Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Dec 2016 22:51:33 +0100
From:      Erwan Legrand <freebsd@erwanlegrand.com>
To:        Vladislav Prodan <universite@ukr.net>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: ZFS mount fails after upgrade to 11.0
Message-ID:  <CA%2B4G5KaeuoEyNz8SSKLyGSyROXDRWLJ2Vr4oomR0TK4DkCqgpg@mail.gmail.com>
In-Reply-To: <1482008447.788498772.101qcjaz@frv34.fwdcdn.com>
References:  <CA%2B4G5Kantxu%2BCH86VV3by4RRYRGBaV%2BGTR45z7X01%2BAED0CsOQ@mail.gmail.com> <1482008447.788498772.101qcjaz@frv34.fwdcdn.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Vladislav,

On Sat, Dec 17, 2016 at 10:07 PM, Vladislav Prodan <universite@ukr.net> wrote:
> Compare the list of modules in the /boot/kernel and /boot/kernel.old
> Show output: zpool status

I will compare the list of modules is at the end of this message. (The
lists are quite long.) I noticed that some GEOM modules have been
removed. (While the zfs and opensolaris modules exist in both
directories.)

Here is the output of zpool status:

"""
% zpool status
  pool: tank
 state: ONLINE
status: One or more devices are configured to use a non-native block size.
        Expect reduced performance.
action: Replace affected devices with devices that support the
        configured block size, or migrate data to a properly configured
        pool.
  scan: resilvered 103G in 0h45m with 0 errors on Fri Dec 16 22:47:06 2016
config:

        NAME                        STATE     READ WRITE CKSUM
        tank                        ONLINE       0     0     0
          mirror-0                  ONLINE       0     0     0
            diskid/DISK-Z1E75J4Kp2  ONLINE       0     0     0  block
size: 512B configured, 4096B native
            diskid/DISK-Z1E7725Jp2  ONLINE       0     0     0  block
size: 512B configured, 4096B native

errors: No known data errors
"""

The following modules are in /boot/kernel.old and not in /boot/kernel:
ahc_eisa.ko
aio.ko
dtnfsclient.ko
geom_bsd.ko
geom_fox.ko
geom_mbr.ko
geom_pc98.ko
geom_sunlabel.ko
geom_uncompress.ko
geom_vol_ffs.ko
if_ef.ko
if_faith.ko
if_ixgbe.ko
if_nve.ko
iw_cxgb.ko
iw_cxgbe.ko
krping.ko
lindev.ko
lockstat.ko
nfs_common.ko
nfsclient.ko
nfsserver.ko
ng_fec.ko
random.ko
reiserfs.ko

While these modules are in /boot/kernel and not in /boot/kernel.old:
bcma.ko
bcma_bhndb.ko
bhnd.ko
bhnd_chipc.ko
bhnd_pci.ko
bhnd_pci_hostb.ko
bhnd_pcib.ko
bhndb.ko
bhndb_pci.ko
callout_test.ko
cc_dctcp.ko
cloudabi.ko
cloudabi64.ko
cuse.ko
cxgbei.ko
cyapa.ko
g_audio.ko
g_keyboard.ko
g_modem.ko
g_mouse.ko
gpiobus.ko
gpioiic.ko
gpioled.ko
gpiospi.ko
gsched_delay.ko
if_bwn_pci.ko
if_cs.ko
if_enc.ko
if_ep.ko
if_fe.ko
if_iwm.ko
if_otus.ko
if_rtwn.ko
if_ure.ko
if_xe.ko
ig4.ko
ioat.ko
isl.ko
iwm3160fw.ko
iwm7260fw.ko
iwm7265fw.ko
iwm8000Cfw.ko
iwn100fw.ko
iwn105fw.ko
iwn135fw.ko
iwn2000fw.ko
kern_testfrwk.ko
linuxkpi.ko
mdio.ko
nctgpio.ko
otusfw_init.ko
otusfw_main.ko
ow.ko
ow_temp.ko
owc.ko
padlock_rng.ko
proto.ko
random_OTHER.ko
random_fortuna.ko
random_yarrow.ko
rdrand_rng.ko
rtwn-rtl8192cfwU.ko
rtwn-rtl8192cfwU_B.ko
si.ko
siba.ko
siba_bhndb.ko
udl.ko
ugold.ko
videomode.ko

Thanks,

Erwan



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2B4G5KaeuoEyNz8SSKLyGSyROXDRWLJ2Vr4oomR0TK4DkCqgpg>