Date: Thu, 08 Sep 2005 09:44:14 +0100 From: "tonix (Antonio Nati)" <tonix@interazioni.it> To: freebsd-scsi@freebsd.org Subject: Re: camcontrol and IDAD0 Message-ID: <6.2.3.4.0.20050908094033.04dd4af8@pop.ufficiopostale.it> In-Reply-To: <20050907133856.C84118@sasami.jurai.net> References: <6.2.3.4.0.20050901172618.0532ecb0@pop.ufficiopostale.it> <20050906084747.A84118@sasami.jurai.net> <6.2.3.4.0.20050907153854.04c36bc8@pop.ufficiopostale.it> <6.2.3.4.0.20050907163520.05554a30@pop.ufficiopostale.it> <6.2.3.4.0.20050907164953.0548c070@pop.ufficiopostale.it> <20050907133856.C84118@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 18.41 07/09/2005, you wrote: Ah, yes. I believe you've run into a firmware crash. >Make sure your cards have the latest firmware running. Is this FreeBSD 5.4 ida driver the latest version or is there any linux version more updated? >I've seen cases where hot swapping drives causes the firmware to >reset and lock up (based on the LED pattern of the diagnostic lights >on my cards.) > >I added command timeout detection to the driver as a means of >detecting this condition. I don't have any good leads on >recovinging from it though as my test hardware failed and I haven't >replaced it yet. I can give you full remote access on my machine (using Remote Insight Card) and you can make what you want (it's a DL360 G1 with a Integrated Smart Array and double disks; I can add also a 4200 controller if you want). Tonino >-- >10 40 80 C0 00 FF FF FF FF C0 00 00 00 00 10 AA AA 03 00 00 00 08 00
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20050908094033.04dd4af8>