Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 04 Mar 2009 20:17:05 +0100
From:      Sebastian Mellmann <sebastian.mellmann@net.t-labs.tu-berlin.de>
To:        freebsd-ipfw@freebsd.org
Subject:   ipfw (dummynet) adds delay, but not configured to do so
Message-ID:  <49AED3B1.1060209@net.t-labs.tu-berlin.de>

Next in thread | Raw E-Mail | Index | Archive | Help
Hi everyone!

I hope this is the right place to ask.

I've got a IPFW ruleset that looks like this:

cmd=ipfw
bottleneck_bandwidth=100Mbit/s
in_if="em0"

$cmd pipe 500 config bw $bottleneck_bandwidth
$cmd add pipe 500 all from any to any via $in_if

When I do a simple ping from one machine to another (actually the
FreeBSD machine is between those machines), I can see a delay of ~2ms.
Without any rules/pipes I've got under 1ms delay.

The question is:
Why do I have such a "high" delay though I didn't configure any "delay"
in my pipe?
Where does this additional millisecond come from (processing delay for
the packet in the pipe?)?
If I configure another rule (or like 10 more rules) that matches the
packet, I can see the delay increasing.
For example a delay of ~20ms, when I configure 10 pipes.
Am I doing something wrong?

Thanks in advance for any help and please tell me if you need additional
informations (e.g. kernel configuration).


Regards,
Sebastian M.





Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?49AED3B1.1060209>