Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 14 Nov 2000 11:34:46 -0800 (PST)
From:      Rich Wales <richw@webcom.com>
To:        Stefan Molnar <stefan@csudsu.com>
Cc:        Wilko Bulte <wkb@freebie.demon.nl>, freebsd-stable@freebsd.org
Subject:   Re: Bridging code in 4.2RC1 still not fixed
Message-ID:  <20001114192111.06912.richw@wyattearp.stanford.edu>
In-Reply-To: <Pine.BSF.4.21.0011141114030.10599-100000@clockwork.csudsu.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Stefan Molnar wrote:

	> I had bridging plus ipfw working in 4.0-R to 4.1-S for
	> some time.  I only had it crash when I used a tulip card
	> (de0), I used dc0 for the setup.  It did go to a slow
	> crawl, and figured out it was the cards themself, it
	> would goto a crawl with just nat.  I do not have it
	> running currently.  What cards are you using?

The system in question has three NIC's (all PCI):

==> ed1 (RealTek 8029 PCI)
==> lnc1 (Linksys HomeLink PNA)
==> xl0 (3Com 3c900-TPO)

At the time of the test, the 3Com card was installed, but not in use.
I was using PPP (/usr/sbin/ppp) and a dialup ISP connection.  I am now
using the 3Com card as an interface to a DSL hookup.

My LNC driver has been patched to recognize and initialize HomeLink
cards (1Mbps Ethernet over inside phone wiring).  The patched code
works just fine when the system is configured as a conventional router
(not as a bridge).

Rich Wales         richw@webcom.com         http://www.webcom.com/richw/



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001114192111.06912.richw>