Date: Thu, 02 Dec 1999 00:49:24 -0500 From: Greg Childers <gchil0@pop.uky.edu> To: freebsd-current@freebsd.org Subject: Problems with ATA Message-ID: <4.2.0.58.19991202003302.00953770@pop.uky.edu>
next in thread | raw e-mail | index | archive | help
I've updated to the latest -current, and things have gone awry. At boot,
the console freezes
at the end of the dmesg. The startup process continues, tho, and I can
telnet into the box. Then madness ensues. The contents of some files I
create disappears, top freezes after listing the processes, never showing
cpu usage, &c. Switching to the wd drivers fixes everything. Below is the
dmesg from the kernel with ATA. The previous working kernel was compiled
from Oct. 5 sources. Just ask for any other info you need.
Thanks,
Greg
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Wed Dec 1 23:24:15 EST 1999
root@p66.childers.net:/usr/src/sys/compile/MYGENERIC
Calibrating clock(s) ... TSC clock: 66644219 Hz, i8254 clock: 1193175 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P5 (66.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x517 Stepping = 7
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0023d000 - 0x01ffdfff, 31199232 bytes (7617 pages)
avail memory = 30502912 (29788K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0120
bios32: Entry = 0xf146c (c00f146c) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1450
pnpbios: Found PnP BIOS data at 0xc00f0130
pnpbios: Entry = f0000:1247 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Intel Pentium detected, installing workaround for F00F bug
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 300751879 bytes/sec
bzero() bandwidth = 151125887 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x00000000 (0xff000001)
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x04a3, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1042, dev=0x1000, revid=0x01
class=01-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
found-> vendor=0x8086, dev=0x0484, revid=0x00
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
CPU: Pentium, 66MHz, CPU->Memory posting ON
Warning: Cache parity disabled!
Warning: DRAM parity mask!
Cache: 256KB writeback, cache clocks=3-2-2-2/4-2-2-2
Cache flags: cache-all byte-control
DRAM: page mode memory clocks=X-4-4-4 (70ns)
CPU->PCI: posting ON, burst mode ON, PCI clocks=2-1-1-1
PCI->Memory: posting ON
Refresh: RAS#Only BurstOf4
ata-pci0: <Unknown PCI IDE controller (generic mode)> at device 1.0 on pci0
ata-pci0: Busmastering DMA not supported
ata0: iobase=0x01f0 altiobase=0x03f4
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=50
ata0: devices = 0x3
ata0 at 0x01f0 irq 0 on ata-pci0
isab0: <Intel 82378IB PCI to ISA bridge> at device 2.0 on pci0
Bus Modes: Bus Park, Resource Lock,
Coprocessor errors enabled
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Port 92: enabled
isa0: <ISA bus> on isab0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 a1
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 a1
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0 kbd0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: irq maps: 0x41 0x49 0x41 0x41
sio3 at port 0x2e8-0x2ef irq 3 on isa0
sio3: type 16550A
ppc: parallel port found at 0x378
ppc: chipset forced to generic
ppc0: ECP SPP ECP+EPP SPP
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
bpf: lp0 attached
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
ed0 at port 0x280-0x29f iomem 0xd8000-0xd9fff irq 5 on isa0
ed0: address 02:60:8c:8e:84:d1, type 3c503 (16 bit)
bpf: ed0 attached
isa_probe_children: probing PnP devices
BIOS Geometries:
0:020a1f3f 0..522=523 cylinders, 0..31=32 heads, 1..63=63 sectors
1:026b3f3f 0..619=620 cylinders, 0..63=64 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
device combination doesn't support shared irq0
intr_connect(irq0) failed, result=-1
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio 40080041, tty 4003009a, net 400700ba
bpf: lo0 attached
ad0: piomode=3 dmamode=1 udmamode=-1 cblid=0
ad0: <WDC AC2540H/12.08R30> ATA-? disk at ata0 as master
ad0: 515MB (1056384 sectors), 1048 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, PIO
Creating DISK ad0
Creating DISK wd0
ad1: piomode=3 dmamode=1 udmamode=-1 cblid=0
ad1: <WDC AC31200F/15.05F29> ATA-? disk at ata0 as slave
ad1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, PIO
Creating DISK ad1
Creating DISK wd1
Mounting root from ufs:wd0s1a
wd0s1: type 0xa5, start 63, end = 1056383, size 1056321 : OK
start_init: trying /sbin/init
wd1s1: type 0xa5, start 63, end = 2503871, size 2503809 : OK
Linux-ELF exec handler installed
splash: image decoder found: blank_saver
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.0.58.19991202003302.00953770>