Date: 13 Nov 2000 01:47:24 +0900 From: NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp> To: Soren Schmidt <sos@freebsd.dk> Cc: freebsd-bugs@FreeBSD.ORG Subject: Re: kern/22634: 4.2-Beta (11/06) Kernel does not detect Slave HDs Message-ID: <868zqpcf37.fsf@xa12.heimat.gr.jp> In-Reply-To: <200011121600.RAA67295@freebsd.dk> (Soren Schmidt's message of "Sun, 12 Nov 2000 17:00:15 %2B0100 (CET)") References: <200011121550.HAA44720@freefall.freebsd.org> <200011121600.RAA67295@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--Multipart_Mon_Nov_13_01:47:23_2000-1
Content-Type: text/plain; charset=US-ASCII
>>>>> In <200011121600.RAA67295@freebsd.dk>
>>>>> Soren Schmidt <sos@freebsd.dk> wrote:
Soren> Uhm this cannot be from a kernel with diff-4.2-1 installed....
Right, sorry. I booted the kernel without your patch. Here is the
right dmesg from a kernel with diff-4.2-1.
The problem seems fixed for me. Thanks.
--
NAKAJI Hiroyuki
--Multipart_Mon_Nov_13_01:47:23_2000-1
Content-Type: application/octet-stream
Content-Disposition: attachment; filename="dmesg-v.20001112"
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #0: Mon Nov 13 01:16:30 JST 2000
root@pcat.heimat.gr.jp:/usr/obj/usr/src/sys/NAKAJI4
Calibrating clock(s) ... TSC clock: 434324346 Hz, i8254 clock: 1193198 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00431000 - 0x0ffe7fff, 263942144 bytes (64439 pages)
config> port ed0 0x300
config> irq ed0 10
config> enable apm
avail memory = 257142784 (251116K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fad40
bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb270
pnpbios: Found PnP BIOS data at 0xc00fbf80
pnpbios: Entry = f0000:bfa8 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f72b0
Preloaded elf kernel "kernel" at 0xc0418000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04180a8.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcib-: pcib0 exists, using next available unit number
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0691, revid=0x44
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d8000000, size 26
found-> vendor=0x1106, dev=0x8598, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0596, revid=0x23
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x10
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000d000, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x11
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 0000d400, size 5
found-> vendor=0x1106, dev=0x3050, revid=0x30
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10b7, dev=0x9055, revid=0x30
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000d800, size 7
map[14]: type 1, range 32, base dd000000, size 7
found-> vendor=0x13f6, dev=0x0111, revid=0x10
class=04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000dc00, size 8
found-> vendor=0x13f6, dev=0x0211, revid=0x10
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base 0000e000, size 6
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x5333, dev=0x8a13, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 26
pci1: <PCI bus> on pcib2
pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 0.0
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: devices = 0x3
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008
ata1: mask=03 status0=50 status1=51
ata1: mask=03 ostat0=50 ostat2=51
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=7f b=7f
ata1: mask=03 status0=10 status1=00
ata1-slave: ATA probe a=01 b=7f
ata1: devices=04
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0
using shared irq11.
xl0: Ethernet address: 00:01:02:c2:15:ad
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 13.0 irq 11
pci0: <unknown card> (vendor=0x13f6, dev=0x0211) at 13.1 irq 11
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe at port 0x330 on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-420J> PRINTER BJ,PR,BJL,BJRaster,BSCC
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x300-0x31f iomem 0xd8000 irq 10 drq 0 on isa0
fe0: EEPROM(SSI): 0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI): f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: EEPROM(SSI):1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c840, tty 63109a, net 67189a
bpf: sl0 attached
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-master: success setting UDMA2 on VIA chip
Creating DISK ad0
Creating DISK wd0
ad0: <ST313032A/3.09> ATA-4 disk at ata0-master
ad0: 12419MB (25434228 sectors), 25232 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
ad0: 12419MB <ST313032A> [25232/16/63] at ata0-master UDMA33
ata0-slave: success setting UDMA4 on VIA chip
Creating DISK ad1
Creating DISK wd1
ad1: <FUJITSU MPE3204AT/ED-03-08> ATA-4 disk at ata0-slave
ad1: 19547MB (40032696 sectors), 39714 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA66
ad1: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: 19547MB <FUJITSU MPE3204AT> [39714/16/63] at ata0-slave UDMA66
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <40X CD-ROM/VER 2.2A> CDROM drive at ata1 as master
acd0: read 171KB/s (6875KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 25433855, size 25433793 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
ad1s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
ad1s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
--Multipart_Mon_Nov_13_01:47:23_2000-1--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?868zqpcf37.fsf>