Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 07 Dec 95 22:58:40 -0800
From:      "David A. Richards" <drichard@sembilan.uchsc.edu>
To:        questions@freebsd.org
Subject:   Kernel compile & strange error
Message-ID:  <2CC890E06FB@king.dcb.du.edu>

Next in thread | Raw E-Mail | Index | Archive | Help
I have been having major problems with FreeBSD trying to
compile my own kernel. I've installed everything clean
and from scratch. I havent messed around with any directories,
files, trees, etc. Here's what I do:

1) install from scratch Release 2.1.0 bin and kernel source tree
2) copy and configure MYKERNEL
3) cd ../../compile/MYKERNEL
4) type 'make' and everything seems to go fine for a long time
5) then I get an error:	

(the very end of compile-time messaging)
DELAY=15 -DCOMPAT_43 -DPROCFS -DCD9660 -DMSDOSFS -DFFS -DINET
cc -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit  -nostdinc 
-I. -I.
/.. -I../../sys -I/usr/include -DMYKERNEL -DI486_CPU -DBOUNCE_BUFFERS 
-DSCSI_DE
LAY=15 -DCOMPAT_43 -DPROCFS -DCD9660 -DMSDOSFS -DFFS -DINET -DKERNEL 
-Di386 -DLO
AD_ADDRESS=0xF0100000 -c vers.c
loading kernel
kern_sysctl.o: Undefined symbol `_hw_float' referenced from text segment
*** Error code 1

Stop.
bash#


..please help!
drichard@sembilan.uchsc.edu

.here's my kernel config file:

=-=-=-=-BEGIN FILE=-=-=-=-=
#
# MYKERNEL -- custom kernel for FreeBSD
#
#	$Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $
#

machine		"i386"
#cpu		"I386_CPU"
cpu		"I486_CPU"
#cpu		"I586_CPU"
ident		MYKERNEL
maxusers	10

#options		MATH_EMULATE		#Support for x87 
emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
#options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI 
device
options		BOUNCE_BUFFERS		#include support for DMA bounce 
buffers
#options		UCONSOLE		#Allow users to grab the 
console

#options		SYSVSHM
#options		SYSVSEM
#options		SYSVMSG

config		kernel	root on wd0 

controller	isa0
#controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector 
fdintr
disk		fd0	at fdc0 drive 0
#disk		fd1	at fdc0 drive 1
#tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

#controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk		wd2	at wdc1 drive 0
#disk		wd3	at wdc1 drive 1

#options         ATAPI   #Enable ATAPI support for IDE bus
#device          wcd0    #IDE CD-ROM

#controller	ncr0
#controller	ahc0

#controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
#controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector 
uhaintr
#controller	ahc1	at isa? bio irq ? vector ahcintr
#controller	ahb0	at isa? bio irq ? vector ahbintr
controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector 
ahaintr
controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 
vector seaintr

controller	scbus0

device		sd0

device		st0

device		cd0	#Only need one of these, the code dynamically 
grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
#device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr

#controller	matcd0	at isa? port 0x230 bio

#device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 
2.1
#options		XSERVER			# include code for 
XFree86

#device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
#device		lpt1	at isa? port? tty
#device		lpt2	at isa? port? tty
#device		mse0	at isa? port 0x23c tty irq 5 vector mseintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector 
ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
#pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
#pseudo-device	tun	1
pseudo-device	pty	4
#pseudo-device	gzip		# Exec gzipped a.out's






Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?2CC890E06FB>