 15 on atapci0
> | uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at
> | device 31.2 on pci0
> | usb0: <Intel 82801AA (ICH) USB controller> on uhci0
> | usb0: USB revision 1.0
> | uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> | uhub0: 2 ports with 2 removable, self powered
> | pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
> | chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
> | 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
> | orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xccfff on isa0
> | fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> | fdc0: FIFO enabled, 8 bytes threshold
> | fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> | atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> | atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> | kbd0 at atkbd0
> | psm0: failed to get data.
> | psm0: <PS/2 Mouse> irq 12 on atkbdc0
> | psm0: model IntelliMouse, device ID 3
> | vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> | sc0: <System console> at flags 0x100 on isa0
> | sc0: VGA <16 virtual consoles, flags=0x300>
> | sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> | sio0: type 16550A
> | sio1: configured irq 3 not in bitmap of probed irqs 0
> | ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> | ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> | ppc0: FIFO with 16/16/8 bytes threshold
> | plip0: <PLIP network interface> on ppbus0
> | lpt0: <Printer> on ppbus0
> | lpt0: Interrupt-driven port
> | ppi0: <Parallel I/O> on ppbus0
> | ad0: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-master UDMA66
> | acd0: MODE_SENSE_BIG trying to write on read buffer
> | acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
> | acd0: CDROM <CD-224E> at ata1-slave PIO4
> | Mounting root from ufs:/dev/ad0s1a
> | WARNING: / was not properly dismounted
> |
> |
> | THANKS IN ADVANCE!!!
> |
> | - --
> | Darren Spruell
> | Sento IS Department
> | darren_spruell@sento.com
> |
> | ------------------------------
> |
> | End of questions-digest V5 #1894
> | ********************************
> |
> | To Unsubscribe: send mail to majordomo@FreeBSD.org
> | with unsubscribe freebsd-questions-digest in the body of the message
>
--
Darren Spruell
Sento IS Department
darren_spruell@sento.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E480B7A.3090805>