Date: Fri, 10 Oct 2003 12:11:54 +0200 (CEST) From: NEPHTALI Aurelien <aurelien.nephtali@wanadoo.fr> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/57829: ACPI problems (Battery, Mouse probe) Message-ID: <200310101011.h9AABsbb000628@nebula.wanadoo.fr> Resent-Message-ID: <200310101020.h9AAKJ9o012436@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 57829
>Category: kern
>Synopsis: ACPI problems (Battery, Mouse probe)
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Oct 10 03:20:19 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: dak
>Release: FreeBSD 5.1-CURRENT i386
>Organization:
none
>Environment:
System: FreeBSD nebula.wanadoo.fr 5.1-CURRENT FreeBSD 5.1-CURRENT #54: Fri Oct 10 11:23:45 CEST 2003 dak@nebula.wanadoo.fr:/usr/src/sys/i386/compile/NEBULA i386
Compaq Presario 2157 (laptop)
>Description:
When ACPI is enabled, mouse isn't probed. A boot -v says:
psm0: cannot allocate IRQ
If ACPI is disabled, mouse works fine.
The second problem concerns ACPI itself, battery handling doesn't
seem to work at all (sysctl shows -1 values) and at boot:
acpi_cmbat0: battery initialization start
then
acpi_cmbat0: battery initialization failed, giving up
dmesg shot:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #54: Fri Oct 10 11:23:45 CEST 2003
dak@nebula.wanadoo.fr:/usr/src/sys/i386/compile/NEBULA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07a6000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07a6250.
Calibrating clock(s) ... i8254 clock: 1193131 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1993727564 Hz
CPU: Mobile Intel(R) Celeron(R) CPU 2.00GHz (1993.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 200736768 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000bbebfff, 188506112 bytes (46022 pages)
avail memory = 189517824 (180 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c60
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x14b
pnpbios: Found PnP BIOS data at 0xc00f6cc0
pnpbios: Entry = f0000:aff0 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 03 00 01 0d 01 00 01 23 01 00 01 28 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 65472k memory, flags:0x1, mode table:0xc06d9682 (1000022)
VESA: ATI RS200M
VESA: ATI Technologies Inc. MS2 01.00
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80012814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab21002)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 7 10
embedded 0 2 A 0x09 7 10
embedded 0 8 A 0x07 7 10
embedded 0 6 A 0x08 5
embedded 0 9 A 0x04 7 10
embedded 0 9 B 0x03 7 10
embedded 0 10 A 0x06 7 11
embedded 0 18 A 0x02 7 10
embedded 0 12 A 0x06 7 11
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
unknown: I/O range not supported
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK8 irq 10: [ 7 10] low,level,sharable 0.2.0
\\_SB_.PCI0.ISA_.LNK6 irq 0: [ 7 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0
\\_SB_.PCI0.ISA_.LNK3 irq 0: [ 7 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq 0: [ 7 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK6:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 0
\\_SB_.PCI0.ISA_.LNK3:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 0
\\_SB_.PCI0.ISA_.LNK2:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK6:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 930
\\_SB_.PCI0.ISA_.LNK3:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 930
\\_SB_.PCI0.ISA_.LNK2:
interrupts: 7 10
penalty: 1330 530
references: 1
priority: 930
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK8 irq 10: [ 7 10] low,level,sharable 0.2.0
\\_SB_.PCI0.ISA_.LNK6 irq 10: [ 7 10] low,level,sharable 0.8.0
\\_SB_.PCI0.ISA_.LNK7 irq 5: [ 5] low,level,sharable 0.6.0
\\_SB_.PCI0.ISA_.LNK1 irq 10: [ 7 10] low,level,sharable 0.18.0
\\_SB_.PCI0.ISA_.LNK3 irq 10: [ 7 10] low,level,sharable 0.9.0
\\_SB_.PCI0.ISA_.LNK2 irq 10: [ 7 10] low,level,sharable 0.9.1
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.12.0
\\_SB_.PCI0.ISA_.LNK5 irq 11: [ 7 11] low,level,sharable 0.10.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d4000000, size 26, enabled
map[14]: type 3, range 32, base d0005000, size 12, enabled
found-> vendor=0x1002, dev=0xcab2, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7010, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base d0000000, size 12, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.ISA_.LNK8)
pcib0: slot 2 INTA is routed to irq 10
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001000, size 8, enabled
map[14]: type 1, range 32, base d0001000, size 12, memory disabled
pcib0: matched entry for 0.6.INTA (source \\_SB_.PCI0.ISA_.LNK7)
pcib0: slot 6 INTA is routed to irq 5
found-> vendor=0x10b9, dev=0x5451, revid=0x02
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base d0002000, size 12, memory disabled
map[14]: type 4, range 32, base 00001400, size 8, port disabled
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base d0003000, size 12, memory disabled
found-> vendor=0x1217, dev=0x6972, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00002000, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
bus=0, slot=16, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 32, base d0004000, size 12, enabled
pcib0: matched entry for 0.18.INTA (source \\_SB_.PCI0.ISA_.LNK1)
pcib0: slot 18 INTA is routed to irq 10
found-> vendor=0x100b, dev=0x0020, revid=0x00
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x5a (2700 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd0300000-0xd03fffff
pcib1: prefetched decode 0xd8000000-0xdfffffff
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNK0 irq 0: [ 7 10] low,level,sharable 1.5.0
---- before setting priority for links ------------
\\_SB_.PCI0.ISA_.LNK0:
interrupts: 7 10
penalty: 1440 940
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.ISA_.LNK0:
interrupts: 7 10
penalty: 1440 940
references: 1
priority: 1190
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNK0 irq 10: [ 7 10] low,level,sharable 1.5.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d8000000, size 27, enabled
map[14]: type 4, range 32, base 00009000, size 8, enabled
map[18]: type 1, range 32, base d0300000, size 16, enabled
found-> vendor=0x1002, dev=0x4337, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000000-0xd0000fff irq 10 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xd0001000-0xd0001fff irq 5 at device 6.0 on pci0
pcm0: <Conexant CX20468 AC97 Codec (id = 0x43585429)>
pcm0: Codec features reserved, headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 23f000, 1000; 0xc232b000 -> 23f000
pcm0: sndbuf_setmap 21c000, 1000; 0xc2328000 -> 21c000
pcm0: sndbuf_setmap 23a000, 1000; 0xc2326000 -> 23a000
pcm0: sndbuf_setmap 238000, 1000; 0xc2324000 -> 238000
pcm0: sndbuf_setmap 236000, 1000; 0xc2322000 -> 236000
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xd0003000-0xd0003fff at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.ISA_.LNK5)
pcib0: slot 10 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x69721217 0x04100007 0x06070000 0x00024000
0x10: 0xd0003000 0x020000a0 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010b
0x40: 0x002a103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01881882
0x90: 0x00008002 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000011
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x2000-0x200f at device 16.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x2400-0x24ff mem 0xd0004000-0xd0004fff irq 10 at device 18.0 on pci0
sis0: Silicon Revision: DP83816A
sis0: Ethernet address: 00:0b:cd:a7:1b:f2
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
unknown: not probed (disabled)
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 3 us
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdf000-0xdffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 49 8b 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 49 8b 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1993727564 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET initialized (011031)
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_ec0: info: new max delay is 9 us
acpi_cmbat0: battery initialization start
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ad0: setting UDMA100 on AcerLabs Aladdin chip
GEOM: create disk ad0 dp=0xc236d170
ad0: <HITACHI_DK23EA-30/00K4A0A2> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
acpi_ec0: info: new max delay is 11000 us
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=80pin
acd0: setting PIO4 on AcerLabs Aladdin chip
acd0: <TOSHIBA DVD-ROM SD-R2312/1905> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm audio disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:28675962
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:28676025 l:29929095
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 14682092544 end 14682124799
GEOM: Configure ad0s2, start 14682124800 length 15323696640 end 30005821439
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 385400832 end 519618559
GEOM: Configure ad0s2c, start 0 length 15323696640 end 15323696639
GEOM: Configure ad0s2e, start 519618560 length 268435456 end 788054015
GEOM: Configure ad0s2f, start 788054016 length 268435456 end 1056489471
GEOM: Configure ad0s2g, start 1056489472 length 14267207168 end 15323696639
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: fade_saver
acpi_cmbat0: battery initialization failed, giving up
>How-To-Repeat:
Enable ACPI on a Compaq Presario 2157 (or just don't disable it since
it's enabled by default :>)
>Fix:
None.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200310101011.h9AABsbb000628>