From owner-cvs-all Tue Oct 10 11: 9: 5 2000 Delivered-To: cvs-all@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 7CB8537B66D; Tue, 10 Oct 2000 11:08:49 -0700 (PDT) Received: from zeppo.feral.com (IDENT:mjacob@zeppo [192.67.166.71]) by feral.com (8.9.3/8.9.3) with ESMTP id LAA24084; Tue, 10 Oct 2000 11:08:09 -0700 Date: Tue, 10 Oct 2000 11:05:17 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Wilko Bulte Cc: John Baldwin , Andrew Gallatin , cvs-all@FreeBSD.org, cvs-committers@FreeBSD.org Subject: Re: cvs commit: src/sys/alpha/alpha ipl_funcs.c In-Reply-To: <20001010200606.A8244@freebie.demon.nl> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-cvs-all@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG YMMV mucho...I just had done a clean rebuild/reboot, and my PC164 doesn't come up but instead I get (below)- slowly getting up. This is fascinating. It's almost as if the ithread scheduler is really broken and only occasionally let's a thread run: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting fdc 0 at to isa (string) Setting fdc 0 drq to 2 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 port to 1008 (int) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting sc 0 at to isa (string) Setting sio 0 at to isa (string) Setting sio 0 irq to 4 (int) Setting sio 0 port to 1016 (int) Setting sio 1 at to isa (string) Setting sio 1 flags to 80 (int) Setting sio 1 irq to 3 (int) Setting sio 1 port to 760 (int) Setting vga 0 at to isa (string) FreeBSD 5.0-CURRENT #0: Tue Oct 10 09:15:53 PDT 2000 mjacob@farrago.feral.com:/tstsys/compile/FARRAGO EB164 Digital AlphaPC 164 432 MHz, 432MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=1 extensions=0x1 OSF PAL rev: 0x1000800020117 real memory = 265904128 (259672K bytes) Physical memory chunk(s): 0x006d4000 - 0x0ff0dfff, 260284416 bytes (31773 pages) avail memory = 252542976 (246624K bytes) Preloaded elf kernel "kernel" at 0xfffffc00006b4000. Preloaded elf module "ispfw.ko" at 0xfffffc00006b40c0. null: random: mem: cia0: <2117x Core Logic chipset> cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 21 pcib0: <2117x PCI host bus adapter> on cia0 pci0: physical bus=0 found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=5, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=2 map[10]: type 4, range 32, base 00010200, size 8, enabled map[14]: type 1, range 32, base 82082000, size 12, enabled found-> vendor=0x1077, dev=0x1080, revid=0x01 bus=0, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[10]: type 4, range 32, base 00010100, size 8, enabled map[14]: type 1, range 32, base 82081000, size 12, enabled found-> vendor=0x1077, dev=0x2200, revid=0x05 bus=0, slot=7, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=1 map[10]: type 4, range 32, base 00010000, size 8, enabled map[14]: type 1, range 32, base 82080000, size 12, enabled found-> vendor=0x8086, dev=0x0484, revid=0x43 bus=0, slot=8, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1011, dev=0x0009, revid=0x22 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 4, range 32, base 00010300, size 7, enabled map[14]: type 1, range 32, base 82083000, size 7, enabled found-> vendor=0x1095, dev=0x0646, revid=0x01 bus=0, slot=11, func=0 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[20]: type 4, range 32, base 00010380, size 4, enabled pci0: on pcib0 Qlogic ISP Driver, FreeBSD Version 5.4, Core Version 2.0 isp0: port 0x10200-0x102ff mem 0x82082000-0x82082fff irq 2 at device 5.0 on pci0 isp0: using Memory space register mapping isp0: interrupting at CIA irq 2 isp0: Ultra Mode Capable isp0: Board Revision 1040B, loaded F/W Revision 4.65.0 isp0: Last F/W revision was 5.57.1 isp1: port 0x10100-0x101ff mem 0x82081000-0x82081fff irq 0 at device 6.0 on pci0 isp1: using Memory space register mapping isp1: interrupting at CIA irq 0 isp1: bus 0 is in LVD Mode isp1: Board Revision 1080, loaded F/W Revision 8.13.0 isp2: port 0x10000-0x100ff mem 0x82080000-0x82080fff irq 1 at device 7.0 on pci0 isp2: using Memory space register mapping isp2: interrupting at CIA irq 1 isp2: Board Revision 2200, loaded F/W Revision 2.1.14 isp2: NVRAM Port WWN 0x210000e08b01ae8b isab0: at device 8.0 on pci0 Bus Modes: Bus Park, Resource Lock, Configuration RAM: 0C00h,0800h-08FFh Port 92: enabled isa0: on isab0 pci0: (vendor=0x1011, dev=0x0009) at 9.0 irq 3 atapci0: port 0x10380-0x1038f irq 5 at device 11.0 on pci0 atapci0: Busmastering DMA enabled ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x10380 ata0: mask=03 status0=51 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: interrupting at ISA irq 14 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x10388 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 433008048 Hz (firmware 432900432 Hz) i8254 clock: 1192009 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency ppc0 failed to probe at irq 7 on isa0 sc0: no video adapter is found. sc0: failed to probe on isa0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 vga0: failed to probe on isa0 sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices Timecounter "i8254" frequency 1193182 Hz Timecounter "alpha" frequency 433008048 Hz bpf: lo0 attached ata0-master: success setting WDMA2 on CMD chip ad0: ATA-4 disk at ata0-master ad0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Waiting 2 seconds for SCSI devices to settle isp0: 0.2 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.2 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.2 set current period 0xc offset 0x8 flags 0xfd00 isp0: 0.9 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.9 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.9 set current period 0xc offset 0x8 flags 0xfd00 Creating DISK da0 Creating DISK da1 Creating DISK da2 Creating DISK da3 Creating DISK da4 Creating DISK da5 Creating DISK da6 Creating DISK da7 Creating DISK da8 Creating DISK da9 Creating DISK da10 Creating DISK da11 Creating DISK da12 Creating DISK da13 Creating DISK da14 Creating DISK da15 Creating DISK da16 Creating DISK da17 Creating DISK da18 Creating DISK da19 pass0 at isp0 bus 0 target 2 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number LN164807000018410A1M isp0: 0.2 get current period 0xc offset 0x8 flags 0xfd00 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at isp0 bus 0 target 9 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number HD0522910GP1U1 isp0: 0.9 get current period 0xc offset 0x8 flags 0xfd00 pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass2 at isp2 bus 0 target 0 lun 0 pass2: < > Fixed Direct Access SCSI-0 device pass2: 100.000MB/s transfers pass3 at isp2 bus 0 target 0 lun 1 pass3: < > Fixed Direct Access SCSI-0 device pass3: 100.000MB/s transfers pass4 at isp2 bus 0 target 0 lun 2 pass4: < > Fixed Direct Access SCSI-0 device pass4: 100.000MB/s transfers pass5 at isp2 bus 0 target 0 lun 3 pass5: < > Fixed Direct Access SCSI-0 device pass5: 100.000MB/s transfers pass6 at isp2 bus 0 target 0 lun 4 pass6: < > Fixed Direct Access SCSI-0 device pass6: 100.000MB/s transfers pass7 at isp2 bus 0 target 0 lun 5 pass7: < > Fixed Direct Access SCSI-0 device pass7: 100.000MB/s transfers pass8 at isp2 bus 0 target 0 lun 6 pass8: < > Fixed Direct Access SCSI-0 device pass8: 100.000MB/s transfers pass9 at isp2 bus 0 target 0 lun 7 pass9: < > Fixed Direct Access SCSI-0 device pass9: 100.000MB/s transfers pass10 at isp2 bus 0 target 16 lun 0 pass10: Fixed Direct Access SCSI-2 device pass10: Serial Number LP21423900001907191R pass10: 100.000MB/s transfers, Tagged Queueing Enabled pass11 at isp2 bus 0 target 17 lun 0 pass11: Fixed Direct Access SCSI-2 device pass11: Serial Number LP061822000019071808 pass11: 100.000MB/s transfers, Tagged Queueing Enabled pass12 at isp2 bus 0 target 18 lun 0 pass12: Fixed Direct Access SCSI-2 device pass12: Serial Number LP159124000019072C69 pass12: 100.000MB/s transfers, Tagged Queueing Enabled pass13 at isp2 bus 0 target 19 lun 0 pass13: Fixed Direct Access SCSI-2 device pass13: Serial Number LP178241000019072AX4 pass13: 100.000MB/s transfers, Tagged Queueing Enabled pass14 at isp2 bus 0 target 20 lun 0 pass14: Fixed Direct Access SCSI-2 device pass14: Serial Number LP16582800001907192A pass14: 100.000MB/s transfers, Tagged Queueing Enabled pass15 at isp2 bus 0 target 21 lun 0 pass15: Fixed Direct Access SCSI-2 device pass15: Serial Number 3AL0A7XP00001952HJN6 pass15: 100.000MB/s transfers, Tagged Queueing Enabled pass16 at isp2 bus 0 target 22 lun 0 pass16: Fixed Direct Access SCSI-2 device pass16: Serial Number 3AL0A7T900001952HQSF pass16: 100.000MB/s transfers, Tagged Queueing Enabled pass17 at isp2 bus 0 target 23 lun 0 pass17: Fixed Direct Access SCSI-2 device pass17: Serial Number 3AL0A7W5000019461C4F pass17: 100.000MB/s transfers, Tagged Queueing Enabled pass18 at isp2 bus 0 target 24 lun 0 pass18: Fixed Direct Access SCSI-2 device pass18: Serial Number 3AL0A7Z500001952HKAS pass18: 100.000MB/s transfers, Tagged Queueing Enabled pass19 at isp2 bus 0 target 25 lun 0 pass19: Fixed Direct Access SCSI-2 device pass19: Serial Number 3AL0A7XW00001952HJAD pass19: 100.000MB/s transfers, Tagged Queueing Enabled da0 at isp0 bus 0 target 2 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number LN164807000018410A1M isp0: 0.2 get current period 0xc offset 0x8 flags 0xfd00 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at isp0 bus 0 target 9 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number HD0522910GP1U1 isp0: 0.9 get current period 0xc offset 0x8 flags 0xfd00 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe cvs-all" in the body of the message