Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Oct 2006 13:17:37 -0500
From:      kreios@gmail.com
To:        "Matthew Jacob" <lydianconcepts@gmail.com>
Cc:        stable@freebsd.org
Subject:   Re: Re: Qlogic 2340 problems
Message-ID:  <2de4f2a00610101117o3e9e523by2338f6532ef9172c@mail.gmail.com>
In-Reply-To: <7579f7fb0610100750p456e06a4xaa66d92ef97f16f7@mail.gmail.com>
References:  <2de4f2a00610091524o49c7248fp78387d71dcd43f28@mail.gmail.com> <7579f7fb0610100750p456e06a4xaa66d92ef97f16f7@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 10/10/06, Matthew Jacob <lydianconcepts@gmail.com> wrote:
> That's an odd one. It means that the DMA of the ICB failed.
>
> Three questions:
>
> a) Tell me more about this system

Supermicro PDSMi Motherboard, 1G of RAM, Pentium D 3.4GHz CPU, 80G
SATA hard drive in a 1U chassis.

http://www.supermicro.com/products/system/1U/5015/SYS-5015M-MR.cfm

> b) Is this still a problem for the latest RELENG_6 branch changes?

Have not tried yet. I am compiling it now and will give it a go.  I
have another system that has the same card running 6.1 release that is
working.  I am going to take it down tonight and look for differences.

> c) Can you try a test kernel?

Yes.  The system is new and I have only loaded the OS and just started
testing to make sure all hardware worked before fully configuring the
box.  I have remote serial console, remote KVM, and remote power to
the box so its a good box to play on.

>
> On 10/9/06, kreios@gmail.com <kreios@gmail.com> wrote:
> > I having problems getting this card to attach in FreeBSD 6.1.  dmesg
> > shows the following:
> >
> > Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.10
> > isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x4000-0x40ff mem
> > 0xed200000-0xed200fff irq 24 at device 1.0 on pci3
> > isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xed200000
> > isp0: using Memory space register mapping
> > ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49
> > isp0: [GIANT-LOCKED]
> > isp0: Board Type 2312, Chip Revision 0x2, loaded F/W Revision 3.3.6
> > isp0: 839 max I/O commands supported
> > isp0: NVRAM Port WWN 0x210000e08b8fa3b0
> > isp0: Mailbox Command 'INIT FIRMWARE' failed (HOST INTERFACE ERROR)
> >
> > BIOS has been enabled in the card and the module ispfw has been
> > loaded.  Card works in Windows XP.  Not sure what to try next.  Card
> > is hooked to a Brocade Silkworm 300 switch.  Disks I am trying to see
> > are on an Apple Xserve RAID box.
> >
> > Thanks for you time,
> > Dave

Dave



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2de4f2a00610101117o3e9e523by2338f6532ef9172c>