Date: Fri, 1 Sep 2006 18:48:32 -0700 From: "Matthew Jacob" <lydianconcepts@gmail.com> To: rodperson@adelphia.net Cc: current@freebsd.org Subject: Re: LSI 1030 mpt doesn't work if I build a new kernel Message-ID: <7579f7fb0609011848p1ecc9d4dh47eb259cc3441ddb@mail.gmail.com> In-Reply-To: <1157154024.835.6.camel@atomizer.opensourcebeef.net> References: <1157154024.835.6.camel@atomizer.opensourcebeef.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Can you tell me more precisely what hardware you have? On 9/1/06, Rod Person <rodperson@adelphia.net> wrote: > I've been struggling with this for a month or two now. > > I installed FreeBSD current 7 with a march snapshot and this work good, > but I've tried to build a new kernel for the 2 month period and building > a kernel causes the mpt driver to panic on boot. > > Here is so of the boot message: > > mpt1: [GIANT-LOCKED] > mpt1: MPI Version=1.2.14.0 > mpt1: mpt_wait_req(4) timed out > mpt1: read_cfg_header timed out > mpt1: mpt_wait_req(6) timed out > mpt1: port 0 enable timed out > mpt1: failed to enable port 0 > > then this repeats until the system hangs: > > mpt0: Address Reply: > SCSI Target Command Buffer Reply @ 0xffffffffacc7a200 > IOC Status Success > IOCLogInfo 0x00000000 > MsgLength 0x05 > MsgFlags 0x00 > MsgContext 0x0003005d > mpt0: Reply Frame Ignored > mpt0: Default Handler Called: req=0xffffffff80e49050:95 > reply_descriptor=dc913980 frame=0xffffffffacc7a300 > mpt0: Address Reply: > > I was wondering if this is a known problem or if there are any hints on > correcting this? > > Rod > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7579f7fb0609011848p1ecc9d4dh47eb259cc3441ddb>