Date: Fri, 4 Feb 2005 16:51:53 -0600 From: Karl Denninger <karl@denninger.net> To: freebsd-stable@freebsd.org Subject: Bizarre errors and hangs with Buslink SATA adapter Message-ID: <20050204165153.A766@denninger.net>
next in thread | raw e-mail | index | archive | help
Hi folks;
Here's an odd one...
FreeBSD 5.3-STABLE #1: Wed Feb 2 22:57:48 CST 2005 karl@FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP
Sources from 1/30/05
Only options in the kernel file are for SMP, PPS_SYNC, and the Comtrol
Rocketports (all of which are working ok)
I get the following on boot:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Wed Feb 2 22:57:48 CST 2005
karl@FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 267862016 (255 MB)
avail memory = 252456960 (240 MB)
ACPI APIC Table: <DELL PE400SC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE400SC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
atapci0: <SiI 3112 SATA150 controller> port 0xdd70-0xdd7f,0xdd5c-0xdd5f,0xdd68-0xdd6f,0xdd58-0xdd5b,0xdd60-0xdd67 mem 0xfe9dee00-0xfe9defff irq 22 at device 1.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
rp0: <RocketPort PCI> port 0xdd80-0xddbf irq 17 at device 2.0 on pci2
RocketPort0 (Version 3.02) 4 ports.
pcib3: <PCI-PCI bridge> at device 3.0 on pci2
pci3: <PCI bus> on pcib3
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xcf80-0xcf9f mem 0xfcd00000-0xfcdfffff,0xf8001000-0xf8001fff irq 19 at device 4.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:b7:6f:ce:e8
fxp1: <Intel 82558 Pro/100 Ethernet> port 0xcfe0-0xcfff mem 0xfce00000-0xfcefffff,0xf8000000-0xf8000fff irq 18 at device 5.0 on pci3
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:d0:b7:6f:ce:e9
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xddc0-0xddff mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci2
em0: Ethernet address: 00:0c:f1:c9:df:c5
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xce000-0xcffff,0xcc800-0xcdfff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
RTC BIOS diagnostic error 18<memory_size,fixed_disk>
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
acd0: CDROM <Lite-On LTN486S 48x Max/YDS6> at ata1-master UDMA33
ad4: 238475MB <HDS722525VLSA80/V36OA63A> [484521/16/63] at ata2-master SATA150
em0: Link is up 100 Mbps Full Duplex
ad8: 239372MB <Maxtor 6B250S0/BANC1980> [486344/16/63] at ata4-master SATA150
ad10: 238475MB <HDS722525VLSA80/V36OA63A> [484521/16/63] at ata5-master SATA150
GEOM_MIRROR: Device boot created (id=1131801609).
GEOM_MIRROR: Device boot: provider ad8s1 detected.
GEOM_MIRROR: Device boot: provider ad10s1 detected.
GEOM_MIRROR: Device boot: provider ad10s1 activated.
GEOM_MIRROR: Device boot: provider mirror/boot launched.
GEOM_MIRROR: Device boot: rebuilding provider ad8s1.
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/mirror/boota
em0: Link is up 100 Mbps Full Duplex
Up to here all looks normal, and good.
But now the problem, immediately following, appears...
ad4: FAILURE - unknown CMD (0xb0) status=51<READY,DSC,ERROR> error=4<ABORTED>
If I attempt to boot with this disk (ad4) in the GEOM mirror configuration,
the system hangs as soon as it activates the mirror, and when I reboot after
that both ad4 and one of the other mirrored disks is inconsistent.
If not, I get the above "FAILURE" line - I assume they're connected.
If I want until the system is up, and then "insert" it into the mirror, it
seems to behave ok. I have not, however, allowed it to complete the
rebuild and stress it significantly.
Any ideas? This card is supposedly one of the ones with the "hot
swap-capable" chipset; I am attempting to end up with a configuration
where I can do "hot backups" to a third disk by inserting it, allowing
it to sync, then detaching it and putting it away (e.g. in a safety
deposit box)
The card is a Buslink SATA 150, claims to support internal RAID 0 and 1
(although I'm not using that capability), and as its salient point, has
an external connector for the outside disk.
I'm not quite sure what's going on here, but clearly its bad news from
a stability standpoint - the 2-disk mirror setup has been chugging along
even under "make -j8 buildworld" along with the usual production load
quite happily.
If its just a matter of needing a different adapter, I can try that..
if I can find another one with an external connection!
--
--
Karl Denninger (karl@denninger.net) Internet Consultant & Kids Rights Activist
http://www.denninger.net My home on the net - links to everything I do!
http://scubaforum.org Your UNCENSORED place to talk about DIVING!
http://www.spamcuda.net SPAM FREE mailboxes - FREE FOR A LIMITED TIME!
http://genesis3.blogspot.com Musings Of A Sentient Mind
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050204165153.A766>